AutoCad :: Drawing Joined External And Internal Machine Screw Threads
Nov 25, 2011
Using Autocad 2000 LT. Need to create a 2D basic drawing showing 14 TPI external and internal threads with a certain class of fit joined togeather. The basic drawing needs to be drawn in such a way that it could be easily changed to show different Threads Per Inch and or class of fit. Then, with that approach in mind, what would be the basic steps I should take in order to create the basic drawing and then easily change it to show different TPI and or class of fit. Note: I only need to show the external and internal threads, not the entire screw or object attached.
View 6 Replies
ADVERTISEMENT
Apr 4, 2012
How to properly model a screw thread around the point of the screw.
I have gotten the coil to taper to the point, however, I'm unable to get thread to terminate properly.Â
Essentially, the pitch remains the same as it moves down the taper, but the major/minor is diminishing until it terminates cleanly at the point.
View 9 Replies
View Related
Jun 10, 2013
I've been trying to make a male and matching female screw and fitting for attaching two parts that will be 3D printed. However, whenever I export the part to an .STL file, the threads do not show or print properly.
View 4 Replies
View Related
May 2, 2012
I can't tell if this is a bug or a "feature."
I have created a custom thread.xls table so that thread callouts are in decimal format per ASME B1.1.
When I use the Hole / Thread feature note in an .idw, the thread class will not show on an external thread. If I change the format to not use Custom Thread Designation, the thread class appears. If I use the Custom Thread Designation on a threaded hole, everything works fine.
View 1 Replies
View Related
Aug 12, 2009
my internal driver is full on my laptop. I have to either buy a new external HD (500GB/7200rpm) or change to a larger internal one (500GB/7200 or 5400rpm). I am aware the external one will be lower compared to internal one. is it acceptable? I think that PS will use HD only when opening and saving the photos. It uses memory and scratch disk (configured on internal one) most of the time. I can not add the second internal HD. Only Photshop CS4 and MS office installed on this laption which is only used for PS. OS is window 7 64-bit with 4GB memory.
View 1 Replies
View Related
Nov 22, 2011
I'm trying to draw standard flat head socket cap screw size 1/4-20 with 5/8 length. I've tried to draw it with the exact dimensions (converted inches to mm) but the head doesn't turn up correctly.
I've done metric screws with dimensions from that site (mcmaster-carr) and they turned out just right.URL....
View 7 Replies
View Related
Jan 8, 2014
my internal iMac 1TB HD is at its limits and so I bought a 3 TB external HD, but I don`t know what to do...I want to have all the data on the external HD...
View 10 Replies
View Related
Aug 10, 2013
I've been working up a window family that includes a correction for sizing the window to the structural core rather than a finish (plaster and render) which is what Revit does by default.
Â
I've managed to get the system functioning correctly at plan reveals - but for some reason, the finishes will not wrap at window head / cill level. I've set up 2 wall closure ref planes - called 'Closure External' and 'Closure Internal' and used these to control the extent of the finish wrapping.
Â
I've gone away to check the perfomance of the standard revit window families - and all of them seem to do the same thing, and fail to wrap any of the finishes at the window head despite wrapping correctly at plan reveals.
Â
In all cases above - the walls are set to wrap both internal and external at inserts.
View 3 Replies
View Related
May 27, 2013
I have lightroom 3.6 on a Mac running OS 10.6. I am in the process of moving my picture library from the internal drive to an external drive because my internal drive is very full. I plan to have the LR catalog remain on the internal drive as others have suggested LR will run faster if the catalog remains on the internal drive.Â
Â
I initiated the move process within the LR library, by selecting all photos within about 150 folders inside a master "my photos" folder on the internal hard drive displayed in the library module of LR. I then dragged them into the new "my photos" folder I created on the external drive which was displaying inside the LR library module. Â
Â
First question, this moving process is progressing so slowly, at a rate of about one picture every second. is this normal?Â
Â
Second question: When I open the external drive by clicking on the drive itself, outside LR, it seems the pictures are flowing in without any of the original subfolder structure that was present on the internal drive.Is something wrong that I don't see the subfolders on the external drive? I want to preserve this structure and of course see it show up in the LR library for the external drive.
