AutoCAD Civil 3D :: How To Label Spanning Pressure Pipes
Dec 13, 2013How do I label spanning pressure pipes? I can do it in a pipe network, but not a pressure pipe network.
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: How To Add Pressure Pipes
Apr 17, 2013I've been able to publish and then import valves, flange adaptors etc. with no problem, but if I create a flanged (metric) pipe using the Content Catalog Editor and then draw the pipe in C3D it shows blank ends, no flanges. I've split the pipe in the drawing to see if that forces flanges to appear, but nothing.
Do I need to create the flanges seperately and then add them to the end of pipes?
I'm using Civil 3D 2013
AutoCAD Civil 3D :: Pressure Pipes Follow A Surface
Aug 22, 2013I am trying to create a pressure pipe network (right now I have 2 pipes) and have it follow a surface. When I click to follow surface it lowers the vertices but does not add any additional vertices to make the entire pipe network 5' below surface. My pipe lengths are set to 18' and the surface I want to use is set in my network properties.
View 4 Replies View RelatedAutoCAD Civil 3D :: Use Pressure Pipes For Force Main
Aug 27, 2013I am wanting to use pressure pipes for force main. If you do how do you add an air release manhole? I tried to use an appurtenance part as an air release manhole. If I set the plan display to use a block it skews the block. For the appurtenance part I do not see that the pipe inverts are available for the pipe label. I thought pressure pipes would be for water mains and force mains. So, I am wondering what others do for Force main Pipes?
View 3 Replies View RelatedAutoCAD Civil 3D :: Will Pressure Pipes Export To LandXML
Apr 17, 2012I have not installed 2013 yet, and was wondering if you are able to Export to LandXML. And if you can, is previous version able to import that LandXML file?
View 2 Replies View RelatedAutoCAD Civil 3D :: Pressure Pipes Compass - Only Giving Three Angles
Apr 21, 2012I have tried a thousand different scenarios with the new pressure pipes. When I create a new parts list and try to draw a water line, the compass only gives me 3 angles. This is using the "out of the box" templates.
View 5 Replies View RelatedAutoCAD Civil 3D :: Pressure Pipes - Use Size Name From Parts List As Description
Jan 28, 2013Are there any particularly logical reasons this setting is included with Pipe Networks, but not Pressure Pipe Networks?
View 5 Replies View RelatedAutoCAD Civil 3D :: Can't Label Certain Pipes / Structures
Mar 7, 2012why I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine.
View 9 Replies View RelatedAutoCAD Civil 3D :: Label Pipes / Polylines
Aug 23, 2013I received some dwg files to show existing utilities from a local municipality. I thought the files would come as shp files, but they are dwg files. The drawings/dwg files show the layout of pipes, but the pipes are polylines. The polylines have data attached to them. The properties show material, size, length, slope, etc. I am trying to label the pipes/polylines and I can't figure out how to get the information from the polylines.
View 4 Replies View RelatedAutoCAD Civil 3D :: Structure Label When There Is Mix Of Circular And Box Pipes
Mar 4, 2013In the case of a pipe network structure, where one pipe is circular (say 60") and the other pipe is box (say 5'x4'), how can you get the "connected pipes" label to reflect [size in feet X size in feet] for the box pipe and [size in inches] for the circular pipe?
I don't see how you can conditionally affect a portion of the "connected pipes" label since it's one label object.
AutoCAD Civil 3D :: Pipes - Label Entire Network Profile / Want Crossings Only
Dec 5, 2012I have pipe crossings shown in my profile. Only crossings (NO PROJECTIONS). So many elipises. I want to label them. Setting the label style at the pipe network does not work (will not override whatever label style was assigned at the pipe creation). I have accepted this (although it sucks).
Now, to get around it, I go Pipe>Add Label>Add Pipe Network Label. Label type is "Entire Network Profile". When I do this, it labels not only the crossings but all projections. So I have a million labels chilling out in space, where I have no crossing.
AutoCAD Civil 3D :: Display Order Of Connected Pipes In Structure Label
Dec 29, 2011A way to change the display order of pipes connected to the structure in a structure label? (plan and profile) Say you have a 10", 6" and 12" pipe connected to a structure, modeled in that order, so label would place them 10, 6, 12. we would like the label to display the order as 6,10, then 12 without having to drag the pipes off and then having to re-input inverts.
View 6 Replies View RelatedAutoCAD Civil 3D :: 2014 Pressure Pipe Label
Jul 26, 2013I need to add label in a pressure pipe in the profile view.
How can I do it?
Selecting a pipe and using add label doesn't work, it works in plan but not in profile.
AutoCAD Map 3D :: Hydraulic Information To Pressure Pipes?
Aug 9, 2012i am using autocad civil 3d 2013 for modelling water pipes ,unfortauntley it can't do hydraulic calculation and if you do this calculation in any other program you won't be able to visual this information in section view ,
i wonder if autocad map 3d can do this in any way
AutoCAD Civil 3D :: Spanning Pipe Labels In Profile
Dec 3, 2012Having problems with the spanning pipe labels in profile. Sometimes it works fine and others not at all. It will let me pick the two structures at each end and highlights the pipes, but then it will not let me pick the pipe to place the label on.
View 5 Replies View RelatedAutoCAD Civil 3D :: Profile Band - Spanning Pipe Labels
Mar 30, 2012I was looking at placing pipe information into a Profile Band. I see that I can include the following properties in a pipe label in the profile band:
<[Total Slope Across Span(FP|P2|RN|AP|GC|UN|Sn|OF)]>
<[Number of Pipes in Span(GC|UN|Sn)]>
<[Drop Across Span(Um|P2|RN|AP|GC|UN|Sn|OF)]>
Only problem is they don't actually give me the information of a spanning pipe, only a single pipe. I see no way of choosing which pipes will be spanned. Am i missing something in the creation of the profile band that allows me to choose the spanning pipes or is this broken?
