when i design something in photoshop and i use certain color like #9BABD0, when i save for web it lookes different, different color then on my photoshop canvas....
i played around with solor setting and preferances but nothing so far...
Color Settings
Settings Web Graphics Defaults witch i have pick.
Advanced Mode do i need to tick that box (yes all no)
Working Space
RGB: sRGB IEC61966-2.1
ColorMatch RGB
Apple RGB
Adobe RGBB (1998) and i'm perty sure i pick this one
CMYK: Us. Web Coast (SWOP) v2
U.S. Web Uncoasted v2
U.S Sheetfed Uncoated v2
U.S Sheetfed Coasted v2
Japan Standard v2
Euroscale Uncoasted v2
Euroscale Coasted v2
Load CMYK
Save CMYK
Gray: Graym Gamma 2.2
Gray Gamma 1.8
Dot Gain 30%
Dot Gain 25
Dot Gain 20
Dot Gain 15
Dot Gain 10
Color Management Policies
RGB Off
Preserve Embedded Profiles
Convert to Working RGB
CMYK: Off
Preserve Embedded Profiles
Convert to Working CMYK
Gray: Off
Preserve Embedded Profiles
Convert to Working Gray
Why does my color setting change on images set and saved in Photoshop 5 (MAC). When I use Camera raw to vignette my images and then save them and re-open them the color setting change and flatten out the color or is it just a isolated quark of my own?
If I open them directly from Mac OS X 10.7.4 and vingnette in photoshop not through Camera raw
I'm brand new to CS3 and working with the trial version and trying do something as simple as setting a color for a layer (i.e. black or red). When I select the foreground or background icon I get the color picker then select the color and click ok... nothing changes.
View 3 Replies View RelatedWe done a photop for brochure & convert to RGB to CMYK, Can i take any color setting in my Photoshop CS5 (I have a MAC)
View 4 Replies View RelatedOccasionally I select part of an image, apply a hue/sat adj layer, check colorize and attempt to re-create an RGB color on that selection....but it all seems to be trial and error, hunt and peck method of moving HSL sliders or entering numbers.
I tried matching the "numbers" to an HSL equivalent of the desired RGB color but not much better/faster desired results.
I realize the image has a range of tonal values so hitting the exact number overall is not do-able using this method, nor is it the goal (otherwise a simple paint bucket fill would work). But at least somewhere in the selection image I'd want to be sure my color is very close.
I tried using eye dropper color sample spots (up to 4), which works, but the process is slow and fiddly.
My goal is to be able to re-color/colorize part of an image to match an RGB sample color, yet leave the tonal range in the image still looking like it is part of the scene; including shadows and highlights and midtones.
Is there an easy way of setting matching Color Profiles on a Mac ?, To simply ... Loading an Image into default Mac App "Preview", shows different to the Image when loaded into Photoshop. Is there a simple way of making the Color Profile the same ?
However there might be a slight problem, the Thumb preview (in App Preview) shows different to the Image showing. This changes differing on the dependance of Photoshop's Embedded Color Profile.
Is anyone having problems with RGB and CMYK color setting in illustator and photoshop CS2
in my swatches panel my black comes up with html color ref #221E1F should be #000000
white fine #FFFFFF but all the other color are not. there is also a problem with gradients.
Looking for the setting for multi color circle effect for photoshop 11. I have used it before, but cant find it again. I was able to change the size of the circle , and only had to pick one color it did the multi color by its self.
View 3 Replies View RelatedI have a layer with some blurred spots. I want them to glow. I have a colored background (light brown). For some reason, when I set my layer to Color Dodge it does nothing.
But when I make a group and set it to Color Dodge, then put my layer inside that, it glows like freakin crazy. Can anyone explain why this is? Should it work both ways? Is there some magic to groups?
I'm using Photoshop Extended CS6. I'm printing to either an Epson Stylus Pro 9900 or an Epson SP4900. In the print dialog, I get a warning I haven't seen in a long time. It says the setting "No Color Management" at the printer is not supported. This is patently false. I am given a link to download the Adobe Color Print Utility (which gives abominable results; I know this from repeated uses in the past), and a service note saying this issue is for Photoshop CS5. Clearly there is a problem, possibly a bug.
I have never had CS5 installed on this machine. I do have PS CS5.5 and PS CS6 on this machine (I have used all versions of CS in various suites from the start of the product line). Of course "no printer management on printer/Photoshop manages color" works..
As soon as you set a color for a layer listed in the layer window, you can't undo that. The "no color" selection in the context menu does nothing. Looks like a bug.
And btw. on page [URL] ...... the link "User Groups" points to [URL] .... which isn't delivering anything ("No data received").
I'm creating a document with this background color #3399ff, and this color font #b4fff8. Neither of which sticks.They change slightly as soon as I close the color picker box. what I need to check?
View 3 Replies View RelatedInventor uses a gradient-fill gray background for the 3D views. This has many annoyances, such as parts of the image disappear at certain rotations because they render to the same color as the background. More seriously, when I want to print the orthogonal 3D view, I get the gray background on the printout, which looks profoundly ugly, and obscures some of the critical information I want to see.
