Photoshop :: Photoshop Cs4 Doesn't Refresh

Dec 31, 2008

i'm having a problem with my photoshop extended cs4, it doesn't refresh by turning layers on and off, as well as undo and redo (can't see changes directly, have to click somewhere on the image before refresh)

i tried to update my video drivers but still no luck, btw my gfx is ati radeon x1400 mobile (lenovo t60), i tried to turn it Enable OpenGL Drawing on, but by so, it causes my image to be broken (square everywhere), so i turn it off.

View 13 Replies


ADVERTISEMENT

Photoshop :: CS6 - Data Set File Doesn't Refresh

Dec 26, 2012

There appears to be a bug in CS6 - does this work in any version of Photoshop?
 
Problem - data sets are not refreshed when contents of the data file are changed, despite clicking "Apply Data Set".
 
The latest updates are installed, running on Windows 7 Professional, 64-bit, plenty of RAM and available storage. This has never worked before and appears to be a bug in the software.  I’ve gone so far as to close PS and even rebooted between steps 4 and 5, same problem.  Here's how to recreate it:
 
1. Create a psd, define variables (I've tried both text and graphic layers)

2. Assign csv file as "Data Set", save the psd

3. Run export, close psd

4. Chage data in csv that was defined as Data Set, save and close csv file

5. Re-open same psd

6. Click "Apply Data Set" - nothing happens
 
Data is NOT refreshed regardless of whether Data Set 1 or  “All data sets” is selected.  The only thing that seems to work is to open the PSD and redefine the exact same file as the data set again, then batch export.  Because I'd be dealing with volumes of psd files that use volumes of Data Set files that change daily, this isn't feasible. 
 
Defining (or redefining the same file) cannot be recorded in batch mode, nor through the listener (tried previous version just to see).

View 3 Replies View Related

Paint Shop Pro :: Editing New Layer Doesn't Refresh Properly With 64bit X6

Dec 3, 2013

I have been doing some very simple editing of photo's taking a copy from part of one and pasting it as a new layer on another photo. I can then manipulate the size, placement and orientation easily with my X4 version of PSP.

I just purchased the new x6 and am ASTONISHED that this simple exercise doesn't work at all in the 64 bit version and only partially in the 32bit version of x6. What happens is that the screen isn't redrawing the changes as you move the pasted part around. It can be refreshed manually but gets into such a mess when you are trying to place the image that it's unusable. I go back to X4 and using exact same photo's I can work without any problem.

I'm on win7 ultimate all upto date and an 8800 GTS graphics card with latest drivers. There should be no reason x4 works and x6 does not.

View 4 Replies View Related

AutoCAD 2010 :: Screen Doesn't Refresh And Shows Geometry From Viewports To The Side

Oct 23, 2012

Screen does not refresh and shows geometry from one of the viewports to the side, as you pan the window.

Geometry stays on when you go to model space.

Was working ok until Autocad suggested upgrading video performance.

Will not work even after downloading lastest video driver from NVIDIA

Acad 2012
Dell E6530
NVIDIA NVS 5200M
64-bit

View 5 Replies View Related

Photoshop :: No Refresh

Nov 14, 2008


CS4 EXtended
Nvidia 8800 GTS 512
Intel Quad Q6850 3.0MHz
4Gb ram
3TB Hard drive
Vista 32

Installed CS4, all went well.

When I try and use CS4 the screen does seem to update.
For example. Have an image open..... Grad tool.....
Now the grad doesnt show, until i click on say enlarge or another tool.
Same for everything I do, I have to click on a tool or enlarge to get the screen to update.

View 11 Replies View Related

Photoshop :: CS5.5 Will Not Refresh Image

Sep 4, 2012

will not refresh the image until I move it or go to another viewer and back.  The layers panel refreshes for example but when you turn off layer visability on a given layer or make a change to a layer that change doesn't show in the image pane - until you move the pane or leave the pane and then reselect it.

View 3 Replies View Related

Photoshop :: CS5 Won't Update / Refresh Changes

Nov 18, 2013

I am having issues with my Photoshop CS5, for some reason if I make any changes to my PSD they don't display straight away as normal, I have been having to zoom in/out of the PSD to force the changes to appear, whether its adding/editing text or images, just anything won't show straight away like it used to. I haven't added any plugins that I know of, it's pretty stock standard version 12.0.4 x64 and I assumed it maybe graphic card related so just updated to the latest drivers with no luck so i'm lost..

View 1 Replies View Related

Photoshop :: CS4 Refresh Of Menu Bar

Mar 1, 2009

If I open a dialog window (for example, edit/Color Settings or help/about)
and close the dialog, a single blank line appears in the middle of the menu
line (from File to X). If I minimize/restore PS window, the menu line
returns to normal. If I mouse over an item on the menu line, its appearance
returns to normal.

