Photoshop :: Best Way To Increase Image Size For Print

Sep 12, 2013

I have a jpeg of an image that I will have to increase roughly 140% for a final print size of 16"x20". I am creating the final design in InDesign, but am editing the image in Photoshop first. My question is what's the best way to increase the size of the jpeg first in Photoshop (I assume) so that when I bring it into InDesign it is maximized in terms of resolution but not so large that the file size prohibitive for sending.
 
I've already cropped the image, but haven't adjusted any of the sizes. The dimensions are currently: 3233 pixels x 2586 pixels, and 10.777 in x 8.62 in at 300 pixels per inch.
 
Do I bring it into InDesign this way or increase the document size first in Photoshop?If I increase the size in Photoshop, I assume I should resample the image. If I do, that increases the pixel dimensions and file size to over 82.4M. Is there a way to keep the 300 ppi resolution while reducing the file size?

View 4 Replies


ADVERTISEMENT

Photoshop :: Image Size Increase Without Pixelated Look

Jul 3, 2006

to make a image larger without making it all pixilized?

View 1 Replies View Related

Photoshop :: How To Increase Image Size Without Losing Quality

Mar 22, 2012

I would like to enlarge an image, but when I do this it loses quality. 

This is how I have done it: image > image size > check "resample image" > select "bicubic smoother" > set my dimensions.

View 22 Replies View Related

Photoshop :: Increase Image Size And Adjust Clarity?

Jan 12, 2009

I found in image i am trying to expand to almost a 9 inch by 9 inch. When i increase the size it obviously gets extremely grainy and blurry. It is the only image i could find of this particular photo.

View 1 Replies View Related

Photoshop Elements :: Increase Size Of White Background Image

Apr 29, 2013

I have a white background image with several logos layered on it.I need to increase the size of the white background image to make room for another logo without effecting the layered logos on top.

View 2 Replies View Related

Paint.NET :: How To Increase Image Size Low MB To Between 1 - 30 MB

Aug 27, 2012

I need to increase a few images that are low MB (they vary from 2.51KB to. 4.78KB) to between 1 to 30 MB. Is this possible from this program ? How would do this?

View 2 Replies View Related

GIMP :: How To Increase Size Of Different Image

Oct 15, 2012

I got a tremendous amount of assistance from Rich 2005 about increasing the size of a particular image last week. I applied the same technique to another image with poor results. (Much loss of clarity, worsened by sharpening.) I imagine there are several ways to increase image size. Is there a way to increase this one without losing clarity?The first image is the original, the second is increased 100 percent, without sharpening.

View 2 Replies View Related

Photoshop :: How To Increase Size Of Line Drawing Image And Keep / Improve Quality

Apr 8, 2012

I have a few images that are essentially line drawings (B&W) that I want to make larger for presentation (i.e., click for larger size) on our new Website. The current size is not large enough.
 
If I increase pixel sizes, the quality is terrible. For example, see:

[URL]....on our 'test Website'.  [Please note Website is work-in-progress.]
 
Settings *jpg: Width - 270; Height - 138; Scale styles - Y; Constrain proportions - Y; Resample image - Bicubic
 
If I increase *jpg to Width - 450; Height - 230, I get UGLY.
 
When I Save for Web as *gif, I change Width - 450; Height - 230, it still appears fuzzy, although not as much.

View 4 Replies View Related

Photoshop Elements :: Transform - Unable To Increase Size Of Image From Original

Nov 4, 2012

When transforming I am unable to increase size from original .image is stretched outside box but parts of image is outwith original size and is unseen.

View 3 Replies View Related

Photoshop :: Image Size Related To Print Size

Jan 9, 2003

I'm using Photoshop 7. I create a new document 8.5 x 11 inches at 150 pixels per inch.

I draw a circle 1" from the top of the image. The circle is 3" in radius.

When I print the circle is nearly .25" smaller in radius and slightly less than 1" from the top.

Why is the output not in the same placement and proportions as the image on the screen?

View 2 Replies View Related

Photoshop :: CS5.1 - Print Size Is Not Image-size?

Mar 29, 2012

I have CS5.1 on a Macbook Pro.I have an incredibly frustrating problem.    I've seen similar questions, but not an answer that has resolved this for me. I have an image  I have sized to fit an 8.5 x 11 inch paper.  Canvas and image size all indicate my image is sized at 7.33 x 11 inches.  It is at 300 dpi.  Print size  view indicates full space is utilized on either side….BUT…
 
When I go to print, I click "scale to fit media" (which is an 8.5 x 11 paper sitting in printer)  image prints smaller  with a bar on one side.  .
When I uncheck STFM,
I get:
scale  - 92.67%,

[code]...

