how I can get a screw effect? Not the screw head, but the winding of it on it's body. Sort of like a tornado's winding. I checked out the shear filter but it's not doing what exactly what I thought...
View 6 RepliesI open a picture, the picture is darker than it's suppose to be.
Even when I copy a picture from Paint, the brightness is still screw up.
Experiencing some difficulty slotting the cap screw shown. The problem is this: an additional sketch is created using a rectangle .313 * .094 centered .2815 * .047 from the center of the screwhead. The sketch gets finished the extrusion is created but does not show up. The extrusion is not visible even though a new sketch was created.
View 5 Replies View RelatedHow to properly model a screw thread around the point of the screw.
I have gotten the coil to taper to the point, however, I'm unable to get thread to terminate properly.
Essentially, the pitch remains the same as it moves down the taper, but the major/minor is diminishing until it terminates cleanly at the point.
I have designed a wooden bracing system and added the wood material properties for the part in Inventor 2012. My question is this - does Inventor have the ability to add stainless steel wood screws to the assembly to make this a 'real world' situation prior to me doing a stress analysis on it ? Something similar to the bolted connections for metal assemblys but for screws in wood is what I'm looking for.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I'm trying to draw standard flat head socket cap screw size 1/4-20 with 5/8 length. I've tried to draw it with the exact dimensions (converted inches to mm) but the head doesn't turn up correctly.
I've done metric screws with dimensions from that site (mcmaster-carr) and they turned out just right.URL....
How do you create a dynamic wood screw block with lookup functinality so that you can select, say, 20mm, 25mm, 30mm screws ect. ect., and both the length and threads change acordingly? Got as far as a lookup for the length with a stretch action but cant get the threads to array acordingly!
View 2 Replies View Relatedimagine a sheet (big black rectangle), then red rectangles are putted into corners.
I want to have one subassembly - red rectangle with screw/bolt or whatever you call it, but i want to change position of screw if necessary (this screw needs to be a part of kit/subassembly) but I do not want a situation when this new screw position is the only reason of making new subassembly.
I tried Position in representation but I can assign constraints only to master level.
I am using Autocad 2012 I have got a solid model with a lot of nuts and bolts, is it possible to get the nut to screw up the bolt (so it looks like it is moving up that bolt) also other parts also move it would be nice to make them look like they are moving to.
View 7 Replies View RelatedI need a screw M16 x 0.25 mm. However, I don't have the option "0.25mm". How to create a screw with custom pitch size?
View 2 Replies View RelatedI've been trying to make a male and matching female screw and fitting for attaching two parts that will be 3D printed. However, whenever I export the part to an .STL file, the threads do not show or print properly.
View 4 Replies View Relatedi constantly have problem inserting a flat head screw. i have to always manualy orient it , coincide with the hole then flush the screw head to a face..
View 5 Replies View RelatedI am pretty familiar with Assembly constraints but I want to know how do you constrain/motion a screw or similar object to be able to turn appropriately whilst going up & down a threaded hole?
View 6 Replies View RelatedI want make Screw Shaft from sheet metal and make Flat pattern.
[URL]
I am using these set limits within a drive constraint so
to show the Jack opening & closing.
Although it can now open & close with ease,
how I can make the crank turn with the screw rod at the same time as the scissor car jack opens & closes.
I have made a landscape model in meters as units in the modeling area. Now, when I want to scale the drawing in the paper layouts, within the viewport, it seems to me like it's scaling as if the drawing was done with millimeters as units.
I think this might have been caused by me starting to draw, thinking I was plotting in with meters as the unit, but then found that it was set as millimeters. I changed the unit setting for the model to meters and that seemed to work fine. But I'm guessing it didn't work.
I have tried using the INSUNIT command and it says the drawing is in 6, which is meters, so why is it scaling as if it was in millimeters on an A3 layout?
Using Autocad 2000 LT. Need to create a 2D basic drawing showing 14 TPI external and internal threads with a certain class of fit joined togeather. The basic drawing needs to be drawn in such a way that it could be easily changed to show different Threads Per Inch and or class of fit. Then, with that approach in mind, what would be the basic steps I should take in order to create the basic drawing and then easily change it to show different TPI and or class of fit. Note: I only need to show the external and internal threads, not the entire screw or object attached.
View 6 Replies View RelatedI am looking for a formula that will allow me to generate flat layouts for screw conveyor flights.
View 9 Replies View RelatedI'm trying to make a view showing a motor-jackscrew unit with the jackscrew at the fully retracted position and also with the jackscrew at the fully extended position (in phantom). Refer to the attachment.
My initial plan was to have two views in the drawing, one retracted and one extended, and then just align them vertically and horizontally. But it turns out that you can only align vertically OR horizontally, not both at the same time. So I created an assembly of two iAssemblies, one with the screw extended and one retracted. Then I made the drawing view from the direction that placed the extended assembly directly behind the retracted assembly.
May I know how to pattern the ball in BALL SCREW assembly?
View 9 Replies View RelatedI have attached an image of a butterfly with a broken effect on its wings. You can see the effect inside the marching ants. How do i get this kind of effect?
View 2 Replies View RelatedAs shown in the upcoming movie "a scanner darkly".
With keanu Reeves.
Sort of like GTA(video game) graphics on the game case.
I'm making some graphics to be printed on a car. I have some lines with outer glow on them, but Illustrator won't render these unless I use 72DPI in raster effects reslution. I would like to go higher, but it won't give me anything. Guessing it's to heavy for Illustrator maybe? Is there anything I can do about this? I'm making my graphics in 1:1 scale, but I do it in a lower scale since it's just vector art anyway, however how would that effect my glow? Since it's a raster effect.
View 9 Replies View Relatedhow do l get the chrome effect on my solid model also the effect of metal's. I've been using AutoCad Colour Index - True colour and Book Colour, but it just doesn't look right.
View 5 Replies View RelatedI created a 3D drop shape and need to totaly change the colors (from red to yellow)... I use illustrator CS5
View 4 Replies View RelatedThis happens in all versions I have been able to check in - CS5.5, CS6 & CC.
Repro: Import any footage to a new project - any resolution or frame rate. Create new composition from clip. Type in "Crop" in effects search Double click to load it. Result is an effect called "Wigglerama" & "transform" gets loaded instead of the required "Crop" effect
See attached image below - cannot believe I never saw this before
Have a project and need to find a way to produce a x-ray effect on a object.
Some methods have entered my mind on how this could be accomplished - > inverting the excised object from my photo(s) > desaturate the objects > inject some artificial luminescence with glow or lighting effects > create a canvas for the x-ray - Before any serious time is invested I thought it would be a good idea to see if anyone has done this before, or has any ideas.
how I can create this effect. Can I do that directly with a specific tool or do I have to follow several steps to reproduce something similar.
View 6 Replies View RelatedI want to take a photo of a tree like this and do a similar gradient/grainy effect as the one in this . Any idea how I can do it?
View 2 Replies View RelatedI want to put a Sun onto an existing photo that looks very similar to this with all of the beams coming out, to make it look very realistic. Has anyone got any tips on how to create this or a good tutorial i could look at?
View 2 Replies View RelatedI've tried converting my image to grayscale then to bitmap, round halftones but I cannot achieve a similiar effect. Was this done another way? I was thinking the frequency (lines/inch) of my halftone was off, would there be a rule to follow as to how many lines per inch depending on image size?
View 3 Replies View Related