Exporting jpgs is fine to watch them on TV or wherever. The problem is the incorrect order in the resulting filenames. They go likepic-1
pic-10
pic-11
pic-2
pic-3
...
MUCH BETTER would be:
pic-001
pic-002
...
pic-010
pic-011
just like Photoshop Elements does it.
When exporting an image and specifying to resize 1500 pixels on the long edge I get this result 2541 x 1500, which is exactly the same result when I specify the short edge. I have tried this with cropped images and with uncropped images.
View 3 Replies View RelatedI have a hard drive published service configured in Publishing Manager that creates JPGs of any images that are placed into that published service. For the most part all the settings I specify on that service are adhered to when I "publish now". However one setting appears to be ignored and that is File Naming | Rename To:.
In the configuration of that option in Publishing Manager I have the rename to option set to "Filename - Sequence". When this option is set the example text it states at the bottom of file naming displays what I expect it be on output. However, when I "publish now" the file exports but with the original file name of the photo. Let me explain further. Typically when I've fully processed the photo I use the Lightroom file rename option to rename the file from the orginal import name to something more descriptive.
This seems to work fine with both the information in LR and the actual file name being correctly displayed. Even when I select the file for publishing the example file name show matches the new name after rename. However, the actual file generated always as the original imported file name. This happens for all files.
I'm using LR 5.2 on Windows 8.1.
I just discovered an issue with the LR5.3 Export module on my Windows 7 system when exporting JPEG image files with 'Sequence' File renaming and 'Original' File Settings to a subfolder. When exporting approximately 100 JPEG image files LR shows a file count in the subfolder of ~1/2 the actual file count and the ability to 'Synchronize Folder' disappears. The correct number of files appear in the subfolder using Windows Explorer, so they all were successfully exported and renamed properly. LR must be closed and reopened to restore the ability to 'Synchronize Folders' and/or 'Import' images using the Import module. I've never encountered this problem before since I normally process raw image files, which do not exhibit this issue.
View 2 Replies View RelatedI have collected a number of archival photos that are scanned from various sources. Obviously- when they are scanned the date of origination is the date they were scanned not the actual date the photo was taken. I can remedy this in the 'edit capture time' feature. But there are thousand of photos and this is time consuming and often a guess. So, sometimes being lazy I forget. However, Lightroom allows me to arrange photos in a specific order. So for the sake of this discussion I can arrange histroical images in what I believe is the best the chronological order. Now I want to export these files without scrambing the order in which they are arranged. Not all the dates may be accurate so I don't want to rely on that feature. I want to export the photos in the sequence in which they are arranged. It might be as simple as adding a prefix 1-filename, 2-filename, etc. I've attempted exporting several times in the past but invariably it arranges everything by an alphanumeric sort.
View 6 Replies View RelatedI have two slrs which I take with me to events, and I'm going through one of my workflow but noticed that the story I'm telling from the even is not in chronologicial order. I think this is because the number sequence on the camera is set to numerical is set so Lightroom has not exported the photo in my desire sequence.
When I want to export the photos into JPEG, is there a way to choose which photos goes in which sequence?
Is there a way to persuade LR to export a sequence beginning with name-01.jpg instead of name-1.jpg so the images sort properly?
View 3 Replies View RelatedHow do you control the image export sequence when exporting to DVD via LR4?
View 7 Replies View RelatedI’m working with an external team of artists and they supply meshes to me in .3ds file format. They just upgraded to 3ds Max 2013, and now the materials defined in the .3ds files don’t seem to have textures associated with them. I can see using a binary diff on the file versions that the material names have also been contracted to just their first letters. I have found the material names elsewhere in the file, but not the texture filenames.
Has something changed in the .3ds exporter with Max 2013? The files are coming out significantly smaller, which is good, but without the textures in materials I can’t use them.
How to change the attribut order in the question sequence.
View 6 Replies View RelatedWhen I import images as a sequence in AE CC (v.12.2.1.5), I select an image, then check the 'JPEG Sequence'. Sometimes I have folders that contain missing files, in that I case I also check 'Force Alphabetical Order'.