View 12 Replies View Related

Photoshop :: Screen Refresh Issue.

Jun 26, 2008

I just started using Photoshop CS3. I've found that when using it occasionally other application windows will stop refreshing properly, and will only sparatically update. Has anyone else encountered this? I'm on Xp Pro with 4GB and dual xeons.

View 1 Replies View Related

Photoshop :: CS6 Opacity Slider Slow Refresh - Why

Sep 22, 2013

i have photoshop cs6 64 bit , windows 7 64bit with 32gb of ram the last intel cpu , i nvida geforce gtx 760photoshop cs6 run fast outside the opacity slider , if i increase or decrease with the mouse , i have a slow refreshwithout gpu is more quickly what's wrong?i have the last nvdia drivers , i add a screenshot to let you see which slider i'm talking about

View 2 Replies View Related

Photoshop :: 13.0.2 Update / Layer Comps Refresh

Dec 11, 2012

I'm experiencing strange layer comps behaviors since Photoshop 13.0.2 update, on an existing .psd file. If some comps are correctly rendered, some others are not refreshed: layers visibility is not updated, workspace seems to be frozen, using for instance the magnifier tool to zoom in/out renders a completely white workspace, and moving then my mouse pointer above it only refreshes its lower half part (a little bit more actually). Moreover, Photoshop CPU consumption becomes quite high as long as I stay on such composition (around 50% CPU instead of 2% compared to working comps).
 
I've tried to disable GPU from Photoshop preferences, Machine is a mid-2010 17" MBP w/ i7@2.66. No problem with the same .psd file before upgrading to 13.0.2..

View 12 Replies View Related

Photoshop :: Refresh Underlying Image Of Smart Object

Jun 20, 2012

I made some basic adjustments in Lightroom and then opened the image as a smart object in Photoshop. If I decide to make more changes in Lightroom how do I tell Photoshop to 'refresh' the underlying image?

View 11 Replies View Related

Photoshop Elements :: Refresh File Watcher Organizer 11

Jan 5, 2014

I'm running Elements 11 on Windows 7.  My photo album was initially in Picasa but we imported all the photos (e.g. 13,000+) into Lightroom 4 and Elements 11.
 
Lightroom correctly imported all the files (including all images in the .picassa orignals sub-folder), while Elements only imported a subset of the files.

Elements didn't import any images in the .picassa original folder, and also omitted many folders as well as the contents of some folders.
 
Is there a file watcher 'refresh' that will reimport all the images?  I suppose I could delete the 'watched' folder from the file watcher and then re-initiate the add.However, since I don't know why files and folder were missed in the first place, I'd like to understand my options.

View 5 Replies View Related

Photoshop :: Script For CS6 That Can Open All PSD Files And Refresh All Smart Objects?

May 16, 2013

i have lets say 10 .psd's that contain smart objects. I want to ask you, is it there any script for Photshop CS6, that can open all .psd files and refresh all smart objects? (simillar to the Image Processor Script that exports .jpgs)

View 4 Replies View Related

Photoshop :: How To Disable Linked Smart-object Auto-update / Refresh

Nov 27, 2013

Working in the CC3D features, I am constantly making changes to my bump map. Every time I step-backwards, or make a significant change to the bump texture (smart object?), CC auto-saves the layer. This specific file is a very very large document (3 gigs in the bump texture layer alone), and the 3D layer has lots of lights and is very complex.

This auto-refresh/update really bogs down the time that it would take me to make my changes. I have a very fast machine (I know it's fast, I dont need to list my specs), and I have all shadows disabled.
 
How do I disable linked smart-object auto-update/refresh?

View 3 Replies View Related

Photoshop :: Redraw/refresh Problems Photoshop CS3

Feb 16, 2009

Information: I'm running an AMD Athlon64 X2 at 2.4GHz with 2GB RAM and a Radeon HD3850 videocard (512MB version, though that isn't really the issue I think) on Windows XP Home SP3, all updates applied except the ones like Windows Search etc.

All latest drivers have been installed and work fine. The machine is tweaked to run at just about 20 processes, and works very fast. Games (also newer ones) work perfectly, so I don't think it's a physical defect on the videocard in terms of artifacts). Code:

View 4 Replies View Related

Xara :: Screen Refresh Not Occurring?

May 29, 2011

Draw a rectangle, circle, or inport image.

press alt, release

use moiusewheel, mousewheel + shift, and mousewheel + ctrl

the screen blanks out and does not respond. Until you press esc, or click elsewhere on the screen.

