Photoshop :: Renumbering Timelapse Files
May 1, 2013Bridge is just plain flaky when it comes to renumbering a large number of files, so that I can import into photoshop as an image sequence. (I'm on windows)
View 3 Replies
ADVERTISEMENT
Photoshop :: Timelapse Video - Can't Rendered - CS4 Extended?
Mar 8, 2012I'm trying to do my first timelapse video and am having problems rendering the video.I have Photoshop CS4 extended. When I try to find Window -> Workspace -> Motion I can't see 'motion'.
Then when I try to File->Export->Render Video I get the error message 'The procedure entry point CFWriteStreamGetTypeID could not be located in the dynamic link library CoreFoundation.dll After pressing 'ok' a few times I also get error message 'Theprocedure entry point CFPreferencesGetAPPBooleanValue could not be located in the dynamic link library CoreFoundation.dll
I then am taken to the render video dialogue box, but when I click render I get the error message 'Could not complete the render video command because invalid parameters were sent to a command'
Lightroom :: 5.3 Export With Sequence Renumbering
Mar 30, 2014I just discovered an issue with the LR5.3 Export module on my Windows 7 system when exporting JPEG image files with 'Sequence' File renaming and 'Original' File Settings to a subfolder. When exporting approximately 100 JPEG image files LR shows a file count in the subfolder of ~1/2 the actual file count and the ability to 'Synchronize Folder' disappears. The correct number of files appear in the subfolder using Windows Explorer, so they all were successfully exported and renamed properly. LR must be closed and reopened to restore the ability to 'Synchronize Folders' and/or 'Import' images using the Import module. I've never encountered this problem before since I normally process raw image files, which do not exhibit this issue.
View 2 Replies View RelatedAutoCAD Inventor :: Balloon Renumbering Across Sheets
Jun 15, 2012I am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition
Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1)
partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
AutoCAD Inventor :: BOM Renumbering And Part List Sort By Item (iLogic)
May 15, 2013i = MessageBox.Show("Do you wish to Renumber & Sort BOM?", "My iLogic Dialog", MessageBoxButtons.YesNo, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1) If i = vbyes ThenTrace.WriteLine ("INV - Transfer; User Selection; Do you wish to Renumber & Sort BOM? - YES")'Renumbers & Sort BOMoPartsList1.Renumber oPartsList1.SaveItemOverridesToBOMoPartsList1.Sort("ITEM") Trace.WriteLine ("INV-ExternalRule - Renumber & Sort BOM#")Else if i = vbno Trace.WriteLine ("INV - Transfer; User Selection; Do you wish to change Renumber & Sort BOM? - NO")End if
what i want to do, is renumber the BOM by (001) then go to part list and sort by item.
Photoshop :: Any Way To Batch Process Color Corrected RAW Files To TIFF Files
Nov 11, 2013I got over 160 color corrected RAW files from my photographer when I thought I was getting TIf or PSD files. I need to put them into an in design doc to send out for printing. Is there a way to convert all of these in one fell swoop without messing up the work that has already been done?
I didn't allow in my timing to save each one individually since i didn't know I was going to need to do this. I am really unfamiliar with batch processing, so how to best go about this, or if I even can. I am working in Photoshop CS6. version 13.06 x 64.
Photoshop Elements :: Copy New Files Only (Ignore Already Imported Files) Not Working
Dec 27, 2013I am using Photoshop Elements 10 Version 10 (20110831.m.17215) and everytime I plug in a memory card to upload images it wants to upload every image on the card, even though it has previously uploaded images from that card, even though I have the "Copy New Files Only (Ignore Already Imported Files)" box ticked in the preferences Camera or Card Reader section. This gets very frustrating and time consuming when I have to go through the images every single time to uncheck the images that have already been uploaded.
View 3 Replies View RelatedPhotoshop :: CS6 Won't Play Or Process Dolby Digital (AC-3) Audio Files From AVCHD Video Files
Jun 13, 2013Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
View 1 Replies View RelatedPhotoshop :: Unable To Open Files Or Create New Files In CC Trial
Oct 15, 2013After getting no support from your phone support line. I am writing here in hopes that this issue can be resolved. I cannot open files or create new files in Photoshop CC trial.
View 3 Replies View RelatedPhotoshop :: Convert Full Resolution Files To Web Based Files
Jun 6, 2012I am working on a museum project. I have been asked to convert full resolution files to web based files using "Save for Web and Devices". The problem is in the file naming. Museums typically use accession #s for each work. Example 1999.63.102 So the digital file would be named 1999.63.102.jpg (or tif).
When I attempt to save the file using "Save for Web and Devices" the resulting name is converted to 1999.jpg I believe the . (periods) to be the culprit. There are hundreds to do so renaming is not an option. This does not occur when I use "Save as".
Photoshop Elements :: 12 Hides Panasonic RAW Files - Unhide The Files?