Is there a way to either (a) change the background to something other than gray-gradient? (I'd settle for something like light-blue-gradient, for example) and (b) tell the print command to not print the gray background (but if I change it to solid white, this would solve the problem)
I am be able to publish to PDF, but unsure how to set the color mode to CMYK?
View 2 Replies View RelatedI receive drawings from a company that uses a custom color of 0,0,255 in their drawings and it plots out blue even on monochrome. How can I make a pen setting so this plots out black?
View 5 Replies View RelatedWhy does a sketched symbol have a SetColor function even though it doesn't do anything? For example, this is "legal" code, but it won't do anything.
oSymbol.Color.SetColor(255,0,0);
On the other hand, this is the proper method to set the color of a sketched symbol (I could not find this anywhere in the api)
oSymbol.Color = _mInventorApplication.TransientObjects.CreateColor(255, 0, 0);
I need a fast method (Keyboard shortcut) to change stroke color to a specific color. Since I need to set it always to the same color. I'd like to skip the procedure of having to repeatedly pick red from the palette and simply have red chosen automatically using one click only. I tried recording an action, hoping I would later be able to assign it a shortcut but oddly when an action that records the setting of stroke color is played, it sets the FILL color to that choice color and instead of setting the stroke color (with which it was recorded).
View 4 Replies View RelatedIn previous versions of CorelDraw, I could set the default color palette for the fountain fill. But in X6 it doesn't seem to hold. Especially for the second color. It keeps going back to CMYK (even when color management is set to RGB) and when I click on palettes in the fountain fill box, it defaults to Pantone, so that I must click through many options to get back to my palette.
View 11 Replies View RelatedWhen I use Adjust --> Color Balance and use the temperature slider the cool <---> warm seems to work as expected (i.e. my image becomes more blue to the left, more red to the right).
When I click the Advanced Options box, the slider labels are the same, but the behavior swaps: so the Cool label is still on the left, BUT when side the handle to the left, my image becomes more RED, & if I slide to the right (labeled warm) my image becomes more blue.
I have imported a number of raster images into a drawing and wish to turn the "blank" bits transparent. I can set them all to "Background transparency = YES" in the Properties bar, but as far as I can see I need to go through each one individually to set the relevant transparency color, since as soon as I select more than one tile the "Transparency color" tab disappears.
Is there a way to do a multiple select as the "blank" color is the same for all the tiles? I'm planning to use a lot of tiles and this will be incredibly laborious and inefficient otherwise. I am using Map 3D 2011.
corel.jpg
I have a problem with the color management of my corel Photo Paint X4.I create Flyer in CMYK and the color management is set as you can see in the attachment.On screen all colors are correct, but when i print something the colors look like it ignores the color management settings for the printer.
When i open the same document in my old Photo Paint 10 with the same color management settingsthe printing has the right colors...
Best practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.
i would like to know if the ram setting slider in photoshop preferences/setting is meant to be for all the available ram in the computer or all available ram, which stays free from all other sametime running apps? for example, if i run osx 10.8 or 10.9, i use to run ONLY photoshop and no other app besides, so the finder would need maybe 2 or 3 GB RAM, and the rest is for photoshop.does the ram setting count with finder ram consumption or without?
my imac has 32GB RAM - so, if i set ram to 70% (out of 32GB) in photoshop settings, the finder can use 30% of 32GB, yes? anyway, it won't show "available ram is 32GB" in the settings, it shows less than 32GB would be available, so is this the answer to my question?
could i set it to 80% or 90%, when i only run photoshop (cs5 / cs6 / cc) and no other app besides? (only the 10.8.5 or 10.9 finder) or would this mean performance lags in photoshop?
Is there a way to make the setting of all the windows smaller and therefore have a bigger space area? I need Layers, Actions, Color, Navigator and Tools open at all times, but they take almost 30% of my work area.
View 5 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI'm testing out Photoshop CS6 to see if there's much a difference between CS5, and i'm noticing that there's no Recovery mode in Camera RAW for my file, they seemed to have changed Camera RAW a lot.
Is there no Recovery setting anymore? I have been using this since CameraRAW essentials, which Adobe ended up purchasing so i had to use Camera RAW.
I have a graphic that is
C 100
M 100
Y 100
K 100
When I move this over to Photoshop it converts it to a smart object and gives the colour a profile of
C 75
M 68
Y 67
K 90
I cannot see when I have gone wrong in my colour setup.
We done photo shoot for our client, we received all pic from .CR2 file,We have .cr2 convert. i am not a familiar in .cr2 or RAW IMAGE . what is the fundamental setting done for RAW image or .CR2 image.
View 7 Replies View RelatedHow do I set up CS6 preferences?
View 3 Replies View RelatedMy workspace doesn't have the main screen (background) I don't know why.all panels work except for the above. My workspace is set up for "Essentials".
View 1 Replies View Related