View 9 Replies View Related

CorelDRAW X6 :: Text In Frames Very Slow To Refresh?

Mar 28, 2012

Just started with CDRX6 (Upgrade) and find a frustrating feature with text in text frames. If you import text into a frame and then move the position of the frame in the layout, the text repositions in a waterfall motion within the frame. It takes a second or two to settle down, and the frame also jumps position somewhere else en route before reaching the point you are dragging it to.  It can be moved more smoothly using the arrow keys, but that is painfully slow.

I do not have this problem with X5. Is it a symptom of some new feature in X6, or is it a fault in installation?

View 2 Replies View Related

CorelDRAW X6 :: Is There Reload Or Refresh On Linked Images?

Jun 6, 2013

I use external/linked images because the file is multipaged and as I am working continuously on it every "Save" command takes less time.

Every image is there on HDD in the same folder as CDR-file. Today I opened this file and the images look very bad - one couldn't see what is pictured there. The question is how to refresh them? I don't see such an option. 

CorelDRAW X6

View 11 Replies View Related

CorelDRAW X4 :: How To Refresh Screen After Every Change In Artwork

Oct 17, 2011

In coreldraw x4 i needed to refresh a screen (Ctrl + w) after every change in artwork.

I am using macros in corel draw.

View 5 Replies View Related

AutoCAD .NET :: Refresh Drawing After Block Modification

Nov 26, 2013

My code mirrors a selection by either the x-axis or the y-axis. It is working fine. Except, the drawing shows the result, when I move my cursor to the active dwg.

How can I refresh my drawing, direct after modification of a block? I use the code below to mirror a selected block by a button on a docking pallette:
 
private void btn_Vertical_Mirror_Click(object sender, EventArgs e){(new Modifikation()).Mirror("v");}
 
the code, which is called is:
public void Mirror(String axis = ""){//---------------------------------------------------------------------------------------------------------------------------------------Document dwg = Application.DocumentManager.MdiActiveDocument;Database db = dwg.Database;Editor edt = dwg.Editor;//---------------------------------------------------------------------------------------------------------------------------------------try{Auto
[code].......

View 6 Replies View Related

AutoCAD Architecture :: Tool Palettes Will Not Refresh?

Dec 18, 2013

When I start AutoCad and also if I try to select the Refresh icon on the Pallett, I get a pop up that says "There was an error while refreshing.  The palette could not be refreshed"  Could there be a path that is broken, if so where would it be?

View 2 Replies View Related

AutoCAD Inventor :: Vault Files Won't Refresh

Oct 2, 2013

I search for a file in Vault 2014 and find it needs refreshing i.e. the double red arrows icon in "Vault Status" column. I hit the refresh button in the ribbon and the file still has the double red arrows icon and doesn't appear to refresh.

Inventor 2014?

View 1 Replies View Related

AutoCAD Civil 3D :: Force Refresh Is Not Working?

Dec 10, 2011

I am trying  to make a simple app using .NET classes.

I made a simple Windows.Form in which are check boxes (on for each layer of the CAD drawing).

Just to set the visibility of each layer. Everything is working fine, but I have a little problem with refreshing a drawing.

Changes of visibility settings are applied  after a form is closed.

I need the drawing to be refreshed after every check box check change.

 I enclose a method with handles check boxes changes. 

private void LayerCheckedChanged(object sender, EventArgs e)
{
CheckBox s = sender as CheckBox;

[Code].....

View 6 Replies View Related

GIMP :: Unable To Refresh Patterns / Brushes

May 3, 2013

I get this error EVERY TIME I refresh patterns, brushes, Gradients etc!!!

View 2 Replies View Related

AutoCAD Inventor :: Refresh Sheet After IProperty Changes

Dec 4, 2012

is there way to refresh sheet of drawing when an iProperty is changed trough API? When I change for example revision Number, the sheet still show old number. The value is changed, because if I open the iProperty dialog, there is new value and also when iProperty dialog is close then the sheet (title block with this property) is immediately correctly updated. I know that I can use ActiveSheet.Update method, but this update whole sheet and it take long time. There nust be something better because dialog iProperty doesnot update whole sheet and it is vvery quick.

 Dim oISI As Inventor.PropertySetDim oDrw As Inventor.DrawingDocumentSet oDrw = ThisApplication.ActiveDocumentSet oISI = oDrw.PropertySets.Item("Inventor Summary Information")oISI.Item("Revision Number").Value = "test"oDrw.ActiveSheet.Update ' I would like to replace this line, this take long time

[URL]

View 3 Replies View Related

AutoCad 2D :: Refresh Memory On Ordinate Dimensioning?