View 2 Replies View Related

Photoshop :: Can't Print Legal-size Image To Legal-size Paper

Oct 26, 2013

I go through a lot of sketch stages to get to a final picture, and I sometimes print on legal paper. My Brother printer does fine at that with Apple Pages, MSWord, Acrobat, and Illustrator, but with Photoshop there's a problem. I set up a legal-size image in PS, go through all the settings I can find for printing to a non-letter-format sheet, hit print, and what I get is a letter-size patch of image on a legal-size sheet. Clearly, either I am missing something or PS is missing something.

View 3 Replies View Related

Photoshop :: Image Size For Final Output Print

Jun 20, 2012

I've been asked to do a poster A2 size 594mm x 420mm 300dpi but when i enter these dimensions my pc is slowing down dramatically. whats the best way to achieve better performance?

View 7 Replies View Related

Photoshop :: Panoramic Image/canvas/print Size ?

Apr 30, 2009

I have a Epson R2880 and want to print a series of panoramic prints on it, i have set up the print to be 8x24 inches. When I open the panoramic and give it the size of the paper, CS3 automatically resizes the print, so if i set the image to 8x24 the height of the actual picture is either 8x40 or 3.78x24 .... is there a way to get a real 8x24 print or will CS3 always resize to a fixed set of dimensions ?

View 2 Replies View Related

GIMP :: Size Of Image In Print

Jun 25, 2012

When I scan an image, in this case a standard A4 size, and do modifications with Gimp I am making progress in getting a reasonably good result but when I try to print out the final image I would like it to be precisely the exact same size as the original . As it turns out the scan becomes slightly smaller than the original and when I print to A4 paper I get an ugly border. which is either a hard line paper edge or slightly contrasting color (not the pure white original border around my picture).

How to change the size of the image once my scanner puts it into Gimp so that it will correspond with the original, or even overlap by a tiny amount, to eliminate the awful edges. Do I adjust the size of the canvas or the image, or both, and if so what are the tools to use. I've tried some Gimp tools that say they adjust the size of the image but they seem to shrink it in relation to the canvas instead of expanding it. Intuitively, since the image consists of pixels, it would seem there should be a simple way to increase the spaces between all the pixels so that the image increases in size. However I'm discovering that Gimp can be quite counter intuitive.

View 1 Replies View Related

Lightroom :: 3.6 - How To Print Image At 100% Of Its Size

Jun 27, 2012

I am using lightroom 3.6 and I would like to know how to print an image at 100% of it's size for a given resolution.  In other words without any ipscaling or interpolation. 

View 8 Replies View Related

Photoshop :: Increase A Size

Apr 4, 2006

you probably heard this many times but i got a picture and would like to resize an object in the image. for example a car and i would like to make the rims bigger, how would i do that.

View 1 Replies View Related

Photoshop :: How To Take High Quality Image Taken On 5D To Print Ready PDF With 300 Dpi Without Huge File Size

Jun 16, 2013

I did a Photo shoot for some dancers who need some images for print. How do i save these images so that they are A, print ready pdf's. and B, Email able.
 
The goal is to get these images onto the page of a paper/magazine. Not full size but i guess they will be a put in a box.

View 1 Replies View Related

CorelDRAW X6 :: Image Size In Print Is Different Than In Page?

Jul 17, 2013

Haven't had this issue until today (after I installed the recent patches)

I created an image 3.004" x 2.0"

I go to print, select my plotter, select print range "selection", go to preferences>advanced, set my paper size to PostScript Custom Page Size, make my paper 3.05x2.05 for a little extra boarder.  Back in Print I set my Layout to Preposition to Center of Page which un-greys the position options and now it tells me my image size is 5.1"x2.0 and the Print Preview is showing the center of the image beginning at the left edge of the page...

Mind you, this is the same style of setup I've done numerous times per day for the past 5 years with x6 and x4...magically today it does not center my select graphic to the center of the page.  If I put the graphic in the middle of the workpage and tell it to position as in document, it is not an issue, but if the graphic is else where on the workpage, it refuses to center..

