Photoshop :: Only Print One Item At A Time
May 28, 2012
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
View 5 Replies
ADVERTISEMENT
Oct 25, 2006
When I select items to copy or move it does not let you select more than one item at a time.
View 9 Replies
View Related
Oct 17, 2013
In Elements 12 is it possible to print a single item without having to go through add/remove items process? It seems to be set to print everything I have open as a default.
View 2 Replies
View Related
Dec 9, 2008
Using CS3, windows XP. Printer is an HP 3550 color. I know this could be a printer error, but it only happens when I use Photoshop. I get a PCL XL error, IllegalAttributeError. Happens at least 95% of the time, so what I resorted to doing was to format all my work in CS3, then print using my old 5.5. However, many times that will not open!
Is there some setting in PhotoShop I should check into? I checked the HP site and all the reasons for this error I seem to have covered.
View 8 Replies
View Related
Oct 9, 2012
Why is PS6 crashing every time I try to print?
View 4 Replies
View Related
Dec 25, 2012
Everything is normal until I press Print in the Print Window. Then it crashes. Every time.
View 11 Replies
View Related
Mar 27, 2006
I print most of my photos as 4x6 snapshots and keep them in folders for easy viewing. I'd like to be able to print the date in the lower, right corner similar to a photo that's been taken with a camera with a date back. I know this is sacreligious to some, but it's very convenient to have the date where it's readily visible.
View 1 Replies
View Related
Jun 12, 2012
When printing from photoshop CS5 I am unable to print more than one copy at a time. Printing one copy at a time is annoying and time consuming!!
View 1 Replies
View Related
Apr 6, 2009
In the drawing title block I would like to place a text reading the print, date and time. This should reflect the current system date and time. I would have this done on the template file so that all new drawings will have this feature builtin.
Is there a property that i can have the text to link to?
Is there any third party program for this?
C1C1
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Jan 30, 2013
Can I print all layouts in Same time. means I have 5 layouts in a file, want to print by a single command without repetation of plot command?
View 1 Replies
View Related
Oct 23, 2013
May i know how to print out many Title Block at a Time. I will like to Print out my Complete CAD Drawing, but I have all together in one Print space, so can some let know how to print them all at once with out printing them one by one.
View 8 Replies
View Related
Nov 2, 2011
Any way in AutoCAD or a 3rd party app that will send multiple sheet sets to the plotter? Even better if it is possible using 'Page Setup Overrides'.
View 3 Replies
View Related
Apr 21, 2012
I recently upgraded to PhotoshopCS5.5 and find that I can't print on my HP Photoshop Premium printer. I'm using a MacBook Pro with Mac OSX 10.6.8. I also am unable to open 2 images at the same time.
View 3 Replies
View Related
Jan 16, 2012
Ok some times when I go to run details it pops up that it can not load the component database AecDtlComponents (US).mdb file. I go to options and can not do anything there. So I have to close it all down and hope when I reload AA it works. 9 out of 10 times it does. But this is a pain to do when ever you need to add detail stuff. Oh also this happens on more then one computer in the office. running 2012 with sp and all updates on windows 7
View 8 Replies
View Related
Feb 2, 2014
I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
View 15 Replies
View Related
Mar 25, 2013
I am updating capture time based on GPS Time (a bit OCD, I know) but when I change Capture Time the Date Time Digitized value does not change. This in in LR 4.3 and is not affected by whether on not the Catalog is set to 'Write date or time changes into proprietary raw files'.
View 8 Replies
View Related
Jul 27, 2013
I have been trying to figure out if I can make capture time changes to adjust for time zone errors or the daylight saving time mistakes where the capture time in the Metadata panel is off by 1 hour or so, and then have these adjustments saved permanently to the original files (master photos). This works for JPEG files and it also works for DNG files (after converting from CR2 to DNG). But it doesn't seem to work for CR2 files directly. If I used the "Save Metadata to file" option from the Metadata menu I might just get sidecar XMP files.
Then I found this option "write date or time changes into proprietary raw files" in the Catalog Settings. This seems about right. But what does it do? I tried enabling that, created a new catalog and then imported some new CR2 files. I then changed the captured time and tried the Save Metadata to file option. It still spits out these sidecar files. It doesn't actually write this to the CR2 files.
Or does it? Perhaps I am not seeing it in Windows Explorer? Like IPTC vs. EXIF? I'm not sure Windows reads both. These are like different types or sections of metadata information about a file. So I just wonder what the benefit or consequence is of having this option enabled? Whatever it is, it is not very apparent. And as you can see from the screenshots above the capture time has not changed (not been saved) when you look at the file in Windows Explorer. Any changes are held in the XMP sidecar. Even thou I have enabled this EXIF option in Catalog Settings.