Jul 26, 2012

I haven't done this in several years, and my notes are apparently incomplete. Enclosed is an image of the type of ordinate dimensioning that I want, and also my faulty notes. Maybe someone here can add the missing pieces. When I follow my notes, for some reason the UCS is displayed, whereas in the past it wasn't. I am using Version 2000 if it matters.

Notes: Tools/New UCS/Origin this yields small selection square select top right hand corner, for the zero point, then from the Tool Bar: Dimension/Ordinate, to mark the corner with zeroes.Image00256.jpg

View 1 Replies View Related

Illustrator :: Get Refresh To Work When Draw Boxes?

Jan 13, 2014

How do I get the refresh to work when I draw boxes?
 
My art work disappears when I draw a box and the stage moves.

View 5 Replies View Related

CorelDRAW X6 :: Tables Appear Blank Until Manual Screen Refresh

Apr 7, 2012

Using X6 64 bit on Windows Ultimate. Tables appear blank until a manual screen refresh?

View 4 Replies View Related

AutoCAD Inventor :: Display Randomly Freezes And Won't Refresh

Feb 8, 2011

Anyway, I just updated to the Factory Design Suite Advanced package for 2011 which, of course, includes Inventor.  I have downloaded and installed all updates, service packs and hotfixes I could find btw.  What happens is I'll be working in Inventor on a solid model of ANY size (even a single part) and with absolutely no warning, the display window will freeze up and won't refresh.  What's really weird though is that Inventor itself is not locked up.  I can click on any of the buttons or any of the items shown in the browser as though the program's running normally.  I can check the task manager and it shows Inventor to be running normally.  The memory status bar in Inventor shows lots of available memory.  I can even hover over the display window in the area where the view steering wheel is located and the icon will change appearance as though it's working normally.  I can even save the file.  If I close the file, it responds like normal and goes back to the default screen.  If I try to open ANY file after that, however, the screen will not refresh or show me the file I opened, even though everything else works fine and the program isn't frozen.  The only way to restore full function is to completely close and reopen Inventor (on average I have to do this about once an hour).  Btw, I'm also working in a local directory stored on my hard drive, not a network.

My first inkling is that it's a graphics issue but I have played with all the display settings to no avail.  I ran a diagnostic on the video card and Inventor says that I'm running an Autodesk Certified driver.  All the specs are within reason I think.

My workstation specs:

Dell Precision M4500 laptop

Intel core i7 processor, 2.67 GHz

4 GB RAM

Windows XP Professional SP3, 32-bit, running in 3 GB mode

NVIDIA Quadro FX 1800M, 1 GB graphics card (just updated the driver too...no change)

230 GB hard drive, 136 GB free space

View 5 Replies View Related

AutoCAD .NET :: Refresh Drawing When Modal Form Is Running?

Jan 3, 2012

Is it possible to refresh drawing content when modal form is running?

I placed sample project in attachment.

There is simple form with only one button.
 
Private Sub Button1_Click(sender As System.Object, e As System.EventArgs) Handles Button1.Click Class1.DrawLineOnScreen() End Sub
 
After button is pressed, application prompting user for picking 2 points, and draw a line (based on picked points).
 
Public Shared Sub DrawLineOnScreen() Dim editor As Editor = Application.DocumentManager.MdiActiveDocument.Editor Dim pFirst As PromptPointOptions = New PromptPointOptions("First point: ") Dim rFirst As PromptPointResult = editor.GetPoint(pFirst) Dim pSecond As PromptPointOptions = New PromptPointOptions("Second point: ") Dim rSecond As PromptPointResult = editor.GetPoint(pSecond) If rFirst.Status = PromptStatus.OK AndAlso rSecond.Status = PromptStatus.OK Then Dim line As Line = New Line(rFirst.Value, rSecond.Value) Dim tr As Transaction = Application.DocumentManager.MdiActiveDocument.TransactionManager.StartTransaction Using tr Dim modelSpace As BlockTableRecord = tr.GetObject(Application.DocumentManager.MdiActiveDocument.Database.CurrentSpaceId, OpenMode.ForWrite) modelSpace.AppendEntity(line) tr.AddNewlyCreatedDBObject(line, True) tr.Commit() End Using End If End Sub
 
Problem is that line had been added to transaction (to Model Space block table record) but nothing change on a drawing. Line will appear on a drawing after closing the form.

In opposite situation, without using modal form (only console) everyting works fine.
 
<CommandMethod("DrawLine", CommandFlags.Modal)> _ Public Sub DrawLine() Class1.DrawLineOnScreen() End Sub

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved