I have tried a thousand different scenarios with the new pressure pipes. When I create a new parts list and try to draw a water line, the compass only gives me 3 angles. This is using the "out of the box" templates.
View 5 RepliesSo I created a pvc pressure pipe to use in addition to the ductile iron pipe that comes with the software. Problem is, when I draw my pipes, the compass doesnt disply the different bends at which I can use. If I switch to the ductile iron pipe that came with the software, all my bends show up that I can draw at. Why dont they show up on the compass for my pipe I made?
View 5 Replies View RelatedI've been able to publish and then import valves, flange adaptors etc. with no problem, but if I create a flanged (metric) pipe using the Content Catalog Editor and then draw the pipe in C3D it shows blank ends, no flanges. I've split the pipe in the drawing to see if that forces flanges to appear, but nothing.
Do I need to create the flanges seperately and then add them to the end of pipes?
I'm using Civil 3D 2013
I am trying to create a pressure pipe network (right now I have 2 pipes) and have it follow a surface. When I click to follow surface it lowers the vertices but does not add any additional vertices to make the entire pipe network 5' below surface. My pipe lengths are set to 18' and the surface I want to use is set in my network properties.
View 4 Replies View RelatedHow do I label spanning pressure pipes? I can do it in a pipe network, but not a pressure pipe network.
View 1 Replies View RelatedI am wanting to use pressure pipes for force main. If you do how do you add an air release manhole? I tried to use an appurtenance part as an air release manhole. If I set the plan display to use a block it skews the block. For the appurtenance part I do not see that the pipe inverts are available for the pipe label. I thought pressure pipes would be for water mains and force mains. So, I am wondering what others do for Force main Pipes?
View 3 Replies View RelatedI have not installed 2013 yet, and was wondering if you are able to Export to LandXML. And if you can, is previous version able to import that LandXML file?
View 2 Replies View RelatedAre there any particularly logical reasons this setting is included with Pipe Networks, but not Pressure Pipe Networks?
View 5 Replies View Relatedi am using autocad civil 3d 2013 for modelling water pipes ,unfortauntley it can't do hydraulic calculation and if you do this calculation in any other program you won't be able to visual this information in section view ,
i wonder if autocad map 3d can do this in any way
I'm somewhat new to Civil 3D 2013 and have never encountered this problem before. I've got a top slope standard breakline (dark green line) and bottom slope standard breakline (light green line) with the highest elevation for the top slope at 72' and it gradually slopes down to about 54' within a 75' span. My problem, as you can see in the screen shot below, is I am getting 54'-59' elevation contours right next to a survey point with a 72' elevation whenever I hover my mouse over one of the contours. There are no nearby points with anything near 54' even outside of the surface boundary (shown in magenta).
View 2 Replies View RelatedI am using Civil 3D 2012. I am drawing a water line in a profile with a vertical scale of 1" = 10'. I am trying to draw lines at 45 deg angles to account for standard fittings.
Now, I tried to block a 45 deg angle and exaggerate the y scale, but for some reason this does not work well mathematically. Is there a way to draw lies at a certain slope, or at a certain angle from another line, while taking into consideration the scale exaggeration?
If there was any way to get deflection angles of an alignment into a table? I finally figured out how to get C3D to label them using the add note label. If this is not possible, is there a way to make a table of the notes? I am using C3D 2013 version if it makes any difference.
View 4 Replies View RelatedI am modelling a sewer pipe network in SSA. At some stages we use varies pipe materials with different wall thicknesses. So I want to know how can I assign inner diameter of pipes in SSA so I just deduct wall thickness from pipe diameter and then assign it to the pipe. Or is there any possibility to make a pipe list with specific properties like part builder in civil3d?
View 5 Replies View RelatedIs there any way to split a pipe (in a non-pressure network) in two?
View 2 Replies View Relatedwhy when i mesure the pipe diam prependicular in profile its less than the accurat dimension of the pipe whoever i changed the profile vertical exaggeration to 1, it still wrong? when mesured virtical it is ok
View 8 Replies View RelatedI have a 8'x7' Box culvert with manholes. The manhole needs to sit on top of the 8'x7' boxes. I also want to see the pipe drawn from center of manhole to center of manhole. not stop at manhole wall.
[URL]....
What the best way to draw multiple parallel pipes that cross a corridor. In my example I have a track with 4 pipes crossing the track corridor on slightly different alignments (from perpendicular to skewed). I have drawn the pipes on as individual pipes under the same network.
