Just downloaded from adobe the help centre zip with the following insructions:
1. Exit photoshop
2. Copy zip to AdobeAdobe helpcentreAdobe helpdatapackages
3.launch Adobe Helpcentre.exe. in Adobe helpcentreAHC.exe.
4. Exit Aobe Help Centre.
The above instructions are very clear.The problem is: I cannot find any Adobe Help centre file.I have searched throuout the Adobe system without success.
Ok I have been trying to figure this out for about half an hour now and its getting me mad because I can't do it.
I have an object on a layer and I want it aligned to the centre of the canvas how the hell can this be achieved I have tried everything surely there must be an option to align it?
If one drags a layer from one image to another while holding shift, the layer will be placed in the center of the canvas it's dragged to. What I want to do is just move a layer to the exact center of the canvas. I have in the past, when deperate, done so by moving it to a different image and then back while holding shift.
View 1 Replies View RelatedThe DVD is a music DVD and thus I have text for each song name in the chapter list. I have created each song title on a different layer, but wish to align each of those texts in a position that is central (horizontally) on the page. Is there a quick way to do this?
View 3 Replies View RelatedNot sure if this is possible, maybe with some maths? So possibly via applescript.
I have a layer that is this is neck piece that you see, and you can see that the extension change makes the centre, 'off centre' or at least visually?
How might I achieve this?
I need to expand the canvas afterwards to create a border where the image is framed correctly as part of an automation.
Is there a way to zoom out without being panned towards the centre? I'm working on the corner of an image and occasionally zoom out to see it in context but the view flies towards the centre so I have to pan back again.
View 5 Replies View RelatedUsing Elements 8. The cursor for Clone Stamp freaquently appears as a cross with a dot in the centre rather that the circle. what is (am I doing) wrong?
View 1 Replies View RelatedI managed to move the home screen on my Mac to the left but now it will not return to centre, so that I can access the controls. A two fingered drag does not seem to work.
View 2 Replies View RelatedIs it possible to move an object by its centre and not the default origin of BLH corner?
I'm a CAD designer and I use XDP7 to accuratly register graphics to frontplates, but the current method of calculating the offset for each object is very tedious.
The selector tool info bar has a 9 square grid that a pop up says "Set Orign Position" but sadly this is for rotating only. It would be useful to toggle to colour of these squares to set both.
I know that XDP7 "knows" the centre of an object as the "Arrange" function uses it, but what I want to do is set an object origin to the centre and to be able to use the X Y "Position of Selection" numbers to move it.
My current task:
1. I have two lines, they represent a winding footpath of varying width, I would like to create a centre line between the two (not just eyeball it in)
2. I would like the centre line to be graduated every 5m, with parallel lines that join/cross the shoulder lines
If the first task proves to difficult don't worry about it, I just need to know how to graduate the lines.
I thought of using the divide tool, but it divides the line into equal segments, can I nominate how long those segments are
when I create a pattern using the new pattern maker and I apply it to say a rectangle, how can I make sure that the pattern is centred? For example I have a chevron pattern that I want to fill a rectangle, but I want to make sure that the chevron pattern is dead centre.
View 7 Replies View RelatedI want to do the centre akignment of text fiit to path. when i m selecting the text , the alignment is already showing the left aklign as default. it dosent work.
View 6 Replies View RelatedAll options relating to the content centre seem to have disappeared. When i try and add a structural shape via manage tab / author - I get the following message Structural Shape Library cannot be found or Content Centre isnt logged in, please check it and try again. i have checked the active project and it includes the content centre location. Also in an Assembly I do not have the option of placing from content centre.
View 2 Replies View RelatedWe have just updated to Inventor 2013 (from 12) and none of our models which contain BSi libraries are working. I understand BSi is within 'Other' CC library.
I have tried copying the idcl files from 2012 CC libraries into into 2013 but Inventor 2013 is not recognizing them. Within the 'update libraries' dialogue box the are listed in red and 'not available'
I've been floundering around for a few days now trying various fixes from the net without success.
For a while now whenever I open a new assembly the default is place from content centre, I use the drop-down and select place.
Today I needed place from content centre and it just doesn't come up.
