AutoCAD .NET :: How To Ddd External References In The Drawing / C#
Jun 19, 2013
I want to load the external references in the drawing, how to implement this program?
I returned to the drawing path and the way I want to load it using the insertion point.The code error is probably somewhere not understand where.
[CommandMethod("TDMSXREF", CommandFlags.Session)]
publicvoid TDMSXREF()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
[code].....
View 1 Replies
ADVERTISEMENT
Jan 31, 2012
I've been asked to create several drawings using one external reference which contains doors, bund walls, lighting etc. My question is how do I take this external reference and create several new drawings when I cant even turn layers on or off once I have inserted it onto my new page?
View 4 Replies
View Related
Jul 21, 2011
I needed to use an xref so loaded up the external references box to view all available xrefs. Since i did this i cant get rid of the xref box. Its there whenever i load cad up, load a new drawing and when switching clean screen on and off. Ive tried the close button in the top corner but it still returns.
View 8 Replies
View Related
Jul 23, 2012
How to use External references?? i have worked in autocad but i dont know how to use this command, i have to do about 250 drawings of External references.
View 3 Replies
View Related
May 2, 2011
Is there a procedure or command to use on an opened drawing to see if the drawing is used as an external reference anywhere else? For example, can I open Drawing A and determine whether it is used as an external reference in Drawing B without going to Drawing B and looking at the external references palette?
View 1 Replies
View Related
Nov 1, 2013
I have a DWG file with wipeouts. When I use the files as external references in another DWG and print to PDF the wipeouts do not work and all that is seen is the wipeout line. Is there a way to have the PDF have the wipeouts appear as they should?
View 3 Replies
View Related
May 4, 2012
I use this palette all the time and keep the icon displayed (in hidden form) on every session that I open. I started AutoCad this morning and "external reference" icon was not displayed on the screen. I went to the tools tab and selected the external reference palette. A box was displayed that could not be hidden and all screen function were stopped until I closed this box.
I went to customize tool palettes and compared it to the properties palette and they looked the same. I want to get my external reference palette function back to the way it was.
View 1 Replies
View Related
Feb 28, 2013
I am trying to add a list of External References to MTEXT. The diesel expression $(xrefs) works fine within RTEXT but when I enter it into MTEXT the result shows "$(XREFS)??
View 2 Replies
View Related
Jun 27, 2013
I'm trying to adjust the properties of some block objects in Mspace. When the file contains external references the function fails, when it has none it works perfectly.
Dim modelSpace As BlockTableRecord = DirectCast(M_trans.GetObject(SymbolUtilityServices.GetBlockModelSpaceId(db), OpenMode.ForRead), BlockTableRecord)
For Each id As ObjectId In modelSpace
Dim ent As Autodesk.AutoCAD.DatabaseServices.Entity = DirectCast(M_trans.GetObject(id, OpenMode.ForWrite), Autodesk.AutoCAD.DatabaseServices.Entity)
ent.Color = Color.FromColorIndex(ColorMethod.ByLayer, 256)
Using the above to get all objectid's and filter through them then using:
If TypeOf ent Is BlockReference Then
Dim br As BlockReference = DirectCast(ent, BlockReference)
Dim btr As BlockTableRecord = DirectCast(M_trans.GetObject(br.BlockTableRecord, OpenMode.ForRead), BlockTableRecord)
If Not btr.IsFromExternalReference Then
View 6 Replies
View Related
Aug 20, 2013
Here is the background.
A "MODEL" drawing exists that contains only the surface model. The surface model is data referenced into a "LABEL" drawing that contains the surface style (contours), contour labels, and spot elevations. This "LABEL" drawing is xref-ed into a "SHEET" drawing that contains the title block and some other xrefs containing the proposed layout, ex cond, etc..
When I open the "LABELS" drawing, the data reference works. My problem is that when I open the "SHEET" drawing, the contour labels and spot elevations cannot find the referenced surface and just contain a string of 20 or so characters.
I already have a workaround. If I open the "SHEET" drawing, then open the "LABELS" drawing and save it, I can reload the "LABELS" drawing within the "SHEET" drawing and the problem is solved.
HOWEVER, I have a bunch of sheets that I want to publish, and publish does not work when you have to open the file and re-reference everything. Is there anyway to get this reference working correctly so that I do not have to open multiple drawings to get my data correct?
FYI, I have already tried resetting my data shortcuts project folder, validating data shortcuts, etc. in the "LABELS" and "SHEET" drawings.
Civil 3D 2012, SP 2.1
View 2 Replies
View Related
Sep 20, 2011
is it possible to retrieve the names of all the nested external references, and how should it be done?
