AutoCad 3D :: Get Two Circles Joined By Two Lines?
Apr 27, 2011Like when I draw a cylinder, instead of a solid cylinder I get two circles joined by two lines. How do I change this so that I get the solid?
View 3 Replies
ADVERTISEMENT
AutoCad :: How Normal Lines Joined Together To Make One Polyline
Jun 18, 2012How are normal lines joined together to make one poly line? Learning on Auto CAD 2010.
View 4 Replies View RelatedAutoCad :: Connecting Lines And Circles
Mar 21, 2011Im having a little issue with connecting lines and circles but not sure how to shorten the question to do a search on here. I have 2 concentric circles (the two circles form the walls of a round tower wall) which have 2 lines (representing a wall) passing through them. I want to join the circles from the circumference to the lines, but each time I try to do it the line seems to default to the center of the circles and to the endpoints of the lines which is not what I want. The eventual aim will be to remove a section of the circles and the lines where the new line connects to them to form an opening in the walls.
Ive tried <shift>right click and selecting tangent on the circles but I cant figure out what to do on the lines and it constantly defaults to the end of the line not to where I want to intersect the lines.
AutoCAD LT :: Unable To Draw Circles And Lines
Oct 19, 2011I am not able to draws circles and lines etc. using the ribbon or the command line. i am using the correct procedures per the tutorials and I have Google search how to add circles. I click the circle on the ribbon, choose my center point and drag to choose the radius, left click and no circle, same procedure for a simple line.
Is there something that needs to be activated for these to work? I have an activation code which I do not remember using when I installed the software, I only remember using the serial number and product key.
AutoCAD 2013 :: Trimming Lines With Circles Or Ellipses?
Sep 11, 2013I drawning 2 circle as radius 250mm.the distance between two circle is 0.08mm I drawing one line segment between two circle and I Expanding line segment as length 20mm.then I offset this line The amount 2.5 mm in vertical side up.
When I trim these horizontal line that are Cross-Being with two circle the Remaining line segment is shorter than real distance between two arcs I thinks its happening?
Also I attached 7 pics I try show my problem.
Also when I want obtain horizontal distance with distance command or by linear the intersection is not start from circumference.
whats this and how I can get real horizontal distance between two arcs
AutoCAD 2010 :: Trimming Circles Against Tangent Lines?
Sep 30, 2013I am working with a drawing provided to me by someone else, and where there should be arcs they have multiple line segments. I need a radius for what I'm doing, so I drew a circle with TTR and then tried to trim against the tangent lines to get my arc. However, sometimes this works and sometimes it doesn't. why this doesn't always work?
View 5 Replies View RelatedAutoCAD 2010 :: Changing 0.050 Dia Circles To Two Lines (x On The Center Point)
Feb 19, 2013change all circles of a certain diameter in a .dxf file to points. I received the following lisp file. For the last 10-12 years it has worked great. We create many custom sized parts that could be cut on a plasma (utilizing the circles for holes) or punched, assigning a crosshair tool to the point. Now we are switching to a laser, and want to etch a crosshair at this same location. Our solution has been to draw the crosshair and copy to each required location. Sometimes this may be 20 to 30 locations. Now I would like to know if there is a way to replace all of these circles with a crosshair. This could be a similar lisp file, or an easier manual operation. I know that I can select all of the circles using the filter command and specifying the radius. But I don't know how to assign the 'crosshair' to these locations. (defun c:ctopt ( / ename cnt ss) (setq ss (ssget "x" '((0 . "CIRCLE")))) (if ss (progn (setq cnt 0) (repeat (sslength ss) (setq ename (ssname ss cnt)) (if (equal (cdr (assoc 40 (entget ename))) 0.025 0.005) ;use this line for a radius 0.025 +/- 0.00015 ;(<= (cdr (assoc 40 (entget ename))) 0.05) ;use this line for a radius of 0.05 or less (progn (entmake (list '(0 . "POINT") (assoc 10 (entget ename))(assoc 8 (entget ename)))) (entdel ename) )) (setq cnt (1+ cnt)) ) ) ) (princ) )
View 3 Replies View RelatedAutoCAD Inventor :: Make Part Of Different Tubes By Sweeping Circles Along Lines?
Oct 29, 2013I'm trying to make a part of different tubes by sweeping circles along lines. However one side of the part joins correctly, but other not. I'ill add photos of correct smooth join and uncorrencly unsmooth.