View 4 Replies
View Related
May 29, 2012
I used a trial version of Lightroom 4 and imported about 300 photos from my internal imac hard drive to tinker with during the trial. So when I first set LR up, the catalog was connected to my internal hard drive, via the Pictures folder. Then when the trial ended, I bought the software and installed it but in the meantime had transferred all my photo libraryfrom my computer internal hard drive to an external hard drive. Now that I have the LR 4 software and am no longer using the trial, I'm ready to import all my photos to Light room. My question is how to I change my LR catalog (which currently contains the 300 photos I imported during the trial period) to link to my big photo library which is now on my external hard drive, instead of linking to my computer's internal hard drive
View 3 Replies
View Related
Feb 13, 2014
I have experienced the following behavior:
Â
1. Adding Effects to a path applies the effect but the effect is not visible in the Appearance panel.
2. In conjunction with this, it appears that internal stroking of the object creates a weird offset. The stroking is visually incorrect. The stroke generally offset by -1 on each axis. If the object has had a rounding effect applied to it, some of the corners become mangled.
View 1 Replies
View Related
Sep 21, 2012
I have to move all my picture files from my internal hardrive to an external hardrive. How do I ensure that Lightroom 4 will find both them and it's own Libraries?
View 1 Replies
View Related
Oct 19, 2012
I am running out of space on my internal hard drive on a MACBookPro and would like to move my photoes to an external disk and keep the catalog pointing to them. They are currently in nicely named folders and I would like to keep them that way. How can I do this?
View 1 Replies
View Related
Jun 22, 2011
I need to cut some flat veneer using a laser machine, like making a jigsaw puzzle. The laser operator needs a drawing in the .dwg format.I will be drawing a 2d shape using a photograph in the background to copy.
I need to make the shape cut up into sections so I can assign a different bitmap to each section, at least for the design part of it. Since I'm more familiar with Max it'd be easier to do the design work there and export the file.
What I need is to make 2 or more closed spline objects that share adjacent lines so that each section has a surface that can accept an individual bitmap.
View 9 Replies
View Related
Jul 29, 2013
Currently I'm converting one of our machines from AutoCAD to Inventor 2009.
This machine can vary from 1200mm to 1600mm and has a couple of options to choose from for our customers.
These dimension changes are all driven by a single excel file and the options are controlled in the an IAssembly.
Some of the 2D drawings will have a variable width, in our ERP system they are marked width dependable as followed: "partnumber/1200" or "partnumber/1410" in which 1200 or 1410 is the machine width.
Is it possible to have the 2D drawings automatically update the partnumber? so if I configure my machine as a 1200mm machine it automatically changes my drawingnumber to the actual machine width?
View 1 Replies
View Related
Aug 4, 2012
Got a new computer. Copied and upgraded Photoshop CS2 to CS5. I would like to give the old computer to a family member or friend. Will they be able to use the CS2 on the old machine? (an iMac 10.6) or is that the end of that CS2?Â
View 32 Replies
View Related
Apr 27, 2011
Like when I draw a cylinder, instead of a solid cylinder I get two circles joined by two lines. How do I change this so that I get the solid?
View 3 Replies
View Related
Jun 19, 2013
I want to load the external references in the drawing, how to implement this program?
I returned to the drawing path and the way I want to load it using the insertion point.The code error is probably somewhere not understand where.
[CommandMethod("TDMSXREF", CommandFlags.Session)]
publicvoid TDMSXREF()
{
 Document doc = Application.DocumentManager.MdiActiveDocument;
 Database db = doc.Database;
  Editor ed = doc.Editor;
[code].....
View 1 Replies
View Related
May 29, 2012
I am trying to extrude some joined polylines, arcs etc. The problem is some of them are extruding as a solid, which is what I want and some are extruding as a surface of the profile.
