I have been trying out the new Photoshop CS6 Extended lately.It has been all well until I stumbled on the 3D stuff. I have been trying to replicate a same design that I can do in CS5 Extended which is - "Making a selection on a 3D shape and deform the specific area".It is well documented here for CS5 Extended. "Understanding internal constraints". URL....
But now in CS6, I can't find any options to drag the constraint, or the side, strength and angle parameters you get in CS5.
I need to drive more than one constraint at a time. The assembly consist of a hydraulic ram that pulls a cable which is routed around a few pullys and then pulls another linear moving member. I don't really care about modeling the cable right now, I just want the cylinder piston and the final member to move in unison. I can only drive one constraint at a time, so I figured I could relate the two constraints together by setting them equal to a parameter (variable), but that isn't working. Is it me or is driving multiple constraints at a time something that would be very useful for a lot of applications?
I'm modeling cables running through a series of cable clamps. I'm working in an assembly with my structure as one part, clamps as seperate parts, and cables as separate parts. I modeled the clamps first and am using them to create my 3d spline to run the sweep. The clamps have moved several times and each time, the sweeps (cables) do not update to follow the new clamping path. I have tried multiple ways of solving this.
I've tried to redo the splines using "Include Geometry" and running the spline through the centers of the clamps. I've also deleted the constraints (which for some reason turn into fixed) and reapplied them as coincident constraints. However, once I setup these coincidences, they always change back to fixed.
In a last ditch method, I've created 2d sketches at EVERY clamping location (yes that's alot of sketches, time and effort) and projected the circular geometry to get a center point. This has seemed to work, but is so much work, there's no way we could use it regularly.
The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
I was using Extensis Suitcase Fusion 4 trial, and it ended, but when it did now because I can't use it, somehow it must have removed or just had de-activated the photoshop internal system font. All of my panels and menus etc except for the top windows-menus lists, but everything else is missing - blank. I can't do anything in photoshop practically speaking. Cannot see any layer names etc... normal type-tool and fonts loaded show up, but nothing in the program itself. So I can't even enter numerical values for anything. Illustrator, Indesign, Flash, Muse, Bridge, Premiere, After Effects - -- all of these are working just fine.... what is the specific font I need to re-install for Photoshop to display? It is the same font that starts listing when you open the program on the splash logo where it is saying "loading fonts" etc and all that stuff, its just blank..
my internal driver is full on my laptop. I have to either buy a new external HD (500GB/7200rpm) or change to a larger internal one (500GB/7200 or 5400rpm). I am aware the external one will be lower compared to internal one.is it acceptable?I think that PS will use HD only when opening and saving the photos. It uses memory and scratch disk (configured on internal one) most of the time.I can not add the second internal HD. Only Photshop CS4 and MS office installed on this laption which is only used for PS. OS is window 7 64-bit with 4GB memory.
I just installed Photoshop CS6 on my wife's PC running Windows 7 Professional with all the updates.
In PS preferences I selected her internal D: drive (a non-boot drive), for her scratch disk. Now when I try to start PS it says I need to unlock her scratch file. What that file is called. I DO have adminstrator priviledges I cannot start PS so I can reset mer scratch drive preferences.
I ran the update function on Friday, and I think the download might have gotten corrupted. Today, Monday, when I try to start the program I get only a little window with this notice:
Could not complete your request the internal file signature is incorrect.
The dubious grammar doesn't bother me so much as the fact that the Creative Cloud window tells me that I'm up to date. I don't know how to get a new download to replace the bad one I probably have.Oddly, the 32 bit version of CC works fine. 5.1 still works, too.
I recently upgraded to an SSD on my MBP, I bought a caddy and swapped out the optical drive for the original HDD internally. Now, I was hoping to move the scratch disk from the SSD to the original HDD, but the HDD doesn't even show up as an option in the Photoshop preferences. The drive is easily accessible anywhere else, and even accessible through the open/save/etc. menus within Photoshop, so OS X and Photoshop both know the drive is there, but Photoshop just isn't showing it as an option within the Scratch Disk options setting.
I tried to launch Photoshop cc, but this time instead of lauching, it stated this "could not complete your request the internal file signature is incorrect". I have used this program many times and now it has stopped working.
I have tried numerous times to be able to upload directly from PSE 10 to Facebook, but continue to get an error after I sign in to Facebook that says HTTP 500 Internal Server Error.
I am running out of space on my internal hard drive on a MACBookPro and would like to move my photoes to an external disk and keep the catalog pointing to them. They are currently in nicely named folders and I would like to keep them that way. How can I do this?
I have just had a new 1TB internal hard drive installed in my PC and then the original smaller internal 500GB hard drive cloned onto it. The new 1TB is now Local Dick C and the smaller 500GB has been changed from C and is now Local Disk F. PSE11 is running from the new C and all my pictures are on both C and F but the catalogue is pointing to F. I want to delete all of the old files on F to free up space since they are all cloned to the new 1TB C, so I want the PSE11 catalogue to point only to the pictures on C. I have tried creating a new Catalogue and importing my pictures from C. The images come in and look connected to C but, when I close PSE11 and then reopen that new catalogue, the image path reads F, as does the original catalogue. So, now I have two catalogues apparently point to F but I want to: 1) have only one catalogue pointing to C; 2) the delete catalogues pointing to F; 3) then reformat F: so I have a clean 500GB old hard drive for future expansion.
I have created the following code in VB.NET that i allows you to calculate the internal angle of a polyline. First delivery getting the angle of deflection, a ves obtained 180 you rest this and get the inner corner. All fine, as long as the polyline is the image-1.png. Otherwise, if the polyline is as in the image-2.png there is an error in the vertex B.