However, it seems that this is not working correctly now. Some part of the sequence is correct, but there are also some images that appear at random places in the sequence. Is this a bug? What should I do to avoid this?
Any routine that will allow to draw a polyline through existing blocks, in the order the blocks should be numbered? Therefore when the sequence has been specified by the polyline then user to define the number system required, and the blocks are automatically numbered in the sequence of the polyine start to finish.
View 9 Replies View RelatedI know a file with the same attributes of an existing image cannot have the same filename and that duplicates will add '-2. But the images I'm importing are not already in a Lightroom catalog. I don't understand why Lightroom is adding '-2' to the end of each filename.
View 4 Replies View RelatedMy original images have a filename like IMG 1234_cr2 etc.How to you change all the filenames in a Catalog.
View 1 Replies View RelatedI'm trying to move to a new computer (goign from an OS X system to a Windows 7 system), and I've discovered that one of the characters I've been using in some of my filenames is illegal in Windows. I need to change that character so these filenames are acceptable to Windows without losing the associations in LR (virtual copies, metadata, etc.). However, I can't seem to find a way o do this in LR. There are too many of them to do this one at a time, either renaming them individually in LR or using another utility to bulk rename and then reassociating the files individually in LR. Is there a solution to this I am missing?
View 19 Replies View Relatedfor rendering purposes (we work on stop-motion-stop films) in our company's processing workflow, I export many different image sequences with 1000 or more JPG images from many different RAW NEF folders. All these folders with 1000s of RAW NEF files get developed and then exported as JPGs
- into folders on various volumes on servers. so other people then further render from these folders in AE or other hosts.
sometimes however, after a week or month, for whatever reason we need to re-develop original RAW NEFs of a folder of a specific set in it's original lightroom folder (from where those JPGs had been exported from).
By knowing a filename like for example _DSC7561.jpg out of a JPG export folder I then would like to quickly find and locate the original folder within the LR4 library, containing e.g. the file _DSC7561.nef from where that JPG was exported from (for specific reasons I can not change all those export JPG folders are on different volumes than the original folders with RAW file sequences).
So, when I sit in front of LR4 on the RAW development stations is there a way to find
- folders in the lightroom catalogue in volumes or over volumes (by their known folder name or part of their foldername)?
- filenames or part of filenames in folders over volumes, or within a volume?
it is so time consuming to scroll all folders to find an original folder with RAWfiles from where we developed and exported JPGs. we keep those RAW folders not only for the original RAW files of course, but also because of the XMP sidecar files with all the development changes. sometimes we even store snapshots or several stages of XMP processing to them.
Of course LR4 offers search for a filename within a folder via CMD+F, but we don't need that actually.
we need CMD+F for the library search for foldernames or folders over a volume at least, but better would be various volumes.
are there any LR4 plugins or tools that solve this? Or did I oversee something?
I can of course search for any folder containing a file _DSC7561.nef outside of LR4 in finder with tools like "Tembo" or "Find any File" easily, but that don't jumps me to the folder in the LR4 library, with all my developement changes.
PS: we don't use keywords, it is not possible with TB of images each week but we use specific sequencing names for image file sequences and structured folders of course.
I'd like to give various virtual copies different filename (or add an appendage to the name) to describe their use. But changing one virtual copy changes all from the same original image. Is there any way to rename them individually?
View 7 Replies View RelatedIs there anyway to export an OBJ sequence from Maya 2012? I found an old script for it but it is not compatible with 2012. I want to be able to export an animated OBJ sequence to use in Trapcode Form as a base shape for a particle system.
View 4 Replies View RelatedI'm trying to export a sequence as XML, but no matter what I try, it exports the wrong sequence. I've tried selecting the sequence in the project panel, then hitting export, and I've also tried opening the timeline and exporting from there.
The sequence being exported is actually used at one point in the sequence I want to export, otherwise I would just delete it temporarily. I'm using Premiere CC 7.2.
is there any way to export max 2012 animation to obj sequence?
View 2 Replies View RelatedI have a animation and want to export the animation to sequence images. The sequence images is in the custom selected area.
I just know to use the Rendered Frame Window to render an image with selected area and save to a png file. But I cannot do that for every key frame.