View 2 Replies
View Related
Nov 13, 2012
Is there a way to localize all external material references? For instants I created a framing square with the proper materials assigned. When merged with another file it looses its bit map image placement so have to re-fit every thing again.
View 8 Replies
View Related
Dec 20, 2012
Is there any way at all to explode all block references in a drawing so that basically all block references no longer exist and they're just sat in their relevant layers.
In short... exploded :p
But I mean one way to get ALL of them.
View 4 Replies
View Related
Sep 20, 2012
So I made a shop drawing of an assembly, which is very complex and took a great deal of time to complete. It has 3 sheets and a bunch of different views and information already on the drawing.
Now the thing is I took the assembly and made it an iassembly; but I did this in another file so I wouldnt screw up all the work I did before. Now I realize that I dont have the links to the shop drawing that I wish I did.
how to link the shop drawing to the new iassembly model?
View 1 Replies
View Related
Jan 8, 2013
not sure if it a stamp plot item but I am trying to list all the x-references that are associated with a particular drawing on the plot sheet?
View 5 Replies
View Related
Aug 28, 2013
I am working on roadway project where I am using Pipe Networks to layout the drainage infrastructure. I have set my working dwg up so that I am data referencing the existing surface and proposed alignment. I have set my pipe network up so that it is also referencing this surface and alignment. Everything was working fine. Labels were pulling the correct information from my surface elevations, and stations were being referenced as well, until I got a message that recommended that I recover my drawing.
I ran recover and my surface and alignment data shortcut disappeared. My pipe network now shows questions marks where there were once stationing and it appears that the surface and alignment have completely disassociated themselves from my drawing, however they appear in the prospector, but cannot be refreshed. Again the data shortcut symbol is no longer next to my surface and alignment, but there is a symbol telling me that those objects are being referenced by another object in my drawing (my pipe network). I have tried refreshing, resetting the working folder, all to no avail.
View 1 Replies
View Related
Nov 25, 2013
We have generic drawings of assemblies we use in layout drawings as standard details. We insert them as blocks with one or two dimensions that vary (geometry remains the same-these are just representative for information).
We could define these as attribute values so that a user types a length that displays in the drawing but if we wish this to be part of a dimension we would have to explode the dimension to manually replace the mtext dim value with an attribute tag.
This seems unsubtle so I edited the dim value to be a field referencing the attribute value and made the tag invisible. This worked in the drawing-the attached shows the attribute tag ALL THREAD and the resultant dimension text (as a field value) replaced with the default value LENGTH.
When the drawing is inserted as a block it duly prompts for a value for ALLTHREAD and any value can be typed-`1200, 3500, 1672 etc. but the dimension does not update from the default value LENGTH, even after using attsync, regenall. So, if the drawing recognizes the attribute then how come it cant recognize the graphic via a field reference and update it? Is it buried too deep in the database hierarchy for LT to make sense of it maybe?
I dont want to explode the dim but it looks like I may have too if this cannot be made to work.
View 2 Replies
View Related
Feb 23, 2012
How to avoid nested references reload every time I open autocad drawing. In some drawings I have twenty nested references. I really need to avoid reload each reference.
View 1 Replies
View Related
Dec 14, 2011
Is there a way to use iLogic to replicate the old-school method of replacing drawing references? (ie, where you'd temporarily rename the originally referenced file, open the drawing, and then point it to the new file after Inventor says it can't find the original)
Longer version:
I have an iLogic configurator that manipulates skeletal models, copies them out as new files, and swaps them into template drawings. The original skeletal model can be configured in several different ways (different features, surfaces, etc), so I have several template drawings set up for each model depending on the configuration.
The problem that I'm encountering involves the order in which the drawing is loaded and then has its references replaced. When first opened, the drawing loads the original skeletal model which doesn't have all the geometry of the "new" model for which the particular template drawing was intended. This makes most of my section and detail view constraints go belly-up. After subsequently replacing the model references with the "new" model with the correct geometry, the section and detail view constraints fail to resolve themselves, and my once-perfect detail drawing is ruined.
If I instead force the drawing to open with the new model from the git-go (via the workaround discussed above), everything loads perfectly. However, I haven't yet found a way to handle this automatically with iLogic.
FWIW, I am currently using the following code in a subroutine:
DESTINATIONDOC=ThisApplication.DOCUMENTS.Open(TemplateDrawing, False)
DESTINATIONDOC.SAVEAS(filePath&Left(PN,6)&".idw", False)
DimSTRNEWREFNAMEAsString
DimOREFFILEAsFILEDESCRIPTOR
[Code]....
View 2 Replies
View Related
Apr 18, 2012
I have working code for opening a cad drawing from an external program. That is perfect.
how can I force a drawing that is NOT readonly to open as readonly from outside cad.