View 2 Replies
View Related
Aug 2, 2011
I note that from time to time I can't see the counter and this is quite an annoyance. When the invisible pointer hover over or passes over an object, the latter will highlight as usual. I have to close and restart the drawing each time due to this issue. Is there an explanation for it, even a solution to prevent this from happening?
NOTE : This is limited to the drawing area only. I can see the pointer in the menu/toolbar area and outside autocad but not in the drawing area.
View 3 Replies
View Related
Jan 26, 2013
I want to add a watermark to a photo which encompasses a progress time or finish time of a sports event. For example, if an event starts at 7.00 am, photos taken at 8.05 am, in the watermark I want to display 1:05 hr (or 65 mins).
View 1 Replies
View Related
Sep 25, 2008
duplicating a locked item when right-clicking to duplicate it won't work?
View 1 Replies
View Related
Nov 25, 2012
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies
View Related
Dec 8, 2005
I'm very green when it comes to imaging.
I have this image that i want to use for my website, The website is built on a predesigned template, so all the images have been made for me. However, it's a humor site, and i don't think the logo is very fitting. There's this water in the image that i want to get rid of, but i've tried to no avail.
View 6 Replies
View Related
Feb 2, 2007
I want to know if you can remove an item from a picture and it's shadow...lets say I have a picture with a vase...can I remove the vase with it's shadow from this picture to be placed in another photo...
View 1 Replies
View Related
Aug 24, 2004
In the upper left hand corner of the canvas there are two 'icons'. One is an '01' and the other looks like a tiny line graph. I can't erase them or crop them out.
View 3 Replies
View Related
Jan 6, 2013
I have a Canon S100 and just started importing photos and video into my LR 4.3 catalog. I convert RAW to DNG, and the Capture Time on the photos in LR is correct. However, the video Capture Time is shifted forward exactly 8 hours. I know how to correct the video Capture Time, but is there anything I can do to stop this from happening in the first place? I looked at what the metadata looks like in Bridge.
PHOTO:
Date Created = Correct Capture Time
Date File Modified = The time I imported the file into LR.
VIDEO:
Date Created = Capture Time + 8 hours
Date File Modified = Correct Capture Time
View 1 Replies
View Related
Apr 11, 2011
How do I control time without using the Time Configuration Dialog box?
Also on a side note; what's the difference between the Dope Sheet and the Curve Editor?
3DS Max 2011
Windows Vista 32 Bit
Dell XPS M1530
Intel Core 2 Duo CPU T5550 1.83 GHz
2 GB of Ram
View 2 Replies
View Related
Oct 9, 2012
I will add the usual caveat,I would welcome to hear viewpoints.My task is to recolour the model's top – from cream / beige to dark blue / black, but obviously I need to make sure I keep the texture.
View 4 Replies
View Related
Oct 10, 2013
I have developed a script that act on the layers individually so it would be great if I could add a new command in the layer context menu (the one that has Blending Options..., Duplicate and Delete Group, Copy,Paste and Clear Style and add or remove colors from the "eye" icon, etc...
I know that you can add the script to File/Scripts submenu but if I had access to it directly from that context menu, it would be much better. I have seen a script that adds a new top menu item to the menu bar of the ESTK so I am hopeful it can be done something similar in PS.
View 2 Replies
View Related
May 27, 2012
I am trying to create an action to create a new layer by copying the bg layer, add a layer mask to the new layer and then start the Tilt Shift filter. All works until I go Insert Menu Item and choose Blur>Tilt Shift. It just doesn't get added to the action. Other menu items do work. I'm assuming this is an oversight in the implementation of CS6?Can't see that that can be the case.
View 1 Replies
View Related
Oct 14, 2013
I've created a button with a gradient overlay, but when I click and drag the button, the gradient overlay stays put, it won't move with the button. Is there an option I'm overlooking to anchor the gradient with the item I've created? I've never seen this before. I'm on Photoshop CC 14.0 on a Mac.
View 7 Replies
View Related
Nov 11, 2007
Newbie question but couldn't seem to find the answer using the search fxn.
With the pic below, I want to have a greyscale background but have a colourful blue colour for the bunch of grapes. I am able to create the greyscale background by using:
Image > Mode > Greyscale
but I don't know how to add realistic colour to the grapes. The colour I add seem to look cartoon-like.
View 7 Replies
View Related