I'm working on a project that requires creating an animation in After Effects that is then imported into Sprite kit using a numbered png sequence. I'm aware that using hashes [#####] allows you to add the amount of zeroes you want in the filename for numbering the frames, but is there any way to export without any zeroes?
(eg. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 rather than 01, 02, 03, 04, 05, 06, 07, 08, 09, 10)
I'm using CS5 (Windows) and I'd like to export a video as an image sequence BUT I want to define the frame interval (e.g. export ONLY every 5th frame and ignore the rest). I guess it's possible to manually delete those frames that I don't need after exporting them; however, I have thousands of frames and it work if I could automate it.
Is it possible to do this in Photoshop or should I look for another software?
So I shot all the footage in 1920x1080 and the client said they wanted 1280x720 .mov files as final output.I edited the 1080p footage in a 720p sequence so I could reframe a bit. Now they want 640x480 .mov as final output. I can easily find presets for .mp4 at 640x480 but I'm struggling to find a way to export at that resolution in .mov.
View 3 Replies View RelatedWhen I am going through RAW files from my Canon cameras (1Ds MkIII and 6D) I edit them in the develop module and then convert to aRGB or sRGB depending on the output media. They look good in aRGB and sRGB too when I take into account the limitations of sRGB.
---> However, if I try the softproof to aRGB or sRGB the resulting proof crushes dark tones into solid black. Why is this when the actual conversions are way better? The actual conversions look good in both LR and PS CS5.
I have also noticed that when I upload images to my online galleries and view them with Firefox (latest version and color management enabled for all rendered graphics) they appear darker in the darkest tones than what they appear in LR. What gives?
- - - - - - - - -
Further info:
I am using LR 5.3, no updates suggested by the softwareWindows 8.1 clean installThe computer is a new one, fast processor, 32 gigs ram etc.Eizo CX270 hardware calibrated (16-bit internal LUT) with the Spyder 4 in ColorNavigator 6 software.The issue has always been like this
Can Smoke export XML?
What if I edit in smoke and want to export an xml of my sequence for color correction in another app that imports xml.
is it possible to export to a movie just a particular part of the sequence (say frame 100 to 500) similar as you can do in After Effects exporting just a work area?
View 2 Replies View RelatedHaving cut together a short commercial recently, I have been unable to export my sequence/ work. There are no error messages, only incomplete exported versions of the sequence (sometimes 1 second, sometimes 8 seconds!) or nothing at all. It will go through the motions and not generate an exported file.
I have attempted to export my sequence multiple ways - from the timeline, from the media library and from the mediahub - with identical results. I'm totally at a loss. I've also gone back to a sequence which I was able to export successfully one month ago and now I get the same problem - either no result or some fractional piece of the edit - never more than a few seconds. My finished edit, by the way, is a 30-second spot.
For example, here's one way I've attempted to export:
1. I select my sequence from the media library and right-click for export.
2. I select movie, choose my destination, and select a format preset (I've tried just about every preset, hoping it was a preset error of some kind), and
3. I hit export.
Instead of the spinning prompt in the lower left corner, showing me a percentage countdown (or count-up) - which was present a month ago when I was las exporting a show -I get a quick audio mixdown prompt in the lower left then nothing. It all happens in less than 1 second from the time I press "export".
I've copied the console log for your review. This particular effort/ screenshot resulted in an 8-second clip, which is the longest one (still incomplete) I've been able to generate since I attempted to export starting yesterday. Again, my sequence is 30 seconds, and it either does nothing, generates an empty file (45k in size) or creates an incomplete movie file (usually 1 or 2 seconds).
I've been called upon to use Smoke as an intermediate between offline and color session elsewhere. I need to export a DPX sequence for the colorist to work from. Can I easily do this in Smoke? Just conform the offline and export DPX sequence? Also, can I put in handles and include original source timecode?
View 4 Replies View RelatedAny plugins that will do the job in GIMP?
View 3 Replies View RelatedIn a future release of Smoke 2013, will it be possible to export an xml to send a sequence to DaVinci Resolve since Autodesk Lustre still does not work on mac?
I understand that Smoke has some great color correction tools, but when it comes to be fast and productive, a dedicated color grading application is what is needed.