View 9 Replies
View Related
Feb 26, 2013
I am attempting to import an external drawing into my own template. However this particular drawing refuses to insert. I have inserted quite a few from the same source but this one will not insert.
View 9 Replies
View Related
Jun 4, 2013
Is there a way.....
I have a drawing that has external references bound to it. I would like to extract the bound external reference to its own drawing. Can this be done?
View 8 Replies
View Related
Nov 28, 2007
Im drawing on autocad 2008, but im having some trouble with trying to explode an 'external reference' this external reference needs to be edited.
I opened a DWT renamed it and saved it as a DWG, then i used the INSERT/EXTERNAL REFRENCES/ATTACH DWG to bring in drawing. When i select the explode button i cant select the drawing i need to edit.
View 8 Replies
View Related
Jan 21, 2013
I have three drawing constructs.I have door tags and room tags. I have schedules. All work just fine. However, I need to combine all three Finish and all three Door schedules into one multi-level schedule for each, doors and finishes. In views, I schedule the external references by selecting the YES option in the properties dialog box. The problem is that the drawing contains doors and spaces that I do not want to be part of the schedule. How do I deselect the objects that I want to be in the schedule?
The other problem is I can only select one drawing. It makes no sense to have separate schedules for each floor on a small project where there are only 10-20 rooms. As a work around I can create the schedules in constructs, import all the constructs into a view, clip all the constructs and the stitch the tables together. This is cumbersome, does not update seamlessly and results in unnecessary file sizes.
View 5 Replies
View Related
Nov 25, 2011
Using Autocad 2000 LT. Need to create a 2D basic drawing showing 14 TPI external and internal threads with a certain class of fit joined togeather. The basic drawing needs to be drawn in such a way that it could be easily changed to show different Threads Per Inch and or class of fit. Then, with that approach in mind, what would be the basic steps I should take in order to create the basic drawing and then easily change it to show different TPI and or class of fit. Note: I only need to show the external and internal threads, not the entire screw or object attached.
View 6 Replies
View Related
Nov 10, 2012
Is it possible to contol the visibility state of an external referenced drawing? I have an architectural plan drawing that uses a titlesheet drawing as an external reference. In my civil plan i want to use a different title sheet. Instead of having a different titlesheet drawing for the civil drawing i was wondering if i could turn my titlesheet drawing into a dynamic block. In my architectural drawing i would see visibility state #1 & in my civil drawing i would see visibility state #2.
View 1 Replies
View Related
Dec 31, 2013
[URL] How-to-programmatically-find-all-references-xref-dwg-jpg-pdf-OLE/m... I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, and I don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), ie find all the drawing files that reference my jpg file
Intel i7 3.33Ghz, 16Gb RAM
Nvidia Quadro 2000D
C3D 2012 SP4, holding off on C3D 2014
Win 7-64
View 2 Replies
View Related
Nov 29, 2011
I am not too bothered which version of AutoCAD it is, but I have access to 2011.
Where can I get the proper and detailed documentation.I reference acdbmg, acmgd as well as Autodesk.AutoCAD.Interop.
View 5 Replies
View Related
Aug 15, 2013
I have a recurring problem that I can't seem to figure out. I have my existing grade TIN surface as a data shortcut into my roadway design file, but it sometimes will not update when opening the drawing. The surface profile will not display until the surface is manually synced. Any labels that are associated with that surface (or other object) will just display the ??? because it can't seem to connect to the data. After a manual sync it seems to come back.
View 9 Replies
View Related
Feb 9, 2012
I was able to take the attributes from block references in independent .dwg files and and bring them across to a new drawing via import. At this point, there are a few attributes that I would like to be able to add to each block reference once it's created. I've designed a GUI where users can input data, and this input (string data) I'd like to add to the block reference as a tag and a corresponding value.
The basics I understand are to create an attribute reference object. Set the properties / parameters for this object (tag and value (originally as a string) and them append the attribute to the block reference. What i don't know how to do is to actually create the new tags and values in the code so that they can later be appended. I'm in C# and so far i've got this:
foreach (ObjectId id in blockBtr)
{
if (id.ObjectClass == RXClass.GetClass(typeof(AttributeDefinition)))
{
[Code]....
View 6 Replies
View Related
Mar 2, 2012
Whenever I use "attachimage" within a drawing, I specify relative path. I would assume that if I open the file on another computer, AutoCAD would be able to find the image as long as it is in the same folder as the DWG file. This is never the case. I always get an error message stating that the reference is missing and it asks if I want to update its location. What good is specifying a relative path then? I'm using AutoCAD 2010.
View 9 Replies
View Related
