like to make a head shorter vertically, and position it so that it is not on a tilt.
is there a way o make it shorter besides free transform?
i dont know how to use the ruler guideline to reposition the head.
Suddenly Images showed much shorter than from Camera.With Canon 50d , took some garments and it looks fine from camera.But when I see from Bridge and Photoshop, images look shorter.
View 8 Replies View RelatedHave you ever wanted to make a photo seem to have shorter depth of field? Prior to Photoshop CS6 this was no small feat to achieve digitally and end up with a pleasing and visually believable result.
Photographers know that setting the aperture wide can change the mood of a shot completely. Sometimes getting the DOF just right can make the difference between an "also ran snapshot" and an award winning photograph.
With today's smaller digital sensors - and even with big sensors if too small an aperture is available - sometimes we get an image that's exposed right, that's composed well, that's caught the moment. More of it is sharp than we'd like, and the background or foreground is simply distracting.
Enter the new Photoshop CS6 blur filters.With the Tilt-Shift variant, one can progressively blur pixels based on a definable gradient/mask, so that we get that familiar progressive front-to-back blur change.
Armed with this powerful new capability, and with the subject masking/separation facilities we've had for a couple of versions now, this becomes possible:
1. Separate subject from surroundings with a good mask - e.g., quick select, refine edge, make a new layer with just the parts you want to remain sharp showing on it. A good mask isn't difficult to make any more! Hide this layer when done.
2. Remove the subject, at least around the edges, from the background layer underneath, e.g., by selecting using the above mask, expanding the selection, and doing Content Aware Fill and/or Cloning. This is important because in the subsequent blur operation we don't want parts of the sharp subject blurring into the background. That just looks weird.
3. Use Photoshop CS6's Tilt-Shift Blur to visually shorten the DOF in the background layer, with the center point and unblurred region set to coincide with the position of the subject in the shot. Adjust the settings to taste, which isn't as much of a crap shoot any more since the blurs actually update in real time on screen.
4. Make the layer above visible, maybe do some things with the lighting (which is fairly easy, now that subject is separated from the background), and voila, a whole new feel to the photo.
Is there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View RelatedI want to make one shorter animation loop within a longer one. Example would be a rotor of a plane spinning when the plane flies by, or a parameter of a material looping within lets say 15 frames (e.g. UV offset changing in cycles) while the whole walk cycle is 60 frames long. If it is a simple property that has to be changed I could simply key in a multiplied value (in the previous example I could offset the UV by 4.0 so it would loop 4 times) but this wont be a solution for more complex stuff.
View 1 Replies View RelatedYears ago someone at our firm created his own dimension tick block because he didn't like how thin AutoCAD's built-in tick was. I would agree with him, but I've found using our own tick block creates these really odd additional lines along the dimension line when at smaller dimensions -- I have a feeling the lines are inserted for some reason when the dimension text gets too close to the extension lines. In the following image and in the enclosed DWG, you can see what I mean:
At the bottom left is the tick block on its own. Above that a typical dimension, which looks fine. To the right of that you see the additional length added to the dimension line. And then the next 2 just show some more examples: the lines disappear when I go to 3'-2" but reappear at 2'-11" which is what led me to believe it was due to the proximity of the text to the lines.
Above all that I exploded a dimension and moved the components away from each other: there is a line added to the end of the block and that line does not show up at all in the 3'-3" dimension.
how to suppress these and why they are added in only when the text gets close to the linework?
Edit: the picture I originally attached was missing the exploded block -- replaced with a better image here. db
Is there any utilities that can select the entire drawing with the 2d polyline and erase all the polyline less than specify length (eg:10m,20m etc) ?
View 4 Replies View RelatedI was checking out the CS6 product page, especially wanting to see the uprgrade pricing (I currently own CS4 Design Premium full suite). I had not really investigated the Creative Cloud thing before, so I went through the FAQs. I'm still not sure if I want to go that route, or stick with the perpetual license thing.
You are assured of always having the most up-to-date versions, and can add any app at any time. I currently use Photoshop and Illustrator way more than the rest of the apps in my suite, but it is nice the rest are there when I need them. Who knows, I might really get into Premeir Pro or Audition.
The Cloud basically offers everything in the CS Master Collection. The question is, "Is it a good value (for me) (or you)?" It seems it's a better deal the more apps you use. In my case, comparing the cost of an upgrade to the Master Collection (which I likely wouldn't buy otherwise) would give me 2 3/4 years of the funtionality for the same price. Pretty good, even considering Adobe's new 24-month release cycle.
But compared with the Web and Design Premium upgrade, which would be the version I probably would buy, it drops down to less than two years functionality. But, I would gain the ability to add apps as my needs may change.The fact that you have to keep on paying to continue to use it is a definite turn-off, but not that much worse than the new one-version-back upgrade policy.
So, I have more thinking to do before I make up my mind. I would like to hear thoughts from those who have decided, particularly from those who have decided to get Cloudy. What were the main things that led you to that decision? Or against it?
If I paste a person's head onto another person's body how can I blend the skin colours together to make the effect look seamless?
View 7 Replies View Relatedhow can i do sth like that???For example put my head on Schwarzenegger's body(...)and make it look realistic.
View 2 Replies View Relatedhow to edit images of people like for example cuttin the head in photoshop and replacing it with other people's head and i wana make it look as realistic as possible .. like blending to the real picture ...
View 3 Replies View RelatedI'm trying to blend my head in with this picture and I can't get it to blend well.
View 1 Replies View Relatedi wanna put my head on a diff body?
View 1 Replies View RelatedI have a photo of a puppy, where just the top of the head where the hair is, is cut off - out of the camera shot. When using the quick selection tool and placing this image on a new background, the top therefore has a flat line at top. Which is the best feature to try to replace what was cut off in that original photo (shown below) ? Would that be the content aware patch tool? Or would you just use the paintbrush to try to paint it in? With all the subtle colors, that is difficult.
View 2 Replies View RelatedHow can I move ex a head from a picture to another picture?
View 2 Replies View RelatedOk so I have a family photo. Able to now move the heads around by creating separate layers for each. Just trying to figure out to do with the "white" areas that are left behind due to the varying sizes of the heads. So when I switch the head I have all this extra white space left behind from the prior head. What tool is best to cover up the white area with say the background behind the head ? Clone stamp doesn't seem to work inside the white area.
View 2 Replies View RelatedI just bought photoshop CS3. I have been working with Adobe Photo Deluxe 4.0. I know how to use that software, but I am completely lost in Photoshop. I'm trying to bring up two differet pictures. I want to crop out the head of someone in one picture, and place it on the body of my second picture. I know how to do it in Adobe Photo Deluxe 4.0, but I am completely lost on how to do it in PhotoShop.
View 1 Replies View Relatedin this photo a head is tilted to the left.
How can i make it so the head is straight onthe body..
i know there is a wy to do this with the control r "ruler" command but i dont know how to do it..or the "scale" command.
by putting her head on another body.
usually i can do this fine, but the neck and body part and face skintones are different and i cant match them. also the view of the face is at an angle. is there away i can make the face, look at the camera more? feel free to copy image and edit.
I have a client who wants me to make them look like a bobble head doll for an xmas gag.
I have everything figured out but how to make the base the bobbleheads are mounted on.
I plan on doing this in ps 7.
I want to have some fun and take a pic of my friends face and put it on someone else's body.
View 3 Replies View RelatedTo take a persons face from one picture and overlay it on another persons head.
View 4 Replies View RelatedAfter I go through the Highlighting motions -- and fill -- then punch OK, why does the shadow not disappear?(PhotoShop 6.0)
View 2 Replies View RelatedI am using Photoshop CS5 Extended ver.12.0.4x32. I wanted to know what is the easiest way and what feature of Photoshop will cover bald head with hair.
What I am doing is there is this picture of person who has hair in some portion of his head and I am trying to cover the bald areas of that person with hair. How can I do that ?
How do you replace a persons head on a photo?
View 1 Replies View RelatedI have imported a photo of myself onto paint, is it possible to cut out the shape of my head. I have tried with other programs and I can manage this only in rectangulat form. ie, head cut out on white rectangular backround.
View 2 Replies View RelatedI am trying to replace the head from one photo with the head from another. I was able to remove the background of the top head using the lasso, but when I create a layer and bring it to my background pic, there is a white area around it. I have tried Grim Color Reaper, but it is wiping out part of the pic I'm overlaying. I think this is due to the fact that the pic has some off-white and the background is now white and they are being read the same. I've also tried the Magic Wand, but seem to have the same issue.
View 1 Replies View RelatedI am using AutoCAD 2012 and I noticed that the dish/dome command is gone. How do I make a dish?
View 9 Replies View RelatedI am a student of Interactive media and my latest project requires me to build a character model in 3DS.
I am currently tryingt o texture the head of the mode with the use of a bitmap. When I add this to the materials editor the bitmap appears. If I then add this material onto the model the whole model turns grey. But when I come to render the model the bitmap appears on the model.
How can I add the texture from the materials editor ont the model and it too appear on the model for me to use a UVW map?
trying to draw a hex nut in isometric...I've got the ellipse with the inside/outside dimensions but as far as placing the lines and connecting them to make the hexagon perimeter I keep coming up wrong..
View 3 Replies View RelatedHow to make it look like an animals head has been wrapped in spider web. This is what I have so in my image, but where to start with something like this! Ideally I'll have the spider sort of hoisting a head up to his web. [URL] ........
View 1 Replies View Related