View 3 Replies View RelatedAutoCad :: PDF Missing Border Lines Around Circles And Ellipses As Well As Some Bleeding Of Colors
Mar 3, 2012I have put several drawings into the Publish> DWG>>> PDF mode.
The PDF comes out missing little bits of border lines around circles and elipses as well as some bleeding of colors.
Photoshop :: Creating Computer Generated Lines + Circles
Nov 15, 2005I am trying to create a circle with a pre-defined diamter of 7mm, and then I want to add 20 (twenty) generated lines intersecting another 20 lines across the circle.
TO make it more difficult, I need to pre-define the width of the lines, as well as the spacing of the lines.
Photoshop :: Smoothing Lines- And Making Concentric Circles
Mar 24, 2004How do you smooth lines? Like if I trace something and the lines are just a touch jagged, how do I get them to look perfect? I'm using PS7.
Also, how could I make concentric circles? Or even just a hollow circle? I can use the shape tool to make a circle, but that fills it - is there a way to make it with just a 2 or 3 pixel outline and hollow in the middle?
Xara :: Circles And Rounded Rectangles Have Jagged Lines
Jan 20, 2012When I drag out a circle, or use the node to curve the corners of a rectangle, the line isn't smooth. It looks like it's slightly jagged.
I'm trying to create a drawing which features the rounded edge of a playing card, with no luck. It simply doesn't look good.
CorelDRAW Graphics Suite X4 :: Creating Dotted Lines That Are Circles
Mar 16, 2009I'm trying to create dotted lines that are actually circles and not square shaped dots (the given option in the outline menu). Is the best/only way to do this by creating a new Artistic Media Brush? It seems like there should be an easier option when needing to create a long dotted line or a shape with a dotted outline.
View 14 Replies View RelatedAutoCad :: Extrude Some Joined Polylines / Arcs?
May 29, 2012I am trying to extrude some joined polylines, arcs etc. The problem is some of them are extruding as a solid, which is what I want and some are extruding as a surface of the profile.
View 8 Replies View RelatedAutoCad :: Drawing Joined External And Internal Machine Screw Threads
Nov 25, 2011Using Autocad 2000 LT. Need to create a 2D basic drawing showing 14 TPI external and internal threads with a certain class of fit joined togeather. The basic drawing needs to be drawn in such a way that it could be easily changed to show different Threads Per Inch and or class of fit. Then, with that approach in mind, what would be the basic steps I should take in order to create the basic drawing and then easily change it to show different TPI and or class of fit. Note: I only need to show the external and internal threads, not the entire screw or object attached.
View 6 Replies View RelatedAutoCAD Map 3D :: Shapefile Joined To ODBC Connected Table - Filter Not Working
Dec 11, 2013I have a Shapefile layer added to the map via FDO. I joined it to a SQL Server based table via ODBC. I can see all the data (shapefile & ODBC table) correctly in the attribute table, but when comes time to "Query to Filter Data...", only fields in the Shapefile are available and displayed in the Filter dialogue. I want to be able to Filter using fields in the joined. If I export that same Shapefile to an SDF and THEN try the same join and filter, all the fields from the SDF as well as the joined ODBC table are available in the filter dialogue.
View 8 Replies View RelatedGIMP :: Import Photo Trace Geometric Shapes Over Photo Like Circles And Lines
Oct 5, 2011I am new to GIMP.
I want to import a photo, trace geometric shapes over the photo like circles and lines, and then remove the photo. I have a very basic understanding of LAYERS. I have viewed a few tutorials. But I don't know how to import a photo or how to get rid of it once I have drawn the geometric shapes over it.
Photoshop :: Circles Inside Circles (or Rings)
Feb 11, 2005I'm trying to make a logo. Circular logo with an inner ring maybe 4 px wide and 15 px inside the rim of the outer circle.
Basically I want a blue circle with a yellow inside ring. What's the best way of doing this? The only thing i can think of is: creating a blue circle marquee, and then another (trying to estimate a new circle size and change the color) that is yellow, and then making another smaller blue circle inside the new one. That's just ugly.
I tried the edit/stroke but that just gave me a stroke around the outer circle; it didn't put a ring inside the circle 15 px down.
Also I tried to contract the original circle by selecting it, then Modify/contract. That's got me a selected ring, inside the circle. Now how in the world do I make that little ring yellow? It just remains selected and I can't seem to find a way to color it.