View 8 Replies
View Related
Apr 18, 2012
I have working code for opening a cad drawing from an external program. That is perfect.
how can I force a drawing that is NOT readonly to open as readonly from outside cad.
View 9 Replies
View Related
Feb 26, 2013
I am attempting to import an external drawing into my own template. However this particular drawing refuses to insert. I have inserted quite a few from the same source but this one will not insert.
View 9 Replies
View Related
Jan 31, 2012
I've been asked to create several drawings using one external reference which contains doors, bund walls, lighting etc. My question is how do I take this external reference and create several new drawings when I cant even turn layers on or off once I have inserted it onto my new page?
View 4 Replies
View Related
Jun 18, 2012
How are normal lines joined together to make one poly line? Learning on Auto CAD 2010.
View 4 Replies
View Related
Jun 4, 2013
Is there a way.....
I have a drawing that has external references bound to it. I would like to extract the bound external reference to its own drawing. Can this be done?
View 8 Replies
View Related
Nov 28, 2007
Im drawing on autocad 2008, but im having some trouble with trying to explode an 'external reference' this external reference needs to be edited.
I opened a DWT renamed it and saved it as a DWG, then i used the INSERT/EXTERNAL REFRENCES/ATTACH DWG to bring in drawing. When i select the explode button i cant select the drawing i need to edit.
View 8 Replies
View Related
Dec 11, 2013
I have a Shapefile layer added to the map via FDO. I joined it to a SQL Server based table via ODBC. I can see all the data (shapefile & ODBC table) correctly in the attribute table, but when comes time to "Query to Filter Data...", only fields in the Shapefile are available and displayed in the Filter dialogue. I want to be able to Filter using fields in the joined. If I export that same Shapefile to an SDF and THEN try the same join and filter, all the fields from the SDF as well as the joined ODBC table are available in the filter dialogue.
View 8 Replies
View Related
Jan 21, 2013
I have three drawing constructs.I have door tags and room tags. I have schedules. All work just fine. However, I need to combine all three Finish and all three Door schedules into one multi-level schedule for each, doors and finishes. In views, I schedule the external references by selecting the YES option in the properties dialog box. The problem is that the drawing contains doors and spaces that I do not want to be part of the schedule. How do I deselect the objects that I want to be in the schedule?
The other problem is I can only select one drawing. It makes no sense to have separate schedules for each floor on a small project where there are only 10-20 rooms. As a work around I can create the schedules in constructs, import all the constructs into a view, clip all the constructs and the stitch the tables together. This is cumbersome, does not update seamlessly and results in unnecessary file sizes.
View 5 Replies
View Related
Nov 10, 2012
Is it possible to contol the visibility state of an external referenced drawing? I have an architectural plan drawing that uses a titlesheet drawing as an external reference. In my civil plan i want to use a different title sheet. Instead of having a different titlesheet drawing for the civil drawing i was wondering if i could turn my titlesheet drawing into a dynamic block. In my architectural drawing i would see visibility state #1 & in my civil drawing i would see visibility state #2.
View 1 Replies
View Related
Nov 16, 2012
Experiencing some difficulty slotting the cap screw shown. The problem is this: an additional sketch is created using a rectangle .313 * .094 centered .2815 * .047 from the center of the screwhead. The sketch gets finished the extrusion is created but does not show up. The extrusion is not visible even though a new sketch was created.
View 5 Replies
View Related
Jan 25, 2012
I have designed a wooden bracing system and added the wood material properties for the part in Inventor 2012. My question is this - does Inventor have the ability to add stainless steel wood screws to the assembly to make this a 'real world' situation prior to me doing a stress analysis on it ? Something similar to the bolted connections for metal assemblys but for screws in wood is what I'm looking for.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
Apr 21, 2012
How do you create a dynamic wood screw block with lookup functinality so that you can select, say, 20mm, 25mm, 30mm screws ect. ect., and both the length and threads change acordingly? Got as far as a lookup for the length with a stretch action but cant get the threads to array acordingly!
View 2 Replies
View Related