View 6 Replies View Related

GIMP :: Can't Get Image To Print At Correct Size

Mar 8, 2012

I'm a very new user to GIMP but have been using paint shop pro for quite some time - I still use version 7

Here's the situation: I received a pdf that I want to print so I imported it into gimp. It's 8.5x11 at 100dpi & two pages. So I imported it as two images (not layers) at same resolution settings. White out the unnecessary images go to print and then to printer preferences. 300 dpi is the smallest resolution on my printer so I also select 8.5x11 paper & 'sale to fit.' The resulting image is so large that approx only the top-left quarter of the doc prints.

OK, so in GIMP I go to 'Print Size' change the image resolution to 300 pixels: same result, exactly
Print size isn't it, lets try 'Scale Image' at 300 pixels. Same result again...

I tried both settings above with 'scale to fit' (printer) on & off with absolutely no changes to the printed image... very strange. Is gimp overriding my printer settings? If so how do I correct this?

Interestingly, when I re-sized the images in gimp (or thats what I thought I was doing with 'print size' & 'scale image') the size of the view-able image on the desktop in the application window did not change... the size of the window stayed the same, the zoom percentage did not change & most importantly the image did not change.

Finally, I checked if the original image prints correctly in Adobe Reader: No problem and it prints fine. Unfortunately, while I have what I need, I'm not one to give up that easily and want to know if the issue is the printer, gimp.

Why I can't get the image to print in GIMP at the correct size?

Windows XP Home SP3 - I just reformatted the hard drive last week so everything is a new clean install
Hp Officejet 4215 all-in-one
GIMP 2.4.7

View 3 Replies View Related

Lightroom :: Print Image Size In Inches?

Apr 11, 2012

Can LR 4 display the image (document) size in inches? The only metadate I can locate provides this in pixels, My current solution is to open in Photoshop then to Image-Image size-document size. .

View 2 Replies View Related

Photoshop :: How To Increase Font Size

Jun 20, 2013

How do I increase the font size for menus, icons, etc that show on the screen.  the default size is so small it is barely readable.

View 5 Replies View Related

Photoshop :: Increase A File Size?

Sep 8, 2013

I have a file that is 622kb and it has to be at least 2mb for publication. I've saved the file as the maximum quality but it's still too small.

The original was 122kb.

View 1 Replies View Related

Photoshop :: How To Increase Thumbnail Size

Jun 15, 2012

How can I increase the thumbnail size in my pictures ?

View 4 Replies View Related

Photoshop :: Increase Size Of Palettes In CS2?

Jun 28, 2013

How do I increase the size of the palettes in Photoshop CS2 ?

View 3 Replies View Related

Photoshop :: Increase Background Size

Apr 9, 2008

I want to print the photo above on canvas. I know that when I send it to my local printshop about 2 or 3 cm will be printed on the side off the frame. As you can see the butterfly is almost on the top of my photo. I want to prevent that part of the butterfly will come on the side of the frame.

View 1 Replies View Related

GIMP :: Image Size Reduced When Trying To Print Landscape?

Aug 18, 2011

I'm trying to print a landscape image but the image is reduced when printed. I open a new A4 sized template and make my image but when it comes time to print the image is smaller on the page than A4. Is there an easy solution to this? I have messed around with orientation both in GIMP and my printer settings, I have used the printers' "fit to page" setting and tried everything I can think of.

View 4 Replies View Related

Photoshop :: How To Increase Size Of Multiple Images

Aug 23, 2013

I need to enlarge about 400 pics.
 
I know you can resize trough Image processor and the Batch function. However this is only for resize to smaller?
 
I need to enlarge without loosing quality. Just like you can do with "nearest neighbour" ...

View 3 Replies View Related

Photoshop :: How To Increase Anchor Point Size In

Jan 17, 2009

Is there a way to increase the size of the anchor point and handle icons when using path/pen tool in PS 7.0?

View 4 Replies View Related

Photoshop Elements :: How To Increase Font Size On 11

Jan 12, 2014

I have been using PSE since the early days.  MY sight has limitations and I need to know if there is a way to increase font sise in program windows?  Otherwise it will be useless to me.

View 1 Replies View Related

Photoshop :: Increase DPI On Images To Achieve 300dpi To Give Clear Print

Jul 28, 2011

I have images from old photographs and drawings that I want to enlarge to A3 sent files to printers and they are only 150dpi Printer ran off 13 proofs (out of 125) for me only 6 of a quality I can just about get away with using...Is there anyway I can increase DPI on images to achieve 300dpi to give me a clear print

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved