Photoshop :: External HD Vs Larger Internal One
Aug 12, 2009
my internal driver is full on my laptop. I have to either buy a new external HD (500GB/7200rpm) or change to a larger internal one (500GB/7200 or 5400rpm). I am aware the external one will be lower compared to internal one. is it acceptable? I think that PS will use HD only when opening and saving the photos. It uses memory and scratch disk (configured on internal one) most of the time. I can not add the second internal HD. Only Photshop CS4 and MS office installed on this laption which is only used for PS. OS is window 7 64-bit with 4GB memory.
View 1 Replies
ADVERTISEMENT
Mar 19, 2014
I have just had a new 1TB internal hard drive installed in my PC and then the original smaller internal 500GB hard drive cloned onto it. The new 1TB is now Local Dick C and the smaller 500GB has been changed from C and is now Local Disk F. PSE11 is running from the new C and all my pictures are on both C and F but the catalogue is pointing to F. I want to delete all of the old files on F to free up space since they are all cloned to the new 1TB C, so I want the PSE11 catalogue to point only to the pictures on C. I have tried creating a new Catalogue and importing my pictures from C. The images come in and look connected to C but, when I close PSE11 and then reopen that new catalogue, the image path reads F, as does the original catalogue. So, now I have two catalogues apparently point to F but I want to: 1) have only one catalogue pointing to C; 2) the delete catalogues pointing to F; 3) then reformat F: so I have a clean 500GB old hard drive for future expansion.
View 6 Replies
View Related
Jan 8, 2014
my internal iMac 1TB HD is at its limits and so I bought a 3 TB external HD, but I don`t know what to do...I want to have all the data on the external HD...
View 10 Replies
View Related
Oct 19, 2012
I am running out of space on my internal hard drive on a MACBookPro and would like to move my photoes to an external disk and keep the catalog pointing to them. They are currently in nicely named folders and I would like to keep them that way. How can I do this?
View 1 Replies
View Related
Aug 10, 2013
I've been working up a window family that includes a correction for sizing the window to the structural core rather than a finish (plaster and render) which is what Revit does by default.
Â
I've managed to get the system functioning correctly at plan reveals - but for some reason, the finishes will not wrap at window head / cill level. I've set up 2 wall closure ref planes - called 'Closure External' and 'Closure Internal' and used these to control the extent of the finish wrapping.
Â
I've gone away to check the perfomance of the standard revit window families - and all of them seem to do the same thing, and fail to wrap any of the finishes at the window head despite wrapping correctly at plan reveals.
Â
In all cases above - the walls are set to wrap both internal and external at inserts.
View 3 Replies
View Related
May 27, 2013
I have lightroom 3.6 on a Mac running OS 10.6. I am in the process of moving my picture library from the internal drive to an external drive because my internal drive is very full. I plan to have the LR catalog remain on the internal drive as others have suggested LR will run faster if the catalog remains on the internal drive.Â
Â
I initiated the move process within the LR library, by selecting all photos within about 150 folders inside a master "my photos" folder on the internal hard drive displayed in the library module of LR. I then dragged them into the new "my photos" folder I created on the external drive which was displaying inside the LR library module. Â
Â
First question, this moving process is progressing so slowly, at a rate of about one picture every second. is this normal?Â
Â
Second question: When I open the external drive by clicking on the drive itself, outside LR, it seems the pictures are flowing in without any of the original subfolder structure that was present on the internal drive.Is something wrong that I don't see the subfolders on the external drive? I want to preserve this structure and of course see it show up in the LR library for the external drive.
View 4 Replies
View Related
May 29, 2012
I used a trial version of Lightroom 4 and imported about 300 photos from my internal imac hard drive to tinker with during the trial. So when I first set LR up, the catalog was connected to my internal hard drive, via the Pictures folder. Then when the trial ended, I bought the software and installed it but in the meantime had transferred all my photo libraryfrom my computer internal hard drive to an external hard drive. Now that I have the LR 4 software and am no longer using the trial, I'm ready to import all my photos to Light room. My question is how to I change my LR catalog (which currently contains the 300 photos I imported during the trial period) to link to my big photo library which is now on my external hard drive, instead of linking to my computer's internal hard drive
View 3 Replies
View Related
Nov 25, 2011
Using Autocad 2000 LT. Need to create a 2D basic drawing showing 14 TPI external and internal threads with a certain class of fit joined togeather. The basic drawing needs to be drawn in such a way that it could be easily changed to show different Threads Per Inch and or class of fit. Then, with that approach in mind, what would be the basic steps I should take in order to create the basic drawing and then easily change it to show different TPI and or class of fit. Note: I only need to show the external and internal threads, not the entire screw or object attached.
View 6 Replies
View Related
Feb 13, 2014
I have experienced the following behavior:
Â
1. Adding Effects to a path applies the effect but the effect is not visible in the Appearance panel.
2. In conjunction with this, it appears that internal stroking of the object creates a weird offset. The stroking is visually incorrect. The stroke generally offset by -1 on each axis. If the object has had a rounding effect applied to it, some of the corners become mangled.
View 1 Replies
View Related
Sep 21, 2012
I have to move all my picture files from my internal hardrive to an external hardrive. How do I ensure that Lightroom 4 will find both them and it's own Libraries?
View 1 Replies
View Related
Sep 25, 2013
I am not changing anything in my system. I am using windows 7 and will continue to. No change in elements version (10). how to move my pictures from my computer hard drive to an external hard drive (this will NOT be a back up) but the primary locaton for my pictures. I will keep elements program on my computer and when I want to work on my pictures or download more pictures from my camera I will connect to the external hard drive.Â
View 10 Replies
View Related
Jul 8, 2012
I was using Extensis Suitcase Fusion 4 trial, and it ended, but when it did now because I can't use it, somehow it must have removed or just had de-activated the photoshop internal system font.   All of my panels and menus etc except for the top windows-menus lists, but everything else is missing - blank.  I can't do anything in photoshop practically speaking. Cannot see any layer names etc... normal type-tool and fonts loaded show up, but nothing in the program itself.  So I can't even enter numerical values for anything.  Illustrator, Indesign, Flash, Muse, Bridge, Premiere, After Effects - -- all of these are working just fine.... what is the specific font I need to re-install for Photoshop to display? It is the same font that starts listing when you open the program on the splash logo where it is saying "loading fonts" etc and all that stuff, its just blank..
View 2 Replies
View Related
Jun 18, 2012
I have been trying out the new Photoshop CS6 Extended lately.It has been all well until I stumbled on the 3D stuff. I have been trying to replicate a same design that I can do in CS5 Extended which is - "Making a selection on a 3D shape and deform the specific area".It is well documented here for CS5 Extended. "Understanding internal constraints". URL....
Â
But now in CS6, I can't find any options to drag the constraint, or the side, strength and angle parameters you get in CS5.
View 2 Replies
View Related
Mar 7, 2008
Anyone out there getting an Internal Error 2739 on setup when trying to install CS3?
View 4 Replies
View Related
Sep 15, 2013
PS CC update ended with Update Failed. Now cannot start PS CC. POPup says could not complete your request the internal signature is incorrect. Â
View 3 Replies
View Related
Aug 18, 2012
I just installed Photoshop CS6 on my wife's PC running Windows 7 Professional with all the updates.
Â
In PS preferences I selected her internal D: drive (a non-boot drive), for her scratch disk. Now when I try to start PS it says I need to unlock her scratch file. What that file is called. I DO have adminstrator priviledges I cannot start PS so I can reset mer scratch drive preferences.
View 2 Replies
View Related
Sep 30, 2013
I ran the update function on Friday, and I think the download might have gotten corrupted. Today, Monday, when I try to start the program I get only a little window with this notice:
Â
Could not complete your request the internal file signature is incorrect.
Â
The dubious grammar doesn't bother me so much as the fact that the Creative Cloud window tells me that I'm up to date. I don't know how to get a new download to replace the bad one I probably have.Oddly, the 32 bit version of CC works fine. 5.1 still works, too.
View 3 Replies
View Related
Jun 27, 2013
I recently upgraded to an SSD on my MBP, I bought a caddy and swapped out the optical drive for the original HDD internally. Now, I was hoping to move the scratch disk from the SSD to the original HDD, but the HDD doesn't even show up as an option in the Photoshop preferences. The drive is easily accessible anywhere else, and even accessible through the open/save/etc. menus within Photoshop, so OS X and Photoshop both know the drive is there, but Photoshop just isn't showing it as an option within the Scratch Disk options setting.
View 16 Replies
View Related
Oct 29, 2013
I tried to launch Photoshop cc, but this time instead of lauching, it stated this "could not complete your request the internal file signature is incorrect". I have used this program many times and now it has stopped working.