However I cannot get them all to display on the profile. I have tried "Draw Parts in Profile" but it seems to bring up only 1 pipe. managing multiple pipes.
I have two pipe networks and two profile views, one for storm and another for sanitary. I would like to show the crossing pipes on each of the profile views. When I select the profile view, add a pipe and change the style to crossing the style is change to crossing on the other profile view (ex. on sanitary profile view I set storm pipe 3 to crossing style, on the storm profile pipe 3 changes to crossing style and does not display). Isn't there a way to display the styles for pipes different in each profile view?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
I have a profile with a couple of pipe networks in it. One of the pipes shown extends beyond the edge of the profile at some crazy angle. look at the picture for a better explanation.
View 5 Replies View RelatedWhen I try to make a pipe network the structures are visible but the pipes are not present. I thawed all layers with no success. This is a recent development because It was working last week.
View 2 Replies View RelatedHow to do profiles in Civil3D and I have created a profile from the surface utilizing a miscellaneous alignment. I have also taken one 12"RCP and made it part of a network along with the catch basin and manhole at its start and end. When I click "draw parts in profile" it places both structures and the pipe, but in reality only a portion of the pipe crosses the alignment. I'd like to only display portions of pipes that cross the alignment at a fixed width form that alignment, say 2' to each side of it.
View 9 Replies View RelatedI have a number of tables which have all properties about the pipe network with the cooridnates and upstream/ downstream info. Can it import to C3D and automatically generate the pipe to 3D?
View 9 Replies View RelatedI'm a bit of a Civil 3D newbie. I've got a project that involves addition of storm drain to existing storm pipes. I'd like to be able to use Civil 3D to include existing and proposed pipes in the networks, but be able to show existing pipes differently than proposed pipes on plans and profiles, i.e. screened. I can't seem to figure out a way to do this--I can effect changes to all networks, but not invididual pipes.
View 9 Replies View RelatedIs there a way (and I'm just missing it) to have a pipe from a pipe network only be shown 'cut-off', with the typical 'cut-off' shown on the profile view? see the screen shot of sketch of what I'm referring to.
View 2 Replies View Relatedwhy I can't label certain pipes/structures? I can select the pipe or structure, rt click, add label and I get nothing. The layer is on cause I can see other labels. I also get the same result when I go to annotation, pipe label. This only happenes to certain pipes or structure, others in the same network label fine.
View 9 Replies View RelatedI received some dwg files to show existing utilities from a local municipality. I thought the files would come as shp files, but they are dwg files. The drawings/dwg files show the layout of pipes, but the pipes are polylines. The polylines have data attached to them. The properties show material, size, length, slope, etc. I am trying to label the pipes/polylines and I can't figure out how to get the information from the polylines.
View 4 Replies View RelatedBack in 2010, I created several optional properties in pipes for labeling purposes.
The file I modified is: AeccPartParamCfg.xml
I have migrated this file to 2011, 2012, 2013 without any issue. In 2014, I am getting a run time error for one of the optional properties and therefore that option is no longer working.
Created optional properties and run into problems in 2014? Works fine in all my previous releases of Civil 3D using the same parameter file.
Attached is the Parameter file and error at start up.
I have an alignment for a proposed steel gas pipeline that is several thousand feet long. The alignment is stationed and set to display PI symbols (triangle) at each change of direction. However, steel pipe is relatively flexible so small changes in direction (a few degrees) are irrelevant and I do not want the PI symbols to display in those areas. Is there a setting (a tolerance so-to-speak) in Civil 3D to edit when PI symbols are displayed for an alignment. For example, I want to set it such that PI symbols are not displayed unless the alignment changes direction by more than 10 degrees at a given PI.
View 9 Replies View RelatedIn order to have a data band at the bottom of my profile label the station and invert of my sewer pipe I just created a profile along the pipe and then have a data band in my profile that labels that profile. I have that profile style set to not plot so this way I can leave it on all the time. This is all fine and well. I have labels every 100' that label the station and invert elevation but at times I want to label miscellaneous locations along my pipe such as a bend or something. How do I add an addition data band label to achieve this? Everything I have found only lets me have these labels at a specified increment set in the band style.
View 2 Replies View RelatedHow can I access the hydraulic data from pipes through VBA? Is it possible? I couldn't find this information in the pipes object...
Using Building Design Suite Ultimate 2014
I have been unable to attach two pipes to a headwall. Tried to make the headwall wide enough but each pipe still overlapped. My current work around is to use two headwalls. Is there a way to get the double pipes with a single headwall? or am I stuck with two headwalls.
View 5 Replies View Related