Looking for the setting for multi color circle effect for photoshop 11. I have used it before, but cant find it again. I was able to change the size of the circle , and only had to pick one color it did the multi color by its self.
View 3 RepliesWhen I manually enter the attribute, it comes up with 3 different data entry options but when I look at the attribute in .NET it shows IsMTextAttribute = FALSE.
What is the best way to set the multiline block attribute?
To the expert here, I have tank foundation with multi circle column under it. How to create or find in afast way the coordinate of each center of column? Any special command for this?
View 9 Replies View RelatedWe have multiple clients and each client has multiple projects. Each project gets its own master assembly that contains multiple equipment layouts. This allows us to show everything together. In each master assembly, we create LODs to display equipment layouts side by side for connecting things one to another and to avoid collisions.
Example: The master assembly may contain 8 equipment layouts. Each layout is for a sub-process within the whole process. We create LODs for different groupings of layouts so that we can zero in on anything in particular that we wish to focus on. By choosing an LOD in the open dialogue box prior to opening the master assembly, performance is improved because we're only opening what we need instead of everything.
Within an equipment layout are any number of assemblies. We can create LODs to show the layout without conveyors or to show different options we've developed to present as concepts for approval prior to detailed design. Sometimes we are adding assemblies to an existing layout so we'll create an LOD for existing, one for as built, one for purposed.
how to create or modify LODs. Therefore, we are getting LODs with users' initials or a date or "doohickey". We've got to come up with something that makes sense now and will make sense later.
Any guideline for managing LODs in a multi-user environment?
At tut "Multi-Layered Ring effect", step 4 we find this paragraph:
"Rename this channel to bevel. Once you have renamed the channel to bevel go to Filter/Blur/Guassian Blur and choose a value of 8. Then Guassian Blur it again with a value of 5, and one more time with a value of 1."
Why can't we put a bigger value to the gaussian blur effect, instead of repeating it three times with differents values? If i put 14 for the Gaussian value once, isn't it return with the same effect?
i'm learning the tut "Creating a Multi-Layered Ring effect", then when i've got at step "5", i had some problem, it tells us to "ctrl click" layer alpha1 at channels window, then go back to layer window and keep selected ring1 layer, but it doesnt work, cause i can't keep both layers selected, when i go to the apply lightning effects and change all the values to those mentioned at the tut, all i have back is a dark image, nothing alike to that one at the tut.
View 2 Replies View RelatedI use a wacom Bamboo CTH661 tablet.
When I draw a perfect circle with the tablet, I get an ellipse on the screen, but when if I draw a perfect circle with the circle tool, I get a perfect circle on screen.I hand draw the circle with a round frame, so I'M sure my "handmade" circle is perfect.
Distortion is not very hard, but this mismatch makes sketching harder and I'M not so skilful. I have this problem on both photopaint and Draw x5I. Is there some way or setting on Draw X5 ( and photo paint) to set the tablet and Draw X5 together so I will get what I draw when I sketch ?
I have a Multi-Value Parameter "MV" that I want to populate using a Named Range from an Excel file that is already populating other parameters for the same file.
I currently have the file working by populating "MV" by using the snippet from iLogic below...
MultiValue.List("MV") = GoExcel.CellValues("filename.xls", "Sheet1", "A2", "A10")
The reason I don't like this method is because if ever that range changes... all the iLogic code will have to be updated as well. How to set a Multi-Value Parameter using a Named Range from an Excel file? I assumed the below snippet would work but I am receiving
"Array was not a one-dimensional array." as an error.
MultiValue.List("MV")=GoExcel.NamedRangeValue("Named_Range_Value")
effect/program i need to use to get the circle effect that is going on in the background?
View 2 Replies View RelatedHow can you use a feathered effect in a circle? So, the outher border off the circle is Opacity 100 and the inner border is Opacity 0.
View 2 Replies View RelatedThis is an image of a cover photo style I am trying to copy. I'm having trouble making the circle with the drop shadow effect that is being shown by the red arrows Attachment 36187 So far i've made this background photo, but when I draw a circle on the green part it gets pixeled created the circle with the drop shadow effect?
View 2 Replies View RelatedI'm looking how to achieve the circle ripple'ish effect that can someone be seen in the outer points of image marked with "1" - (ignore the lens flare itself, don't want it there). I've just played around with some tools to see if I could get somewhere near the effect - this is not quite perfect though. The image marked with "2" got a very low opacity example of this.
Im looking to do something like nr "2" with the white "ripple"/glow'ish effect. I figured it could be done in a manual combination of -> making a circle shape -> applying some effect to it -> copy the layer -> scale it down etc. But haven't been apple to find a useable combination and was hoping there perhaps were some filter or other method.
EDIT: click the image to see it correctly
[URL]...........
how to recreate the background in this print?
View 1 Replies View RelatedI was making a website and I wanted to make a pattern that looks like one color turning into another color by way of small circles increasing in size. I've created a small mock-up of the type of effect that I want to make, and what is the name of the effect, or how to do it. But for some reason it doesn't let me post the image.
View 2 Replies View RelatedI made the stop motion effect by the multi trim,and every time after 35-50 sec the software crash,i have to save my work every time before the vs4 crash,what should i do?
View 2 Replies View RelatedWhat is the term for a multicolor fringe around an edge..how do you get rid of it
View 2 Replies View RelatedI have an image that uses about 20 different colors (there are 2 colors that dominate the image). I want to reduce the image to just those 2 main colors. How can I do that in Photoshop CS2 or Illustrator CS2?