View 1 Replies
View Related
Nov 17, 2012
I have tried numerous times to be able to upload directly from PSE 10 to Facebook, but continue to get an error after I sign in to Facebook that says HTTP 500 Internal Server Error.Â
Windows XP SP 3
Pentium CPU 80 GHz
2 GB RAM
View 1 Replies
View Related
Feb 26, 2013
I have created the following code in VB.NET that i allows you to calculate the internal angle of a polyline. First delivery getting the angle of deflection, a ves obtained 180 you rest this and get the inner corner. All fine, as long as the polyline is the image-1.png. Otherwise, if the polyline is as in the image-2.png there is an error in the vertex B.
That algorithm could follow in order to comply with the correct value. Since later this data i presented it in a table of AutoCAD.
Â
Public Shared Function AngleDeflection(ByVal pto3d As Point3dCollection) As ArrayList Dim anguloM As Double = 0 Dim vangl As ArrayList = New ArrayList For i As Integer = 0 To pto3d.Count - 2 Dim V As Integer = pto3d.Count - 2 If i = 0 Then anguloM = Math.Atan2(pto3d.Item(i).Y - pto3d.Item(V).Y, pto3d.Item(i).X - pto3d.Item(V).X) - Math.Atan2(pto3d.Item(i + 1).Y - pto3d.Item(i).Y, pto3d.Item(i + 1).X - pto3d.Item(i).X) vangl.Add(anguloM) Else anguloM = Math.Atan2(pto3d.Item((i - 1) + 1).Y - pto3d.Item(i - 1).Y, pto3d.Item((i - 1) + 1).X - pto3d.Item(i - 1).X) - Math.Atan2(pto3d.Item((i - 1) + 2).Y - pto3d.Item((i - 1) + 1).Y, pto3d.Item((i - 1) + 2).X - pto3d.Item((i - 1) + 1).X) vangl.Add(anguloM) End If Next Return vangl End Function
View 2 Replies
View Related
Oct 30, 2013
I drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.Â
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
View 1 Replies
View Related
Nov 21, 2013
How can I create an internal shadow with Illustrator on my shapes like we can do on Photoshop ? I see only a way to to external shadow. I would like to obtain something like this: [URL]
View 9 Replies
View Related
Jul 16, 2013
I just tried to open LR4. It opened, but then a screen with "An internal error has occurred" and a long string of words and symbols is in the middle and LR is frozen. I did a force quit and reopened to the some thing.Â
View 4 Replies
View Related
May 27, 2009
In PS CS4 I have a Photoshop file that is 46 MB. I saved this same file as a PDF, but the PDF is 86 MB. Isn't the point of a PDF to be more compact? I have set the settings as Press Quality with the default settings when converting to the PDF. I did not flatten any layers, but I don't want them flattened because there is text on the page.
View 7 Replies
View Related
May 15, 2008
I can change the default cusor in XP Pro but it doesn't carry over to PS. The preferences/display&cursors tab is limited.
What I need is a heavier cursor or full cross hairs. I'm running 1920 x 1200 on a 22 inch Sony LCD screen. With aging eyes it's too difficult to pick up the tiny cross cursor on various photo backgrounds.
View 6 Replies
View Related
Aug 1, 2008
I started a new project. I set the file criteria for 4" wide 5" high, 300 resolution, CMYK.
When I save the file as a JPEG and export it for print the image is huge. I don't know what I'm doing wrong.
I check the settings again, after noticing they are huge, and the settings show it's still 4" wide 5" high, with 1200 pixels wide, 1500 pixels high.
What am I doing wrong? How can I avoid it on future projects, and how can I fix this project?
View 11 Replies
View Related
Apr 24, 2013
I would like to know if there is any possibility to replace a component with another one, that has a different internal name. Losing the dependencies would be acceptable.
ReplaceReference and PutLogicalFileNameUsingFull always return the error "wrong parameter".
View 5 Replies
View Related
Mar 24, 2013
how we can design a set of internal gears?
View 1 Replies
View Related
Feb 6, 2013
I have completed the structural form of my project including all slabs, columns and external walls. I have developed floor plans in AutoCAD so I have imported the plans into my plan views in lines and then drawn the internal walls on top of this. The internal walls I am using are basic cavity walls and show up in the plan view of the level I am working on. The base and top constraints have also been set appropriately. However, when I move to 3D view and hide an external view I can not see my internal walls.
View 2 Replies
View Related
Apr 19, 2012
I am trying to mirror a block which has text defined internally. However, the text will not reverse when the block is mirrored. I have read some documentation which said to use MIRRTEXT with a setting of "1".
I tried this and it didn't work, are there any other options which allows the block to stay intact and not have to explode it?
View 3 Replies
View Related