It is loaded/automatic in the addins.
If I open my projects, in the bottom right corner where I would usually click to acess my installed libraries, I click but it does nothing!
I also noticed studio and BIM are greyed out, but I have started to play with Showcase so not really a problem. I need to set up a read/write library soon, so it's going to be a problem.
I'm using illustrator (CS6) to animate a simple marionette type figure.
I'm using the Rotation tool to turn body parts around their usual connection points, moving the transform centre point each time. I'm wondering if it's possible to "lock" the centre point for any individual object to a certain offset from the object's actual centre, so that every time I reselect an object to move it I'm always rotating it around exactly the same place. I find that if I have to move the centre point from the real centre to where I want to rotate around every time, I'm not getting the exact same spot in relation to the object's bounds, which makes for some weird movements.
For example, the rectangle that makes up the upper arm should have its rotation point always about ten pixels down from the top and in the horizontal centre of the object. The elbow right at the top edge, but also in the horizontal centre, of the lower arm. etc.
How would you create a path which traces the central path of text. Not an outline path..Or the fill when you create outlines
If you imagine a single line following the middle of text. This would then allow me to place circles on the path to allow me to use for making rhinestone tshirts.
When using Content Centre, in the Favourite’s section, the Tree View will not default to Thumbnail View. Every time I close the Content Centre it reverts back to Tree View.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
I starting out new to Inventor 2013.What are the steps to place a washer and bolt from Content Centre into the assembly?
View 5 Replies View RelatedWe are working with Inventor Professional 2014.Since switching every time we create a bolted connection using content center files inventor will not let you proceed without checking the bolt/washer/nut out from vault.
This causes issues as other operators are constantly out of date.Also we have custom properties created in our files to tally up with our descriptions on drawings.Every time it is checked out it clears the info and creates new version.
After 20 years of using Autocad thought it time to get serious about putting all my symbolslocks on palettes. Went to design center, selected a folder and right clicked to get "Create Tool Palette of Blocks". Creates a black palettes but no block tools ?
All symbolslocks are individual files. I'm using ACA 2014.
how do I create this arc which does not have centre point co-ordinates . Also not able to use any of the arc or circle features to create this highlighted arc.
View 9 Replies View RelatedIs it possible to export content centre favourites?
I have a number of parts marked as favourites from our custom CC library. I have created folders and sub folders for the various items, nuts, bolts, washer, steel sections and piping parts and would ideally like to be able to export the setup in much the same way as exporting the 'Application Options' out to a XML file. This can then be imported into other machines creating a list of favourites for all users.
Ive got a job im doing that requires the use of chinese steel.
There is a revit library and a asd library for chinese steel sections.
Is there chinese steel that can be added tothe content centre.
If so where can i get it and how do i load it?
I'm aware this has been raised before, see [URL] however this was way back in 2004. Surely there must be a solution by now!
View 1 Replies View RelatedI need to draw a centre line with white background on it. Now i'm doing it by pasting the main line in the background and giving it white so that it shows a white backgound. Is there a way to do just by drawing like normal lines. If we can, is it possible to control the white backgound only to show less than the original line in both ends. This is for illustrations i do for exploding views and i need to draw this line to show it as assembly drawing.
View 5 Replies View RelatedI know why you cant loop select and offset the rectangle but surley if you are going to take the time to listen to users and create requested tools, you should do it well?
View 4 Replies View RelatedI want to change the description of a bolt to be "M(bolt size) bolt. then add the length in another column. example M10 bolt.
I want to know if it is possible to do this using the Family Properties & changing the "Family Description" to something like M=<NND> BOLT. i have tried but had no luck as it only comes back with "M Bolt" & no diameter
Any other way to make it populate a BOM easily.
How to get whether an occurence in a assembly is of content centre (kContentCenterObject) ?
View 1 Replies View RelatedI am trying to create a flat bar family similar to the ANSI one but has smaller sizes & is more in line with the AS standard. I have searched the inter web & have found a few on changing/editing existing families but not creating a new one.
View 1 Replies View RelatedI typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.
However I am experiencing a delima
I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.
The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?
I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.
I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)