Jan 2, 2014PSE 12 has a new feature under Preferences/Camera or Card Reader called "Alutomatically Stack RAW and JPEG." Checking this will stack a RAW & JPEG file combination, i.e., when shooting with the camera's RAW + JPEG setting checked. In my case PSE 12 appears to stack my Panasonic RAW files and each JPEG thumbnail shows the right facing arrow to expand the stack. When I click the arrow the arrow disappears but the stack does not expand to reveal the RAW file. The RAW file still exists on the hard drive, but I can't find any way to reveal it in PSE (I've not tried to re-import the RAW files because there are a lot of files in a lot of folders.) This is rather critical and needs to be fixed.
View 11 Replies View RelatedPhotoshop :: Why DNG Files From RW2 Raw Files So Large (37MB)
Mar 29, 2012I have a fairly new Panasonic Lumix LX5. I've recently converted a few files to DNG. They're turning out to be @ 37MB, over three times larger than the original file.
I'm not embedding the original raw files in the DNG. NEF files I convert from my Nikon D2x are around 9.5MB. I'm running Mac OS 10.5.8, DNG v 6.6 and also use PS CS5.5 and Lightroom 3.0.
Photoshop :: CS6 Disable Compression Of PSD And PSB Files - 8 Bit Files Too?
Aug 19, 2012I'd like to know if the new CS6 Preference which allows users to "Disable Compression of PSD and PSB files" applies to 8 bit files.
The reason I am asking is that the DisallowFlateCompressedPSD registry change for CS5, which disables compression of PSD and PSB files does not work for 8 bit files (it only works for 16 bit and 32 bit files)I work on large 8 bit files (4-8GB) and would like to know if CS6 would allow me to disable compression on those files.
Photoshop :: 3D LUT Files / Difference Between LOOK And ICC Files
Apr 27, 2013er to color grading, I would like to ask about the difference between .look files and .icc files. As far as I understand .look files contain 3d luts and .icc profile files also contain those luts. What is the difference between these two file types?
View 10 Replies View RelatedCorelDRAW Graphics Suite X5 :: Saves Of CDR Files Stopped Working Just Get Blank Files?
Oct 28, 2013Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies View RelatedIllustrator :: Files Don't Show Up In Acrobat File List When Trying To Combine Files Into Single Pdf?
Sep 24, 2013Illustrator files don't show up in Acrobat file list when trying to combine files into a single pdf
View 9 Replies View RelatedLightroom :: Will Current Plugins For Sigma DP1/2 RAW Files Work With Files From DP1/2 Merrill Cameras
Oct 24, 2012Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?
View 2 Replies View RelatedAutoCAD .NET :: Read Excel Files Through Script Files / Declare Variables
Oct 1, 20131. Is it possible to read excel files through script files.
2. Can I declare variables in script files.
Illustrator :: Linked PSD Files Not Found When Opening AI Files Via Shared Folder
Mar 17, 2013My main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Lightroom :: Scrambling Raw Files - Affected Raw Files Open Fine In Other Programs?
Mar 27, 2014After many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies View RelatedLightroom :: Nikon D600 - Deleting Files And Saving Files Brings Up Error Message?
Feb 25, 2013Deleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies View RelatedAutoCAD 2010 :: Automatically Updating DWG Files Made From DWT Files
Mar 26, 2013I have loads of dwgs made by a former employee at another site that have our company logo in the tile block. I need to replace the company logo with a new one. If it were not made from a dwt, I could change the .dwg file and just reinsert the block and let it redefine the block, done. But since all of the text in each drawing was input using a template, I cannot do this without losing all of that data. We are not permitted to explode the title block, delete the old logo & add a new one as the drawing format needs to remain as one entity. Is there a way to automatically update these dwgs without re-entering all of the title/revision block text on every drawing?
View 2 Replies View RelatedAutoCAD 2013 :: Exporting Existing DWG Files As DWFx Files?
Jan 8, 2013what is the command in AutoCAD 2013 for exporting drawings as DWFx files so that clients who do not have AutoCAD can open or plot a DWFx file using a current version of Internet Explorer or Safari for Apple as an alternative browser.
View 2 Replies View RelatedAutoCAD LT :: Unable To Save Files / Creating TMP Files Instead 2014
Apr 17, 2013I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
AutoCAD Civil 3D :: Files Range From TMP Files To Texture Folders
Feb 5, 2013Deleting temp files, if I can just do a blanket Erase, or will this potentially damage autocad drawings. My temp file is on my local drive, but all of our drawings are stored on a network drive. It seems to me I remember these things storing up over time with crashes, etc. But as they build up performance seems to dwindle.
These files range from .tmp files to Texture folders, .cvr files, and nonsense names like A$C5DCD5F31.Can I just window and Delete All?
AutoCad :: How To Attach Number Of TIFF Files To Individual DWG Files
Oct 30, 2013I am trying to attach a number of tiff files to individual dwg files. There are about 300 so I am writting a script that will open a new dwg, insert the tiff and save the dwg at a given name, so i have filedia set to 0 and everything is user input.
The problem I am having is that when I use the iinsert command and enter the path for the tiff I get this error: (filename)was not found or is not valid. This is pathed to a network drive. When I copy the same folder to my c: drive and run the command everything works as should. is there any reason for this?
When pathed to the c: drive and working correctly it looks like this:
C:UsershbrittDesktop11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
When pathed to the network it looks like this:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70-B-F101.TIF
I get this error:
G:EngineeringCURRENT JOBSMOTIVA11301 DCS Migration Phase 2 Execute Engineering Detail DesignDRAWINGSWORKING SETLOOPSDEMOD70 was not found or is not valid.
I noticed in the error message it cuts the end of the file name off. Is there a character limit?
I have done this before with a path to the network and everything worked as should. We have recently upgrade to 2013 but i would'nt think that would be an issue.
So basically, file on local drive everything inserts fine. File on network, get error.
AutoCAD Visual LISP / AutoLISP :: Convert DGN Files To DWG Files?
Feb 8, 2013I want to convert my DGN files to DWG files.
So I write this code in LISP:
(defun C:Batch_DGN2DWG (/path dgnfile SDI_Mode) (setq path "C:\DGN\" ;;Default path for DGN files location. DGNIMPORTMODE 0 ;;Imports the DGN file in a new drawing file. SDI_Mode SDI ;;Save Current SDI MODE SDI 1 ;;SET Single Drawing Mode for AutoCAD. );;setq (foreach dgnfile (vl-directory-files path "*.DGN" 1) (progn (command "-dgnimport" (strcat path dgnfile) "" "" "" "y" (strcat path dgnfile ".DWG")) (delay 100) );;progn );;foreach (setq SDI SDI_Mode) ;;restrore SDI Mode to previous value.)
but I can't finish it!
I attached some DGN files for test purpose.
Illustrator :: Batch Export Of EPS To BMP Files Creates Extra EPS / AI Files
Dec 20, 2012A simple action.
File>Export>.bmpClose
If I run the action on one file, it works perfect.
If I try to run it as a batch, it creates the bmp files fine.
But it also creates either a .ai file, or two .eps files!
Writing one or two extra files signifiantly shows the process down.
After I run the batch it is not hard to simply delete the extra .eps/ai files of course.
But writing those files seriously slows the process down, and I have about 89,000 more files to go.
Illustrator CS4. Windows XP
Lightroom :: Old Files Are Automatically Removed From Program Files Folder
Mar 12, 2012Following previous LR upgrades (3.2, 3.3, 3.4, 3.5 and 3.6), old files were automatically removed from the Program Files folder. However, I just upgrades from 3.6 to 4.0 and notice that the old files are still on my hard drive in the 3.6 folder. Do I need to keep these files or can I UNINSTALL LR 3.6?
View 5 Replies View RelatedLightroom :: How To Export Retouched Files To Hard Drive Files
Jun 22, 2013When I try to export retouched files to hard drive files my Mac crashes and has to be force quitted. I thought this maybe a L'room 4 problem so I bought L'room 5 and it's still happening. What can I do?
View 3 Replies View RelatedLightroom :: Crash In Develop Module RAW Files With Sidecar Files
Jan 12, 2012The issue probably has to do with the differences in settings. I am using the 64 bit version of Windows 7.I imported a group of pictures with the XMP sidecar files generated with Lightroom v3. All the image files, a mixture of Canon Mark 5D II RAW and jpg files from my point & shoot UFO camera, imported without issue picking up all my tagging and GPS settings. When importing you are put into the Library module and from the Library module I could click on any RAW or jpg file, look at the meta data and view full screen.
I then entered the Develop module with a jpg picture selected and none of my settings made it across. The process was set to 2012. I was able to try out the new adjustments and all worked very well.I then selected a RAW file while still in the Develop module and all hell broke loose.
I got a tip window pop up, the film strip went orange, the rest of the app screen then became greyed out and then behind tip pop up a crash window containing this information appeared:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.1
Application Timestamp: 4ef2621d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: c000041d
Exception Offset: 000000000003c1be
[code]....
There was no other path but to have the app close after that. Now since Lightroom has left off with the RAW file in the develop module when I restart the app it starts in the develop module with that same RAW image selected and I crash before I can change to a jpg. I am probably going to have to delete and recreated the data file to use the app again
After the all this I went back and checked to see how I had the catalog settings in LR 3 set because there were no sidecar files for the jpg images. I did not have the option to write settings to jpg and tif files but did have write settings to sidecar set. So I have a bit of a mystery why I have no sidecar files for jpg files when I should have based on the way the settings were. This probably explains why I had no issues at all with them in LR 4.
I am going to get LR 4 working again and then import the same batch of pictures without any sidecar files and see if I have any issues. I will report back soon.