That algorithm could follow in order to comply with the correct value. Since later this data i presented it in a table of AutoCAD.
Public Shared Function AngleDeflection(ByVal pto3d As Point3dCollection) As ArrayList Dim anguloM As Double = 0 Dim vangl As ArrayList = New ArrayList For i As Integer = 0 To pto3d.Count - 2 Dim V As Integer = pto3d.Count - 2 If i = 0 Then anguloM = Math.Atan2(pto3d.Item(i).Y - pto3d.Item(V).Y, pto3d.Item(i).X - pto3d.Item(V).X) - Math.Atan2(pto3d.Item(i + 1).Y - pto3d.Item(i).Y, pto3d.Item(i + 1).X - pto3d.Item(i).X) vangl.Add(anguloM) Else anguloM = Math.Atan2(pto3d.Item((i - 1) + 1).Y - pto3d.Item(i - 1).Y, pto3d.Item((i - 1) + 1).X - pto3d.Item(i - 1).X) - Math.Atan2(pto3d.Item((i - 1) + 2).Y - pto3d.Item((i - 1) + 1).Y, pto3d.Item((i - 1) + 2).X - pto3d.Item((i - 1) + 1).X) vangl.Add(anguloM) End If Next Return vangl End Function
I drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
How can I create an internal shadow with Illustrator on my shapes like we can do on Photoshop ? I see only a way to to external shadow. I would like to obtain something like this: [URL]
I just tried to open LR4. It opened, but then a screen with "An internal error has occurred" and a long string of words and symbols is in the middle and LR is frozen. I did a force quit and reopened to the some thing.
I would like to know if there is any possibility to replace a component with another one, that has a different internal name. Losing the dependencies would be acceptable.
ReplaceReference and PutLogicalFileNameUsingFull always return the error "wrong parameter".
I have completed the structural form of my project including all slabs, columns and external walls. I have developed floor plans in AutoCAD so I have imported the plans into my plan views in lines and then drawn the internal walls on top of this. The internal walls I am using are basic cavity walls and show up in the plan view of the level I am working on. The base and top constraints have also been set appropriately. However, when I move to 3D view and hide an external view I can not see my internal walls.
I am trying to mirror a block which has text defined internally. However, the text will not reverse when the block is mirrored. I have read some documentation which said to use MIRRTEXT with a setting of "1".
I tried this and it didn't work, are there any other options which allows the block to stay intact and not have to explode it?
I'm trying to synchronize "Noise reduction" settings on a set of 952 photos (which are actually smart previews), using LR 5.2, and after I click apply I get the following error:
An internal error has occurred: <AgErrorID>10003</AgErrorID>
I have tried with only 3 photos selected and it worked fine. But it seems LR is not properly handling the large number of photos.
I think this should be straightforward but want to make sure. I use Windows 7 on a Dell Desktop with a 1.5 TB HD. It's 30 Gigs from full which is one more shoot. I have backups on external drives but would like to have all my photos both internal and external for safety sake. I'm currently using lightroom 4.4.
When I install my second 2 TB HD I think all I would have to do is move My Pictures folder (with the lightroom catalog) to the new drive. What will I have to do within the software to let the Program know where it is?
In Library module/Folders right click and show parent folder I get the following error
An Internal error has occured: Database .. columns rootFolder, pathFromRoot are not unique Statement: UPDATE AgLibraryFolder SET rootFolder = ? WHERE id_local = ?;
This error occurs on all folders that I have checked.
I have tried to open lightroom and perform an integrity check which did not report any errors.
Yes, I do backup the catalogue but when this problem developed...
I’m using Lightroom 4.x on Mac Pro, 10.6.8 OS. MY 1TB internal drive is full so I want to copy all my images to a new 4TB internal drive. I also want to make a back up copy to an external hard drive but not necessarily at the same time.
What is the best way to do this so that Lightroom will have no problem linking to my photos? I’m thinking that making a clone copy via SuperDuper or CCC??
After making the copies to the new larger “originals” hard drive and back up drive, how do I get Lightroom to recognize and to open up the new "originals" drive and link to all my photos?
my internal iMac 1TB HD is at its limits and so I bought a 3 TB external HD, but I don`t know what to do...I want to have all the data on the external HD...
I bought Adobe CC 5 days ago and everything worked fine. When i continued to work on a project i started 3 days ago AE suddenly crashed and I got this error:
After Effects Error: internal verification failure! {Plugin ID is invalid}
I don't know why this happened but now i can't open any projects any more and if i start a new one and create a new comp i get the same message and after effects crashes again. In my last project I was mainly using the keylight and liquify plugin and a bunch of masks...
System Specs:
Win 7 Ultimate 64bit 16gb ram cpu: q9550 @3.99ghz gpu: gtx770 60gb ssd with os and ae + 4tb hdd (1tb+1tb+2tb)
We don't have a functional work around for this yet. We're using C3D 2014 (IDSP). We can get this error importing styles into some existing CAD files, but not all. We can create a brand new, blank drawing and attempting to import these styles will cause the error. The error occurs during the 'verifying imported styles' progress bar in the lower left.
We thought we were getting somewhere when we exported to dwg 2013 format and opened that and we could then import styles with no issue. Unfortunately, in exporting to dwg 2013 format, we lose all of our surface and point data. Doing a saveas to 2013 apparently does nothing more than just save the drawing and that will still not allow importing of styles.
how to get our style templates to successfully import into all of our CAD files.
