Lightroom :: 5.3 Export With Sequence Renumbering
Mar 30, 2014
I just discovered an issue with the LR5.3 Export module on my Windows 7 system when exporting JPEG image files with 'Sequence' File renaming and 'Original' File Settings to a subfolder. When exporting approximately 100 JPEG image files LR shows a file count in the subfolder of ~1/2 the actual file count and the ability to 'Synchronize Folder' disappears. The correct number of files appear in the subfolder using Windows Explorer, so they all were successfully exported and renamed properly. LR must be closed and reopened to restore the ability to 'Synchronize Folders' and/or 'Import' images using the Import module. I've never encountered this problem before since I normally process raw image files, which do not exhibit this issue.
View 2 Replies
ADVERTISEMENT
Dec 13, 2013
I have collected a number of archival photos that are scanned from various sources. Obviously- when they are scanned the date of origination is the date they were scanned not the actual date the photo was taken. I can remedy this in the 'edit capture time' feature. But there are thousand of photos and this is time consuming and often a guess. So, sometimes being lazy I forget. However, Lightroom allows me to arrange photos in a specific order. So for the sake of this discussion I can arrange histroical images in what I believe is the best the chronological order. Now I want to export these files without scrambing the order in which they are arranged. Not all the dates may be accurate so I don't want to rely on that feature. I want to export the photos in the sequence in which they are arranged. It might be as simple as adding a prefix 1-filename, 2-filename, etc. I've attempted exporting several times in the past but invariably it arranges everything by an alphanumeric sort.
View 6 Replies
View Related
Jun 13, 2012
I have two slrs which I take with me to events, and I'm going through one of my workflow but noticed that the story I'm telling from the even is not in chronologicial order. I think this is because the number sequence on the camera is set to numerical is set so Lightroom has not exported the photo in my desire sequence.
When I want to export the photos into JPEG, is there a way to choose which photos goes in which sequence?
View 1 Replies
View Related
Sep 17, 2013
Is there a way to persuade LR to export a sequence beginning with name-01.jpg instead of name-1.jpg so the images sort properly?
View 3 Replies
View Related
Jun 2, 2013
How do you control the image export sequence when exporting to DVD via LR4?
View 7 Replies
View Related
Dec 2, 2012
Exporting jpgs is fine to watch them on TV or wherever. The problem is the incorrect order in the resulting filenames. They go likepic-1
pic-10
pic-11
pic-2
pic-3
...
MUCH BETTER would be:
pic-001
pic-002
...
pic-010
pic-011
just like Photoshop Elements does it.
View 5 Replies
View Related
Sep 12, 2011
Is there anyway to export an OBJ sequence from Maya 2012? I found an old script for it but it is not compatible with 2012. I want to be able to export an animated OBJ sequence to use in Trapcode Form as a base shape for a particle system.
View 4 Replies
View Related
Dec 12, 2013
I'm trying to export a sequence as XML, but no matter what I try, it exports the wrong sequence. I've tried selecting the sequence in the project panel, then hitting export, and I've also tried opening the timeline and exporting from there.
The sequence being exported is actually used at one point in the sequence I want to export, otherwise I would just delete it temporarily. I'm using Premiere CC 7.2.
View 6 Replies
View Related
Nov 11, 2011
is there any way to export max 2012 animation to obj sequence?
View 2 Replies
View Related
Aug 27, 2011
I have a animation and want to export the animation to sequence images. The sequence images is in the custom selected area.
I just know to use the Rendered Frame Window to render an image with selected area and save to a png file. But I cannot do that for every key frame.
View 1 Replies
View Related
Jan 4, 2014
I'm working on a project that requires creating an animation in After Effects that is then imported into Sprite kit using a numbered png sequence. I'm aware that using hashes [#####] allows you to add the amount of zeroes you want in the filename for numbering the frames, but is there any way to export without any zeroes?
