I have made a map that I want to print over several pages, then I can tape the pages together. How do I get PS CS3 to do this? I can only see how to scale it to a single page, or it gets cropped. Otherwise I have to split the single image into multiple small one-page sections and print them?
View 3 RepliesI'm importing AVCHD files into my timeline in Premiere and have a files that's spanned over three MTS clips. Files originate from a Sony FS700 camera.
The files show correctly but all the material is tripled on the timeline. Files 00012.MTS, 00013.MTS, 00014.MTS are all shown on timeline repeating the same material (on camera this material is spanned throughout these files). All the material is there and all is ok, but it's just imported three times on the timeline.
I am having troubles understanding how spanning constructs work.For example if I make the shell for a 6 levels building and the levels 1-5 are identical, I should make a constructs and check the levels 1-5 in the levels dialog for that construct.
The process of displaying that construct for all the selected levels shoud be automatic or I have to manually copy the construct from level 1-5?
I am asking because in my case is not done automatic, (I might be missing something) and if I copy manually is no difference if I check the levels or not in the levels dialog for the construct.
Having problems with the spanning pipe labels in profile. Sometimes it works fine and others not at all. It will let me pick the two structures at each end and highlights the pipes, but then it will not let me pick the pipe to place the label on.
View 5 Replies View RelatedHow do I label spanning pressure pipes? I can do it in a pipe network, but not a pressure pipe network.
View 1 Replies View RelatedI was looking at placing pipe information into a Profile Band. I see that I can include the following properties in a pipe label in the profile band:
<[Total Slope Across Span(FP|P2|RN|AP|GC|UN|Sn|OF)]>
<[Number of Pipes in Span(GC|UN|Sn)]>
<[Drop Across Span(Um|P2|RN|AP|GC|UN|Sn|OF)]>
Only problem is they don't actually give me the information of a spanning pipe, only a single pipe. I see no way of choosing which pipes will be spanned. Am i missing something in the creation of the profile band that allows me to choose the spanning pipes or is this broken?
I notice issues using spanning pipe labels for the first time recently after having used them for years. The slope calculated by the spanning pipe label is completely wrong. I've attached a picture in which Labeled two pipes connected by a null structure. The two labels on the bottom are the pipes labeled individually at 3.53% and 3.34%. When labeling them as a spanning pipe, if I choose the downstream pipe first and them the upstream pipe it shows me a slope of 0.48%. If I choose the upstream pipe first, then it gives me 2.88%. Either way it's wrong.
As I was writing this I decided to check and see if the pipes were flowing the same direction (Start to End or End to Start). Turns out they weren't. After flipping one of the pipes around so that they both are laid out in the same direction (Start to End from Upstream to Downstream) the label now reads 3.37%, which is correct.
Seems like an the label should honor the flow direction of the pipe, no matter if they have been laid out in opposite directions or not.
Okay, I'm new to associative arrays, I'm attaching a drawing so you can see what I'm trying to accomplish with this. I'm doing an elevation view of a slab that has a cross section of the rebar. I've shown one of the bars spanning from left to right, represented by a rectangle, and the cross section of the bars running front to back represented by circles. You can see what I'm trying to show here. In the drawing I've attached, the top three sketches are examples of how this would look if it were working correctly.
What I'm trying to do is create an array (of circles) that will stretch to the length of the bar spanning left to right. I want the quantity of items in the array to automatically change based on the length of the bar and the spacing of items, so if there is 6" of spacing between the items instead of 12" it will automatically add twice the amount of items to fill in that space. I've been trying to use a path array, and it isn't working the way I want. I'm not familiar with rectangular arrays, so not sure what to do there either.
When I make a print from CS6 the image on paper is narrower than the stated dimension in the program. The height of the image is faithfully reproduced. I know that there must be a preference setting to correct this but I can't remember which one it is.
View 8 Replies View RelatedWas printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
I'd like to prepare and then print a 3d lenticular image.
View 4 Replies View RelatedI have someone who wants to make a six foot print of one of my images. Will a 50mb image be large enough? If not, they will need to enlarge on their end (UK). How big will they need to make it.?
View 3 Replies View RelatedWhy is my image not centered when I print? I have set everything correctly, but the end result is always an image that is pushed off the page. I thought it was my old printer, but I just got a new one, and it is happening with this one, too.
View 1 Replies View RelatedI cannot print anything from Photoshop CS5. I always get the message: Could not print “image name” because there is not enough memory (RAM).I'm using Mac OS 10.6.8, with 8 GB RAM. I have tried setting memory usage to 100% of RAM (7379 MB for me). The "Ideal Range" is 4058-5313 MB. I cannot print anything, not even a 20 kB file because I always get that error message.
(I don't have a problem printing from any other programs, like Gimp, but I want to print from Photoshop because of they way it allows you to adjust what part of the image you print when you are cropping the image during printing.)
I want to prepare my images in PS CS6 for print. I have read several articles that TIFF files print best since they do not lose any information but sometimes you can barely see the difference from a TIFF to a JPEG. However, I have also been told by a professional wedding photographer that you should always give your clients JPEGS since it is such a universal file format. I noticed on websites like CVS photo or Shutterfly they do not even accept TIFF files.
what file settings are best when printing JPEGS?I would normally save a file as the following:
- JPEG (quality 12/baseline optimized)
- 16-bit
- 300 dpi
- 3000x the longest side
- RGB color space
However, when I use the 'Image Processor' in PS to save all of my open files as JPEGs, it always saves them as 8-bit, sRGB color space. I have have a few concerns with this..
- Do JPEGs have to be 8-bit? If so, is this ok for printing? I have heard 16-bit is best.
