3ds Max :: Localize All External Material References?
Nov 13, 2012
Is there a way to localize all external material references? For instants I created a framing square with the proper materials assigned. When merged with another file it looses its bit map image placement so have to re-fit every thing again.
I needed to use an xref so loaded up the external references box to view all available xrefs. Since i did this i cant get rid of the xref box. Its there whenever i load cad up, load a new drawing and when switching clean screen on and off. Ive tried the close button in the top corner but it still returns.
How to use External references?? i have worked in autocad but i dont know how to use this command, i have to do about 250 drawings of External references.
Is there a procedure or command to use on an opened drawing to see if the drawing is used as an external reference anywhere else? For example, can I open Drawing A and determine whether it is used as an external reference in Drawing B without going to Drawing B and looking at the external references palette?
I've been asked to create several drawings using one external reference which contains doors, bund walls, lighting etc. My question is how do I take this external reference and create several new drawings when I cant even turn layers on or off once I have inserted it onto my new page?
I have a DWG file with wipeouts. When I use the files as external references in another DWG and print to PDF the wipeouts do not work and all that is seen is the wipeout line. Is there a way to have the PDF have the wipeouts appear as they should?
I use this palette all the time and keep the icon displayed (in hidden form) on every session that I open. I started AutoCad this morning and "external reference" icon was not displayed on the screen. I went to the tools tab and selected the external reference palette. A box was displayed that could not be hidden and all screen function were stopped until I closed this box.
I went to customize tool palettes and compared it to the properties palette and they looked the same. I want to get my external reference palette function back to the way it was.
I am trying to add a list of External References to MTEXT. The diesel expression $(xrefs) works fine within RTEXT but when I enter it into MTEXT the result shows "$(XREFS)??
I'm trying to adjust the properties of some block objects in Mspace. When the file contains external references the function fails, when it has none it works perfectly.
Dim modelSpace As BlockTableRecord = DirectCast(M_trans.GetObject(SymbolUtilityServices.GetBlockModelSpaceId(db), OpenMode.ForRead), BlockTableRecord) For Each id As ObjectId In modelSpace Dim ent As Autodesk.AutoCAD.DatabaseServices.Entity = DirectCast(M_trans.GetObject(id, OpenMode.ForWrite), Autodesk.AutoCAD.DatabaseServices.Entity) ent.Color = Color.FromColorIndex(ColorMethod.ByLayer, 256)
Using the above to get all objectid's and filter through them then using:
If TypeOf ent Is BlockReference Then Dim br As BlockReference = DirectCast(ent, BlockReference) Dim btr As BlockTableRecord = DirectCast(M_trans.GetObject(br.BlockTableRecord, OpenMode.ForRead), BlockTableRecord) If Not btr.IsFromExternalReference Then
A "MODEL" drawing exists that contains only the surface model. The surface model is data referenced into a "LABEL" drawing that contains the surface style (contours), contour labels, and spot elevations. This "LABEL" drawing is xref-ed into a "SHEET" drawing that contains the title block and some other xrefs containing the proposed layout, ex cond, etc..
When I open the "LABELS" drawing, the data reference works. My problem is that when I open the "SHEET" drawing, the contour labels and spot elevations cannot find the referenced surface and just contain a string of 20 or so characters.
I already have a workaround. If I open the "SHEET" drawing, then open the "LABELS" drawing and save it, I can reload the "LABELS" drawing within the "SHEET" drawing and the problem is solved.
HOWEVER, I have a bunch of sheets that I want to publish, and publish does not work when you have to open the file and re-reference everything. Is there anyway to get this reference working correctly so that I do not have to open multiple drawings to get my data correct?
FYI, I have already tried resetting my data shortcuts project folder, validating data shortcuts, etc. in the "LABELS" and "SHEET" drawings.
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
I am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
I upgraded to 3DsMax 2011 and still have some problems navigating the Slate Material Editor. I want to create a Mix material as the "first" material but I'm only able to double click on the Sample Slot to get a standard material in the "View1" as my "first" material. I am able to create a "Mix" node here, but it has to be connected to the "Standard" material and this makes it so that i can not drag the material in to the "Environment and Effects" tab as my "Environment Map".
When i go back to the "Compact Material Editor" (which waists time), I can select the Standard icon but "Maps" is not available in the "Material/Map Browser" when i right click on an open space.