Photoshop :: Creating Dotted Lines/dotted Circles
Sep 15, 2004is PS 7 able to do dotted lines and circles? If I create a selection (circle or rectangle) can it render dotted lines?
View 2 Replies View RelatedRevit :: Moving Introduce - Can't Keep Elements Joined
Oct 6, 2012Moving introduce “Can't keep elements joined”,
I tried to move my drawing to make it at the center of the elevation tags but I have a message saying “can't keep elements joined”
What is the effect of accepting or rejecting this message?
Also, I’m wondering if there is a command that place the drawing at the center of the elevation tags.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
Illustrator :: Selects Objects Cannot Be Joined Since They Are Invalid?
Aug 12, 2012Basically, I want to join the below three shapes into one shape, but when I'm lining up the anchor points and joining, it's saying:
"The selects objects cannot be joined since they are invalid objects".
Revit :: Error / Part Of Roof To Be Joined Misses Target Face
May 10, 2005Everytime I try to join a room I get this error "Part of the roof to be joined misses the target face"
View 5 Replies View RelatedIllustrator :: Get Miter-joined Vertices On Unfilled Right Triangle With 3 Different-colored Sides?
Mar 6, 2013I want to create a right-angled triangle (just the three sides, no fill) where each side is a different color (say red, blue, and green). For generality, let's assume it's a scalene (rather than isosceles) right triangle. I want the weight of each line to be about 3pt. (But I guess that's not a crucial number. Let's say I'd like the sides to be 20 or 30 pts thick, for the thrill of it.) I know how to draw the three lines of specified width, make them different colors, and arrange them into a triangle. My problem is how to make the vertices (corners) look miter-joined rather than have them overlapping each other, which obviously looks terrible and like something an infant drew in Microsoft Paint. ;-) If I join the 3 paths into a single shape, they all become the same color, so I'm thinking I have to keep it as 3 separate lines (paths). The only solution I can think of is: Instead of drawing three lines of 3pt weight, draw three extremely thin rectangle shapes (about 3pt wide), one of each color, and rotate/position them so that they form the sides of a right-angled triangle. Then go in and do some visual surgery at the vertices to make the vertices look miter-joined.
View 6 Replies View RelatedAutoCad 3D :: 2D Circle Jagged Lines - 3D Model Hidden Jagged Lines / How To Get Smooth Lines
Oct 5, 2012Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
Photoshop :: Make Straight Lines? Horizontal Lines? Vertical Lines? Curves?
Aug 17, 2003how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedAutoCAD 2010 :: Random Red Circles
Jan 7, 2010I appear to have two red circle which I did not create on drawing in model space. I am assuming it is some sort of error but can not figure it out. On my layout tab viewports containing the section does not show, only the red circle.
View 6 Replies View RelatedAutoCAD 2010 :: Over Kill For Circles
Oct 11, 2012I have a drawing that has a heap of circle that have two on top of each other. Overkill works for lines and arcs, but I can't seem to get it to work for circles. Is there another way to get rid of one of the circles? We will be using the file in CAM software so two on top of each other is a pain.
View 4 Replies View RelatedAutoCAD 2013 :: Red Circles When Hatching?
Mar 15, 2013When a co-worker is trying to hatch using pick point, multiple red circles start appearing and choke up the program. He is not even picking inside the area where these gap indication circles are appearing. I have had him adjust the hatch gap tolerance but am wondering if I can turn off this behavior entirely?
View 4 Replies View RelatedAutoCad :: Unable To Get Rid Of Two Circles On Drawing
May 26, 2012Two circles have appeared on my drawing, I cant select them to get rid of them, they scale differently to the rest of the drawing when I zoom, i.e. I zoom out and the get large, I zoom right in and they are small. Where did they come from and more importantly how can I get rid of them?
View 2 Replies View RelatedAutoCad 2D :: Solid Hatch Circles
Sep 21, 2011when I create a shape and fill it in for a colour ( so I can send it to a screen printer to be put on our product ), I get an issue with DN-P-2726.dwg. I was trying to recreate the part being painted red, so the screen printer overlays with the black and grey.
View 7 Replies View RelatedAutoCad :: Center Mark For Several Circles At Once
Jun 1, 2009Is it possible to put a center mark on multiple circles instead of one at a time?
View 9 Replies View Related