View 1 Replies View RelatedFor a long time I have been struggling to find a good workflow for what I would call "multi channel color separation". What I want is to reduce a full color RGB image into an image with only a limited number (e.g. 5-8) well-chosen colors, for instance to use as set of masks for screen print. (I'd also like to use this as an effect in itself, mimicking a typical 'screen print' or 'litho' effect on an inkjet print)
The idea is to create a set of monochrome layers or spot color channels. Colors are to be selected by myself (so not necessarily RGB or CMYK). Each channel/layer has to be a continuous tone that I transform myself into a dedicated half tone screen (e.g. with the Andromeda screen filter).
Till sofar it is clear to me. My issue is: How to separate the image in the predefined set of colors?
I can not just select a color range: I can adjust a "tolerance" but that is too general. I need the pixels of with a specific hue but with the full range of lightness (e.g. all the purple pixels that range from dark/medium purple to very light purple). The dark colors can be made dark with a black channel. I'm not sure how to deal with the saturation range.
An approach that gives sometimes a result that is to some extent acceptable is to transfer from RGB mode to an Indexed Color mode and use a custom palette. However, this does not give much control on the halftone screening process.
I envision for instance an approach of filling a layer with a solid given color, select in one way or another only those parts that correspond to the original image and subtract that layer somehow from the image. This process is then to be repeated for each color. Up till now I have not been able to figure the right options to do this. But maybe there is a better way to do it.
One final wish: it would be great if the process can take into account that some layers in the final print are (semi-)transparent. In my opinion this would exclude just selecting a color and deleting de pixels.
Trying to change the blue color in this abstract image (see image) to a much darker green (pantone 561) Any way to do this easily? I am not coming to close to this new darker green color.
View 3 Replies View RelatedAbout a year ago I created this picture using gimp (ignore the text) .
My problem is that I have completely forgotten how I did it and now I need to know how.
So how to create the blend effect in the upper right of the circle (again don't worry about the text)?
The color picker in CS4 has 2 options: "actual layer" and "all layers".
I get the same values on multilayered documents no matter what option I take.
I have a german version of CS4.
I created a 3D drop shape and need to totaly change the colors (from red to yellow)... I use illustrator CS5
View 4 Replies View RelatedI'm working in the multi-channel format, which as you may know, does not support layers.
Does anyone have any tips on experimenting with the layout, without the use of layers?
At the moment, I've been working out the layout in another (layer-supporting) colour mode, and then recreating that layout in the multi-channl mode.
Surely there is a better way of testing different layouts, within the multi-channel mode itself? I'm finding it very inflexible at the moment.
I am kinda new to image editing and I am wondering how to do something like on the news (the weather reports in particular) where the replace/add the landscape to a green/blue background. I would like to do it with a white background and have it replaceed with something more interesting. The closest I can find is the color replacement tool but that is not quite what I want to do. Any ideas?
View 8 Replies View RelatedIs there an easy way to create stripes, multi-color dots, etc?
View 2 Replies View RelatedI need to find a way how to insert a point or a * on the center point of a hole and put it on a different layer. The reason for this is - I am a CAD tech for a welding shop and we cut parts out of steel and we use the dxf file format for our plasma table to cut parts. For example : if i have a 1 inch thick plate and want to put a 3/4'' hole in the plate the hole will be distorted because the hole is smaller than the material thickness. For these situation we can use the plasma table to burn a point or a dot on the center point of the hole. But to do this the point or dot must be on a different layer in the dxf.
View 2 Replies View RelatedI am a Graphic Designer for a print shop and we just had a large document printed that looked to be in black and white but must have been in color somewhere (gray boxes) and used more clicks on the printer than we wanted. I'm wondering if there is a quick way to check a document like this in CS5 programs to see if it is truly in black and white or if there is something in there that is RGB or CMYK.
View 7 Replies View Relatedi am colourwashing a site plan for presentation purposes.
how can i blend within the green circles, as shown on the trees on the attached part site plan?
Color Settings
Settings Web Graphics Defaults witch i have pick.
Advanced Mode do i need to tick that box (yes all no)
Working Space
RGB: sRGB IEC61966-2.1
ColorMatch RGB
Apple RGB
Adobe RGBB (1998) and i'm perty sure i pick this one
CMYK: Us. Web Coast (SWOP) v2
U.S. Web Uncoasted v2
U.S Sheetfed Uncoated v2
U.S Sheetfed Coasted v2
Japan Standard v2
Euroscale Uncoasted v2
Euroscale Coasted v2
Load CMYK
Save CMYK
Gray: Graym Gamma 2.2
Gray Gamma 1.8
Dot Gain 30%
Dot Gain 25
Dot Gain 20
Dot Gain 15
Dot Gain 10
Color Management Policies
RGB Off
Preserve Embedded Profiles
Convert to Working RGB
CMYK: Off
Preserve Embedded Profiles
Convert to Working CMYK
Gray: Off
Preserve Embedded Profiles
Convert to Working Gray
when i design something in photoshop and i use certain color like #9BABD0, when i save for web it lookes different, different color then on my photoshop canvas....
i played around with solor setting and preferances but nothing so far...
I am trying to acheive the same angle gradient effect that can be done in Photoshop but in Illustrator. The actual thing I want to be able to create as a vector is the graphic attached...
Can this be done by somehow using the blend tool and replacing the spline with a circle?