AutoCAD Civil 3D :: Spanning Pipe Labels Calculating Incorrect Slope
Oct 30, 2013I notice issues using spanning pipe labels for the first time recently after having used them for years. The slope calculated by the spanning pipe label is completely wrong. I've attached a picture in which Labeled two pipes connected by a null structure. The two labels on the bottom are the pipes labeled individually at 3.53% and 3.34%. When labeling them as a spanning pipe, if I choose the downstream pipe first and them the upstream pipe it shows me a slope of 0.48%. If I choose the upstream pipe first, then it gives me 2.88%. Either way it's wrong.
As I was writing this I decided to check and see if the pipes were flowing the same direction (Start to End or End to Start). Turns out they weren't. After flipping one of the pipes around so that they both are laid out in the same direction (Start to End from Upstream to Downstream) the label now reads 3.37%, which is correct.
Seems like an the label should honor the flow direction of the pipe, no matter if they have been laid out in opposite directions or not.
AutoCAD Civil 3D :: Point Label Size Change When Label Is Moved?
May 8, 2012The label associated to a grading point when is moved when is moved changes its size automatically and a leader appears. After this happen no control over the grading point and its associate label. refer to the image below.
View 1 Replies View RelatedAutoCAD Civil 3D :: Changing Profile Line Label Style Causes Label String To Revert To Default
Sep 6, 2012C3D 2013. We have profile line labels, some of which get manually edited (for example, change the "<[Tangent grade(FP|P2|RN|AP|GC|UN|SD|OF)]>" to a static number such as 0.29%).
However, if you CTRL+Click and select one of these labels and change the style of that one label, then the manual edits are lost and the label reverts back to the default string.
Is there any way to turn this behavior off?
AutoCAD Civil 3D :: Edit Label Text In Parcel Label
Jan 3, 2013Is there a way to "Edit Label Text" in a Parcel area label? Similar to the way you can edit it in other styles.
View 9 Replies View RelatedAutoCAD Civil 3D :: Label Profile Label Stations As Raw
Aug 8, 2013I'm trying to label my Profile label stations as raw stations, 20~20 meters, and I'm not being able to adapt the format to STATION 0, STATION 2, without any plus zeros or +, or -, or commas, or anything, as following in the image.
Is there a easy way to do it?
AutoCAD Civil 3D :: Inner Diameter Of Pipes In SSA
Sep 30, 2013I am modelling a sewer pipe network in SSA. At some stages we use varies pipe materials with different wall thicknesses. So I want to know how can I assign inner diameter of pipes in SSA so I just deduct wall thickness from pipe diameter and then assign it to the pipe. Or is there any possibility to make a pipe list with specific properties like part builder in civil3d?
View 5 Replies View RelatedAutoCAD Civil 3D :: Breaking Pipes?
Nov 4, 2013Is there any way to split a pipe (in a non-pressure network) in two?
View 2 Replies View RelatedAutoCAD Civil 3D :: Pipes In Profile
Apr 21, 2013why when i mesure the pipe diam prependicular in profile its less than the accurat dimension of the pipe whoever i changed the profile vertical exaggeration to 1, it still wrong? when mesured virtical it is ok
View 8 Replies View RelatedAutoCAD Civil 3D :: Pipes With Box Culverts
Jul 5, 2013I have a 8'x7' Box culvert with manholes. The manhole needs to sit on top of the 8'x7' boxes. I also want to see the pipe drawn from center of manhole to center of manhole. not stop at manhole wall.
[URL]....
AutoCAD Civil 3D :: Multi Barrel Pipes
Nov 24, 2013What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
AutoCAD Civil 3D :: Crossing Pipes In Profile?
Mar 12, 2012I have two pipe networks and two profile views, one for storm and another for sanitary. I would like to show the crossing pipes on each of the profile views. When I select the profile view, add a pipe and change the style to crossing the style is change to crossing on the other profile view (ex. on sanitary profile view I set storm pipe 3 to crossing style, on the storm profile pipe 3 changes to crossing style and does not display). Isn't there a way to display the styles for pipes different in each profile view?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
AutoCAD Civil 3D :: Pipes Extending Beyond Profile?
Jun 22, 2009I have a profile with a couple of pipe networks in it. One of the pipes shown extends beyond the edge of the profile at some crazy angle. look at the picture for a better explanation.
View 5 Replies View RelatedAutoCAD Civil 3D :: Pipes Will Not Show Up In Drawing
Apr 25, 2013When I try to make a pipe network the structures are visible but the pipes are not present. I thawed all layers with no success. This is a recent development because It was working last week.
View 2 Replies View RelatedAutoCAD Civil 3D :: Drawing Pipes In Profile
Sep 17, 2013How to do profiles in Civil3D and I have created a profile from the surface utilizing a miscellaneous alignment. I have also taken one 12"RCP and made it part of a network along with the catch basin and manhole at its start and end. When I click "draw parts in profile" it places both structures and the pipe, but in reality only a portion of the pipe crosses the alignment. I'd like to only display portions of pipes that cross the alignment at a fixed width form that alignment, say 2' to each side of it.
View 9 Replies View RelatedAutoCAD Civil 3D :: Pipes Table In Excel?
May 22, 2006I have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies View Related