(eg. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 rather than 01, 02, 03, 04, 05, 06, 07, 08, 09, 10)
View 3 Replies
View Related
Jun 5, 2013
I'm using CS5 (Windows) and I'd like to export a video as an image sequence BUT I want to define the frame interval (e.g. export ONLY every 5th frame and ignore the rest). I guess it's possible to manually delete those frames that I don't need after exporting them; however, I have thousands of frames and it work if I could automate it.
Is it possible to do this in Photoshop or should I look for another software?
View 3 Replies
View Related
Feb 26, 2014
So I shot all the footage in 1920x1080 and the client said they wanted 1280x720 .mov files as final output.I edited the 1080p footage in a 720p sequence so I could reframe a bit. Now they want 640x480 .mov as final output. I can easily find presets for .mp4 at 640x480 but I'm struggling to find a way to export at that resolution in .mov.
View 3 Replies
View Related
Oct 8, 2012
Can Smoke export XML?
What if I edit in smoke and want to export an xml of my sequence for color correction in another app that imports xml.
View 9 Replies
View Related
Oct 31, 2013
is it possible to export to a movie just a particular part of the sequence (say frame 100 to 500) similar as you can do in After Effects exporting just a work area?
View 2 Replies
View Related
Aug 24, 2013
Having cut together a short commercial recently, I have been unable to export my sequence/ work. There are no error messages, only incomplete exported versions of the sequence (sometimes 1 second, sometimes 8 seconds!) or nothing at all. It will go through the motions and not generate an exported file.
I have attempted to export my sequence multiple ways - from the timeline, from the media library and from the mediahub - with identical results. I'm totally at a loss. I've also gone back to a sequence which I was able to export successfully one month ago and now I get the same problem - either no result or some fractional piece of the edit - never more than a few seconds. My finished edit, by the way, is a 30-second spot.
For example, here's one way I've attempted to export:
1. I select my sequence from the media library and right-click for export.
2. I select movie, choose my destination, and select a format preset (I've tried just about every preset, hoping it was a preset error of some kind), and
3. I hit export.
Instead of the spinning prompt in the lower left corner, showing me a percentage countdown (or count-up) - which was present a month ago when I was las exporting a show -I get a quick audio mixdown prompt in the lower left then nothing. It all happens in less than 1 second from the time I press "export".
I've copied the console log for your review. This particular effort/ screenshot resulted in an 8-second clip, which is the longest one (still incomplete) I've been able to generate since I attempted to export starting yesterday. Again, my sequence is 30 seconds, and it either does nothing, generates an empty file (45k in size) or creates an incomplete movie file (usually 1 or 2 seconds).
View 9 Replies
View Related
Jun 21, 2012
I've been called upon to use Smoke as an intermediate between offline and color session elsewhere. I need to export a DPX sequence for the colorist to work from. Can I easily do this in Smoke? Just conform the offline and export DPX sequence? Also, can I put in handles and include original source timecode?
View 4 Replies
View Related
Jul 30, 2012
Any plugins that will do the job in GIMP?
View 3 Replies
View Related
Jun 29, 2012
In a future release of Smoke 2013, will it be possible to export an xml to send a sequence to DaVinci Resolve since Autodesk Lustre still does not work on mac?
I understand that Smoke has some great color correction tools, but when it comes to be fast and productive, a dedicated color grading application is what is needed.
View 9 Replies
View Related
Jan 21, 2014
I edited an online video dictionary (about 7,500 five second clips) and have them all in sequences in Premiere pro CC waiting to be exported. I hae been battling for two weeks now day in and day out to try and export... I am limited to batch exporting this project and have never had problems with adobe softwares in five years ( a great track record). I have tried many ways of importing or exporting the sequences to Media Encoder CC, and have experienced crashes every single export attempt. As soon as I add more than 5-10 clips the program crashes when I start the que. I badly need to deliver this product, any patch that will keep ME from crashing when you add more than a couple clips?
View 1 Replies
View Related
May 1, 2013
Bridge is just plain flaky when it comes to renumbering a large number of files, so that I can import into photoshop as an image sequence. (I'm on windows)
View 3 Replies
View Related
Apr 23, 2013
I need to generate a lightning effect and then export the frames to several PNG images.
I figured out how to do the lightning and how to export transparent PNGs, but I can't get rid of the lightning solid background (which is balck in my case).
View 2 Replies
View Related
Jun 15, 2012
I am trying to modify the code Brian Ekins posted on Mod the Machine to renumber balloons across sheets. [uRL ....
It works great unless the item on the additional sheet is a sub-assembly. I believe it is because PartDef is declared as a PartComponentDefinition and there is nothing in the code to handle an assembly.
Dim partDef As PartComponentDefinition
Set partDef = drawBOMRow.BOMRow.ComponentDefinitions.Item(1)
partInfo(I - 1).ReferencedFile = partDef.Document.FullFileName
The Set partDef line was giving me a runtime error when it came to an assembly in the BOM until I added
"On Error Resume Next" at the start of the loop.
I tried changing the declaration to ComponentDefinition. It compiled fine, but didn't do anything. I think I'll have to add some duplicate code to handle an assembly in the BOM. Is there a better way to do this? Am I even on the right track?
View 3 Replies
View Related
May 15, 2013
i = MessageBox.Show("Do you wish to Renumber & Sort BOM?", "My iLogic Dialog", MessageBoxButtons.YesNo, MessageBoxIcon.Warning, MessageBoxDefaultButton.Button1) If i = vbyes ThenTrace.WriteLine ("INV - Transfer; User Selection; Do you wish to Renumber & Sort BOM? - YES")'Renumbers & Sort BOMoPartsList1.Renumber oPartsList1.SaveItemOverridesToBOMoPartsList1.Sort("ITEM") Trace.WriteLine ("INV-ExternalRule - Renumber & Sort BOM#")Else if i = vbno Trace.WriteLine ("INV - Transfer; User Selection; Do you wish to change Renumber & Sort BOM? - NO")End if
what i want to do, is renumber the BOM by (001) then go to part list and sort by item.
View 9 Replies
View Related
Feb 17, 2014
After selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
View 3 Replies
View Related
Jan 4, 2012
I have just returned from a vacation with 12,000 photos, I have culled down to 2000 ( taken with 4 different cameras).
is there some way of arranging for the photos to be arranged in"date taken sequence" before downloading to Dvd's????
I am using lightroom 3.6 on a Mac
View 3 Replies
View Related
Jul 30, 2013
I need to know how to place my photos in a story telling sequence in Lightroom instead of the order the photos were taken.
View 1 Replies
View Related
Aug 10, 2013
I have a file on my computer that contains photos from two cameras that took photos over the same three week timespan. I have sorted them by date and time. When I import the file the photos from one camera show first followed by the photos from the other camera. How can I import or resort in LR3 to have photos in date/time sequence?
View 2 Replies
View Related
May 29, 2012
It seems that this should be possible, but I'm not seeing any way to do this. When I go into CS6 from LR4, I'd like to be able to rename the file I'm working on (say 20120422-145) to 20120422-Edit-145 but at best I can rename it 20120412-145-Edit-145
Adding the edit tag prior to the sequence id keep things better organized in the browser and enabled rename on export to properly extract the sequence ID.
View 2 Replies
View Related
Mar 1, 2014
Win 8.1 64 bit A Toshiba Satellite laptop, LR 5.3. When I try to export I get a window without export buttons at the bottom to do the export. Further if I try to resize the export window the export window disappears and LR freezes requiring to ctrl/alt/del to close it. I cannot export anything to HD or email, etc.
I was in a class last night where everyone had Macs and the buttons appeared on their versions and worked fine. Totally repeatable. I can supply screen shots.
Makes LR totally useless.
View 3 Replies
View Related
Jan 20, 2013
I've created various snapshots of a series of photos and I'm ready to export. Is there a way to export all the snapshots at once, in a single export step? Up to now, I've been doing this step by step, exporting one version of the image, than going to the next snapshot and exporting again.
View 3 Replies
View Related
