I have CS2.I have created a series of layers that I would like to animate. At this point all of these layers are in the form of a psd file within CS2. How can I open this psd file in ImageReady and have access to all of the layers.
When I try it now, I end up only seeing one layer in ImageReady.
I'm trying to open an animated gif into Image Ready from PS but can't seem to get past square one.
I've done this before but quite awhile ago and my memory is not helping me. When I open the gif file in Image Ready it only shows one frame instead of a stack of frames.
I have ps 7 with image ready. Whenever I try to open a file in image ready I get the following error message.
"Could not complete this operation becuase an assertion has failed."
If I open the file in PS first and then switch to Image ready it will work but then I egt the same error message when trying to save it.
I have re-installed ps but still no luck.
I have been working on a document that i had made a long time ago, i have updated it and changed the scale and moved different images and deleted layers and so on, this is all fine in photoshop, see below image:
But when i move the file across into image ready, somehow image ready remembers the previous state of the image and brings in the old rollovers and old layers that correspond with those rollovers, see below image:
My question is, without having to spend ages in image ready tidying up the position of layers and deleting images, and basically doing all of the things i originally did qwith the image, how do i get image ready to open my photoshop document as i have it in photoshop, bear in mind i have deleted all of the slices in the document.
I did a Photo shoot for some dancers who need some images for print. How do i save these images so that they are A, print ready pdf's. and B, Email able.
The goal is to get these images onto the page of a paper/magazine. Not full size but i guess they will be a put in a box.
I'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
I'm using Gimp 2.8.6.Try as I might, I'm still trying to figure out how to effectively 'merge' 3 shots of the same scene taken at 3 different exposures (using the exposure bracketing feature on my camera).The idea is to end up with the equivalent of an HDR image.
I assume that I open the first image and then open the other two as layers . .
i used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies View RelatedI've heard a rumor that I can select an area of an image and make it into a link. I've tried to to select an area with the marquee tool and then I click on the little orange feather in the lower right of the tool box. I've tried to paste my desired URL into the web link field but I can never get it to work. Can this really be done? How does an image with a link get saved? Jpeg?
View 3 Replies View RelatedI'm trying to achieve an avatar similar to this
using this as the background image.
and using this as the gif at the bottom.
how I could achieve this in image ready 7? I tried dragging the gif onto the image but it only drags one layer.
try to open a document with Image Ready, or save my new web-version image after jumping from Photoshop to Image Ready, I get an error message:
"Could not complete this operation because an assertion has failed."
Just what in the blue blazes does that mean,
Normally, when I collect a bug somewhere and Photoshop starts getting glitchy I just reinstall it, but that doesn't work. I really need to use Image Ready!
I am using a PC with Wxp pro (service pack 2+), and Photoshop 7.0.
Just started usin it. Its not being very useful because of one thing.. How do you make it so that when you duplicate a frame, then go to edit the first one, whatever changes are made to the first frame don't go to the 2nd? don't really no how better to say it.
View 2 Replies View Relatedhow can I get it moving in image ready... tha some things in it change slowly
(like a cirkle to a square) but then in this image
image-ready doesnt work anymore:
how to uninstall and reinstall?
I ve just finished an animated pic with test scrolling across the screen , now i would like to save or do what ever i need to do so i can upload it to an host website for viewing, but evertime i try to optimise it then save i cannot upload it, or when i do save it to computer it opens only as a imiage, no animation,
View 1 Replies View RelatedHas Image Ready been integrated with Photoshop CS3?
View 3 Replies View RelatedHow do I use them, I heard they were used to seperate animations.
View 1 Replies View RelatedI have a very basic question; how do I create an animated gif in image ready using 2 or more images. I create what I want using the first image and when I select the second image it starts a new animation. I am trying to create an animation using 9 images that will dissolve from one to the other.
As a follow up, I found a tutorial that says open 2 photos in PS and drag one onto the other to form 2 layers each with a different photo. When I go to drag the one onto the other it makes the photo I'm dragging the active one. How do I open 2 photos, or more?
in slicing using Image Ready, i cab get the optmization done perfectly, but when i open it using FrontPage and try to edit the " empty space " -which is in the middle - in my case, i got all the images on the sides falling apart !!
is it better to do it using dream weaver !
When the mouse is moved over the link I get image boxes opening above and below the link but with no image in them. I have also noticed that Image ready has imported many of the graphics files with names such as Index_7-Index_14_over.gif so the file is not only the slice for Index 7 but the over gif as well. Im not sure what I am doing wrong but here is the page to show what I mean. I have redone the slices and rollover effects three times but still cannot..
View 4 Replies View RelatedI got the slices and everything done including the rollover effect but I have 2 questions. On the rollover effect options, it asks for URL, Target, Message Text, and Alt Tag. What does Target and Message Text mean? My 2nd question.....How do I get that I-Face on my website after saving it as an HTML file?
View 4 Replies View RelatedI thought someone might be interested in a web page I just finished. I wanted to embed a video within a picture so this is what I did: The background was sliced using image ready and a small video was inserted in the appropriate cell. The tricky part was to encode the video to be the same size as the sliced cell.
View 6 Replies View Relatedi cant seem to figure out how to save an animation as a gif..
View 3 Replies View RelatedI've almost never used Image Ready so I'm pretty much lost at sea here. I've read the help files but can't find my problem addressed. I have two images, each in a layer, and I want to fade from one to the other and back again.
In Image Ready I created frames from layers, then duped frame #1 to frame#3. Then I tweened the transitions frames. Looks great in the animation palette. Looks good when I play the animation in Image Ready.
When I export to SWF format and play the file in my browser, the initial image and final image are good, but the middle image has gone almost entirely dark. I can see just enough of the outlines to know it's the correct image, but have no idea what I'm doing wrong.
I'm trying to create an animated image, but when I choose the option "jump to Image Ready", I get the following message: Could not fully start the application because a program error has occurred. However, the last time I tried to move to Image Ready (I haven't done so often; I don't use either Photoshop or IR very often),
View 1 Replies View RelatedI just made an animation in image ready, but it won't let me save it as a .gif file?
View 3 Replies View Relatedi have one gif animation. And one plain old pcture. How do I transfer the animation to the picture? And still be animated?
View 1 Replies View Relatedrollovers made with Image Ready.
I have created a image map with rollovers included. I saved the PSD and optimized the image for web and it created the image and html data. All hot spots are working and the rollovers work well too.
The problem I am having is that everytime I open the page containing the image map / rollovers I get a pop up bar at the top of my screen indicating that the data or content on the page is potentialy harmeful.
Why is this? When I visit other sites the rollovers work without a problem and no warnings. Why is this only with my image ready created images and scripts? I really do not want my users to have to have this pop up each time as it is a pain and it may scare some users away and it will screw up my links and images apperance if the pop up bar is not set to always allow.
Does CS3 Include Image Ready?
View 5 Replies View RelatedI'm trying to put together a site for my wedding and ran into a snag. I made three slices in Image Ready 1 for the banner 2 for the NavBar and 3 for my Text, Links and Pics. The problem is that the third slice is a .gif file and I was wondering how to go about making this HTML.
View 6 Replies View RelatedI have some kind of colorful background.
How can I make a slice from the background which I'll define it as No-Image (which means I can write on it) and the colorful background will be kept and not be turned into a single background color?