- Shouldn't print files be RGB color space? NOT sRGB?
- Does the dpi matter?
Is there any easy way to change the auto settings when saving as a JPEG in the 'Image Processor'? Or maybe I could create an action for saving? Although, I have tried this and it never seems to work properly.
I have a photo that I'd like to print out for 16x24.
How do I do that?
I looked at the Picture Package and the largest size is 8x10.
We are an e-commerce company and wish to do a show case of our web sites in a presentation.I have been asked to make some posters and have done some screen shots. The current dpi is 72dpi, and the printers need the highest resolution possible. How can I resize to get the highest resolution possible. I tried resizing using "Image size..." to 300 dpi, then resizing back to the original 72(to see what it would look like), but when going back to 72 dpi it blurs the screen shots. what must I do?
View 1 Replies View RelatedI am using CS2. when I print with preview and choose "any" icc profile, I see an off color image. This off color image is printed off color and not what I originally had. It is approximately 1/2 to one stop density lighter (and redder) and the shadows are cyan/blue, instead of neutral black.
If I choose Adobe RGB as the profile and print, the image is close but not correct. This is happening with CS2 and elements 6.
Of course the r1800 is set for ICM and off - no color adjustment.
I have down loaded new profiles, reinstalled my epson r1800, checked for missing files in CS2.
I am running windows XP Home, 2gig memory, dell xps. I have been using this system for over two years without a problem until now.
How do I print with elements 8? while attempting to print a message state only 200 dpi of the image will print. What am I doing that is causing this to happen?
View 2 Replies View RelatedI have a jpeg of an image that I will have to increase roughly 140% for a final print size of 16"x20". I am creating the final design in InDesign, but am editing the image in Photoshop first. My question is what's the best way to increase the size of the jpeg first in Photoshop (I assume) so that when I bring it into InDesign it is maximized in terms of resolution but not so large that the file size prohibitive for sending.
I've already cropped the image, but haven't adjusted any of the sizes. The dimensions are currently: 3233 pixels x 2586 pixels, and 10.777 in x 8.62 in at 300 pixels per inch.
Do I bring it into InDesign this way or increase the document size first in Photoshop?If I increase the size in Photoshop, I assume I should resample the image. If I do, that increases the pixel dimensions and file size to over 82.4M. Is there a way to keep the 300 ppi resolution while reducing the file size?
I wish to check my understanding of embedded profiles. I will have to print out from a second machine that I will not have the ICC profile I am using installed.
You use Edit>Convert to Profile Edit>Color Settings is set to preserve profiles File>Save As is has the color management box checked with the correct profile.
When you open the file on a second machine you use Print with the following settings:Photoshop manages Color Printer Profile - If the profile is not installed on that machine will the original people appear?Disable Printers color management.Will the image print out in correct profile? What about point 6.
I have been asked to make a postcard, but the problem is I have only ever used Photoshop for web images, ie at 72 dpi.
I was wondering, what resolution do I have to use for print materials? 300 dpi?
Also, if I have an image taken from a website can I just put it in photoshop and change the resolution to 300 dpi, then use it in a print project? Is such a thing workable?
Or, do I have to use images with a starting resolution of 300 dpi?
When I open an image by double clicking on the file name, or by right-click > open in > photoshop, immediately up pops an image saying "Some Clipping May Occur" or the print dialogue in some cases.
But, if I drag the file into PS and drop it, it does not try to print it. So it seems to be something about actually "opening" a file that makes it want to print. I tried changing the file association to another program then back, but it didn't work. I'm using WinXP
i have made a poster in photoshop. when i created it i selected A4 but when i print it i am loosing alot of the image all around the border especially at the bottom.
what should i do to make it print from corner to corner and everything that i had on the page?
I have a photo which was originally approx 150mm x 90mm
I had to resize this to nearly half its original size and it looked decent. I then saved the image as a tiff and placed it in illustrator. It still looked decent in Illustrator until i printed. when it was printed it turned out a little pixelated.
Why is it that when resizing (shorter than original) images pixelate and how can i eliminate this. Also what can i do so to avoid the problem when printing in illustrator.
I mean I always replicate most artwork via vectors in illustrator but photos as you all know can only be transferred across
I take a lot of passport sized ID images (45mm high x 35mm wide). When I get them back from the lab I have to identify each image.
If I could have the image filename on the bottom of each image the identifying process can be made a lot less time consuming and of course negate the posibility of misidentifying the image.
How do you print a mirror image?
View 2 Replies View RelatedWhen I try to print a jpeg image from PE it goes to the "send fax" mode of my HP Photosmart Premium Printer/Fax/Scanner/Copy/Web. On the print screen that comes up I have two items listed i.e. fax and printer. I highlight the "printer" but it still reverts to the "send fax" mode.
View 1 Replies View RelatedWhy does the DPI change when I crop and image and then print? Can I keep the original DPI when printing somehow?
View 1 Replies View RelatedBefore Photoshop Elements 10, when setting up to print, I was able to uncheck "center" and then I could drag the image anywhere I wanted on the printing surface. Now, there is a blue box that doesn't move and the image is cut off by the bounderies if you drag it away from center. I want to be able to drag the image anywhere I want on the paper and then print, like I used to be able to. How do I do that?
View 2 Replies View RelatedI have a Mac OS X Lion 10.7.4 and Photoshop CS5.1 and have just hooked up my Epson RX580. On the window platform in another software program the multiple pages and/or poster options appear in the print window. But not in Photoshop on my mac. I have made sure to download the newest drivers etc.
View 7 Replies View Related