Im on Max 2011 with sp1 and the latest hotfix installed, working with vray 1.5 sp5. When i try to re-set mu material editor (compact not slate) i get the folllowing error message
"Runtime error: cannot assign undefined to material editor slots" and a Macro_media utilities window opens with the following script
macroScript clear_medit_slots enabledIn:#("MAX", "VIZ") category:"Medit Tools" internalCategory:"Medit Tools" ButtonText:"Reset Material Editor Slots" tooltip:"Reset Material Editor Slots" [code]....
I'm not a scripter but it seems that there is no material defined to place into the slots on re-set. I've recently had a problem with my material editor not giving me acess to slate as i had loaded up my 2010 menus into 2011 but i've since re-installed max and vray and am still getting this.
[URL] How-to-programmatically-find-all-references-xref-dwg-jpg-pdf-OLE/m... I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, and I don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), ie find all the drawing files that reference my jpg file
Intel i7 3.33Ghz, 16Gb RAM Nvidia Quadro 2000D C3D 2012 SP4, holding off on C3D 2014 Win 7-64
I have a recurring problem that I can't seem to figure out. I have my existing grade TIN surface as a data shortcut into my roadway design file, but it sometimes will not update when opening the drawing. The surface profile will not display until the surface is manually synced. Any labels that are associated with that surface (or other object) will just display the ??? because it can't seem to connect to the data. After a manual sync it seems to come back.
I was able to take the attributes from block references in independent .dwg files and and bring them across to a new drawing via import. At this point, there are a few attributes that I would like to be able to add to each block reference once it's created. I've designed a GUI where users can input data, and this input (string data) I'd like to add to the block reference as a tag and a corresponding value.
The basics I understand are to create an attribute reference object. Set the properties / parameters for this object (tag and value (originally as a string) and them append the attribute to the block reference. What i don't know how to do is to actually create the new tags and values in the code so that they can later be appended. I'm in C# and so far i've got this:
foreach (ObjectId id in blockBtr) { if (id.ObjectClass == RXClass.GetClass(typeof(AttributeDefinition))) {
Whenever I use "attachimage" within a drawing, I specify relative path. I would assume that if I open the file on another computer, AutoCAD would be able to find the image as long as it is in the same folder as the DWG file. This is never the case. I always get an error message stating that the reference is missing and it asks if I want to update its location. What good is specifying a relative path then? I'm using AutoCAD 2010.
I have recently configured various borders for our Inventor software and have now turned to AutoCAD to do the same.
Within Inventor you can specify grid references around the border. eg A-F along the top and 1-5 on the vertical. Can this be done with AutoCAD 2011????
ACA2011.I've got a construct that for some reason has 2 xrefs listed within it that I can't detach. It says that it is unresolved and when I try to detach it it says "c_Floor Plan - First" has multiple references, Not detached." This is one of two xrefs in the drawing doing this...how is it possible to have an xref of the same name in the drawing? I can't figure out how to detach it. It was causing problems in the view to which it was referenced, and I solved it by creating a bogus, blank construct called "test" and changed the path of the xref in the construct to this drawing...but I still can't detach it.
Possible to open a drawing that was created with AutoCad Civil3D 2011 and create all of your Civil objects and data references if it is a bad idea to then open it at a later date in AutoCad Civil as Autocad 2011. Does this effect any of the data in the drawing. It has been recommended here that we do this for making minor line/text edits as some folks have slower computers that cant handle the civil side of the program.
why we are constantly facing corrupt drawing files that lose references.
lately i am often experiencing a problem, where at the opening of scene, a message pops up saying "The 3ds Max file is made of old PhysX plugin. Do you want to convert to current version?" If i click yes, then max freezes, and even after 10 minutes remains frozen, so i have to terminate the process. If i click no, then this annoying message pops up everytime i open my file. I just cannot track down the reference to PhysX plugin in my scene. I can't find it. Is there any efficient way to search & destroy scene connection with PhysX plugin. It's like a plague slowly spreading across my scenes as i merge objects between them.
So we are wanting to send on a model to a customer. I have used pack and go with the following settings:
Copy to Single Path
Model Files Only
When I try and open the newly created files, it gives a bunch of error messages looking for FEA files, as well as missing some OLE links, which is good as I don't want to send on any FEA information with the model, but is there a way to strip that out completely from the model without having to go through each individual file and deleting all of the simulations?
I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, andI don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), i.e. find all the drawing files that reference my jpg file?