I've got Photoshop but I don't know how to use it, and I love to see all the graphics people create and want to see if I can produce anything myself...I basically know how to open an image file, that's it
So what is the best way to learn Photoshop? Is there a book(s), a Bible, that everyone uses, or some other method?
How can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies View RelatedPhotoshop starts as normal. When I do File>Open or File>New nothing happens. [URL]
I've uninstalled, deleted all AppData and ProgramFiles folders, installed, updated. Still no luck. Version 12.0.4 x64.I've removed all printers.I've done the preferences reset trick by holding down CTRL+ALT+SHIFT when launching Photoshop.I've done the super weird ESC and CTRL+SHIFT+S described in the last link above (sounds like nonsense!). Photoshop was working fine on this same computer earlier, but one day decided to stop working.Can't even access the Adobe Chat support for CS5 even though I paid them a lot for this currently 100% useless software.
I'm running Windows 7 X64, fully updated.Photoshop CS5 (12.0.4 x64). Freshly installed.
My Windows 7 and Photoshop Elements 10 will not open image CD's downloaded from another Photoshop file. Could open them in a previosu Windows XP and older Photoshop. Now get message: "This file does not have a program associated with it for performing action. Please install a program or, if one is already installed, create an association in the Default Program default control panel."There are hundreds of asscociation files listed.
View 1 Replies View RelatedI have CS2.I have created a series of layers that I would like to animate. At this point all of these layers are in the form of a psd file within CS2. How can I open this psd file in ImageReady and have access to all of the layers.
When I try it now, I end up only seeing one layer in ImageReady.
How to set image size/resolution when opening a raw file in pse 11 editor? win 7 pro; pse 11 settings: edit>preferences>print resolution = 337.596, screen resolution 109 dpi( 27 inch, dell U 2711). Originally print resoltuion was set to 240 dpi but was changed in case this was causeing a problem. CRAW v 7.4.0.137 Camera alpha 65, image size is: 6000x3376 dpi; (83.33x46.88 inch) Problem is: Currently when I edit a RAW file in CRAW and then open in pse editor image size is: 6000x3376 px; 25x14.667 inches at 240 dpi ( by ration this corresponds to:17.773x10 inch at 337.6 dpi)
I am trying to change settings so the raw file opens as: 17.776x10 and anywhere from240 to 337.6 dpi whatever works or is esiest to set.
My settings are for use in creating blue ray dvd movies and with cropping and editing printing high quality pictures for family.
Under Windows XP I've installed Photoshop CS2 and CS6 simultaneously, therefore two programs with the same name exist:
...Photoshop CS2photoshop.exe
...Photoshop CS6photoshop.exe
By double click I want to open a *.TIF image by Photoshop CS2 (for certain reasons). I know how to assign an execution program to a file type in Windows XP. Whatever I do – pointing to the CS2 version – the operating system reverts always to the CS6 version. The same problem for In Design and Illustrator.
I have Windows XP/Pro with SP3. In File Options > File Types I have JPG set to open up in Photoshop CS4; alas, when JPG files are either in Outlook as attachments or on the desktop, nothing happens when I double click them. My workaround is to drag the file icon into CS4, and this only works from the desktop, not from Outlook.
View 2 Replies View RelatedThere's probably a simple explanation, but if I have a file open for a long time in Photoshop the blacks will start to appear oversaturated/blocked up. If I close and reopen file it looks normal again.
I am using OS X Lion, Photoshop 5, Apple 30" Cinema display. My monitor is calibrated with a i1 Display by X-Rite and resets according to amibent light.
For printing or mailing purpose, i used to re-open big .psb layer files (2-6GB) in cs5 and cs6 with keybombo "alt" and "shift" while double clicking the document in the finder window (10.6 + 10.7.5), in order to save time.
This is not possible anymore, everytime i open a document this way its white and empty in photoshop.
Is it possible to open a disc image file to see what is on it, or can it only be used for burning a DVD
View 4 Replies View RelatedI am trying to open this image [URL] ... that I downloaded the full sized image and it doesn't matter how many times I download it or open it in Gimp it shows up in Gimp corrupt and gives me the error "premature end of jpeg file" but Windows Photo Viewer views the image just fine! what is wrong when I open it in Gimp???
View 3 Replies View RelatedI am trying to open an .AI file, and am having almost success. Instead of loading the whole image, it cuts off about 50% of the image, leaving just the center. I altered the rendering width and height in the Import from PostScript window and it successfully extended the image to include the right side, but the left is still truncated. How can I get this whole image to open?
I can resort to just mirroring the left and right sides to fill in the blanks, but I would really rather not do that if it is possible.
I am running Windows 7 64-bit, with Gimp ver 2.6.11
See attached file.
The preview file shows the correct contents of this file but once opened it seems that the file contents is from an earlier saved version?
Is there any way to recover the file that is shown in the preview file dialog box?
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
View 6 Replies View RelatedI’m a 3DS Max transfer. In 3DS Max there is an option to open an image file for modeling reference in a separate window within Max which always stays on top. This is NOT an image plane to model off of but an IMAGE FILE, a picture i can get the details from that don’t show in a drawing or plane. Currently I open images or groups of images(NOT SEQUENCES) in the default OS file viewer program. This is fine with a dual monitor setup, where I throw the reference images to the other screen. But what about when I’m on my laptop on the go or have no other monitor? Currently I’d have to open the same program, have it underneath MAYA and flip back and forth, which is a very big hassle over time. I’d like to be able to open a small, resizable window WITHIN maya and view the image file(or files!) there so I can move it around my workspace and glance over to it in an instant.
I still want my four panels or all of my panel space to work with. With it being resizable i can even shrink it down to get the gist in the upper right corner where no icons are even zoom in on parts with such a small window.
When I start a new document or open a file in Inventor, I get a pop up saying: "Cannot read texture image C:UseerspublicDocumentsAutodeskInventor 2011TexturesChrome.dds" I moved the whole Autodesk file and changed all paths under settings>files in Inventor. The new path to Chrome.dds is C:UsersKajDocumentsAutodeskInventor 2011TexturesChrome.dds
View 3 Replies View RelatedI use Autocad since version 2.0. My THUMBSAVE value is 1.Still not showing a preview of the dwg.
View 9 Replies View RelatedWindows Explorer set to open image files with PSE11, but when I double click on image in WE it launches PSE11, but I then need to click on Open tab in PSE11 to get it into work window. PSE10 did not have this problem
View 1 Replies View RelatedMy CS6 open on blank screen only, cant open with image (at les it is hiding behind something on known to me ). Image open OK in Bridge Raw. I did reload CS6, from my CD, but same thing.
View 1 Replies View RelatedI am unable to open files from the file "OPEN". I can open from Bridge or open recent document, but not from just File, Open.
My operating system is Mac OS X.
using element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedIn Elements 3 I could clone parts of one open image to another image. How do I do this in Elements 11?
View 2 Replies View RelatedWhen I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
View 4 Replies View RelatedI am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
View 2 Replies View RelatedIn Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedI am able to run CS6 when I login Admin, so i change scratch file location to D:. After restarting PC, login by Admin, I can run CS6. But I still can't run CS6 when I login by other account, I think the location of scratch file is per user setting.
View 3 Replies View Relatedmy setup has 128gb ssd (C) which contains only my OS files with some junction points to Program Files/Program Files(x86)/ProgramData/Users which are located in my D drive which is a 1TB WD.
at first it showed when I tried to start PS for the first time after a clean install on a new computer I managed to get past it by runing PS as admin and changing the scratch disk to D.but now I noticed that when I try to copy a path from illustrator into photoshop as either a smart object or as pixels I get this error again. I haven't seen it again other then that but I just started using PS in this setup so I am yet to explore all the functions and whether they are working correctly or not.
when ran as an administrator the illustrator->PS transfer works fine but I don't want to run PS as admin all the time...
When I from Photoshop CS6 chose to open a file, or "Place" the browser window open, but I have to scroll all the way down in the "Enable:" drop down menu to chose "All Documents" or "All readable Documents" each time. And then if I want chose from the "Format" menu.
This is very time consuming, and I don't find any settings to make i.e. "All Documents" as default.