When using Content Centre, in the Favourite’s section, the Tree View will not default to Thumbnail View. Every time I close the Content Centre it reverts back to Tree View.
Autodesk Inventor 2013-64Bit Edition
Intel Xeon W3520 @ 2.67GHz
Win 7 Pro
6.7 System Rating
NVIDIA Quadro FX 1800
All options relating to the content centre seem to have disappeared. When i try and add a structural shape via manage tab / author - I get the following message Structural Shape Library cannot be found or Content Centre isnt logged in, please check it and try again. i have checked the active project and it includes the content centre location. Also in an Assembly I do not have the option of placing from content centre.
We have just updated to Inventor 2013 (from 12) and none of our models which contain BSi libraries are working. I understand BSi is within 'Other' CC library.
I have tried copying the idcl files from 2012 CC libraries into into 2013 but Inventor 2013 is not recognizing them. Within the 'update libraries' dialogue box the are listed in red and 'not available'
I've been floundering around for a few days now trying various fixes from the net without success.
For a while now whenever I open a new assembly the default is place from content centre, I use the drop-down and select place.
Today I needed place from content centre and it just doesn't come up.
It is loaded/automatic in the addins.
If I open my projects, in the bottom right corner where I would usually click to acess my installed libraries, I click but it does nothing!
I also noticed studio and BIM are greyed out, but I have started to play with Showcase so not really a problem. I need to set up a read/write library soon, so it's going to be a problem.
Is it possible to export content centre favourites?
I have a number of parts marked as favourites from our custom CC library. I have created folders and sub folders for the various items, nuts, bolts, washer, steel sections and piping parts and would ideally like to be able to export the setup in much the same way as exporting the 'Application Options' out to a XML file. This can then be imported into other machines creating a list of favourites for all users.
I want to change the description of a bolt to be "M(bolt size) bolt. then add the length in another column. example M10 bolt.
I want to know if it is possible to do this using the Family Properties & changing the "Family Description" to something like M=<NND> BOLT. i have tried but had no luck as it only comes back with "M Bolt" & no diameter
I am trying to create a flat bar family similar to the ANSI one but has smaller sizes & is more in line with the AS standard. I have searched the inter web & have found a few on changing/editing existing families but not creating a new one.
I typically use basic ISO fastners in conjunction with the bolted connection generator. Just now I have discovered the ability to add a custom library to the content centre. This appears fantastic as I no longer have to sift through the 10 - 30 or so items available in each category to complete my bolted connection.
However I am experiencing a delima
I have created a custom library called "My Favourites" and it contains 6 bolt families, 1 spring & flat washer family and 1 nut family. All families are derived from the ISO standard (bar the spring washer which is DIN 128) and all thread pitches for the respective nut and bolt connection(s) match.
The problem I am experiencing is when I execute the bolted connection command I can add the bolt, 2 flats and 1 spring washer yet when I come to close the connection with a nut the nut selection box is empty?
I have the active project configured with "My Favourites" "Inventor Feature" & "Inventor Routed Systems" as the only in use libraries. Secondly, I have verified the existance of the nut(s) in "My Favourites" in the Content Centre Editor.
I am using Inventor 2010 updated to SP3 on a standalone machine, running Windows 7 Ultimate (w/ latest updates)
Create a Content Center Part that prompts for a file name and sets the Part Number to whatever I save the part as? It would also be nice to... Have the browser Display name the same as the saved filename.
If I have a standard part with a blank filename, inventor will make the part number equal the filename at the first save. It is this functionality that I require when using Custom Content parts.
E.G. If I have a length of 'RHS 200x100x6.3 - 2000mm' selected from content centre and I want the filename to be saved as 'Part-001', then I would like the Part Number to be set as 'Part-001'.
If I then place the same member in another project/assembly I may want to call it 'ProjectPart-100', where the part number would then be 'ProjectPart-100' and so on.
This method ignores the filename entry in the Ipart table.
I have been trying to add my own shapes to the Content Centre, with some success, but for being able to use them in Frame Generator. I was able to Author a new part and publish it to Structural Shapes and it works very well. However when I try to use it in Frame Generator there is an issue that I do not understand. Frame Generator recognises the family and all of the different sizes and materials, but when it come to inserting the part, i get the following message:
I am not sure what this means. The part family is in my own library in a seperate category. I don't know what/where template file needs to be and is that the same ipt file that I used to create the Content Centre part/shape? Do I need to create a new Standard rather than "attaching" it to the AS Standard?
I have 45 PCs running Autodesk Inventor 2011 in a student PC lab. We have since set up Vault Server and I need to change the location that these point at.The files that I need to edit can be got to by:
1. Open Autodesk Inventor 2. Click “Pro” 3. Click “Options” 4. Click the “File” tab 5. I need to edit the following: Default templates, Design Data (Styles, etc) and Default Content Centre files. 6. The above three will be pointed to a server that has vault setup on it (\vault emplates, etc).
Now to clarify, Inventor works, I do not need assistance activating it, and I do not need assistance with group policy to set up the install..I need to be able to modify the above with group policy through either the registry (if possible) or some other method.
I am trying to create/publish custom shapes into Content Centre and for use in Frame Generator. I can create the i-Part and configure the parameters I want to enable different sizes - no problem. However when I go to "Publish Part" ()
I get the following error.......
do I need to save the ipt file in a different location? What dependencies are there? I get the same result if I follow the Inventor tutorial using the brace.ipt part....
When I'm working in PS CS and open a folder of pictures it always reverts to List view even though I exited last time in Thumbnail view. How can I set it to open in Thumbnail view by default?
Is there a way to transfer project folders and their respective thumbnail content (video, image, sound links) from Corel VideoStudio Pro x4 to the newly installed Ultimate x6?
We are working with Inventor Professional 2014.Since switching every time we create a bolted connection using content center files inventor will not let you proceed without checking the bolt/washer/nut out from vault.
This causes issues as other operators are constantly out of date.Also we have custom properties created in our files to tally up with our descriptions on drawings.Every time it is checked out it clears the info and creates new version.
I know why you cant loop select and offset the rectangle but surley if you are going to take the time to listen to users and create requested tools, you should do it well?
I am using windows 7 64bit and I have install Corel X5 & X6 both on my machine. When there was only corel x5 installed I was able to see thumbnaill view of CDR files in windows explorer but now when I have install x6 I am unable to see CDR file's thumbnail view.
on WinXp and i think Max 8, you used to be able to see a max file as a thumbnail in windows. This meant if you wanted to merge a character, for instance, you didn't have to click though 50 files whilst looking at the preview window, you just viewed the folder by thumbnail and quickly grabbed the right file.
After going to max 9 (again, not too sure on versions) and vista we lost that ability, I posted around at the time but found no solutions.
So, I'm on windows 7 64 bit now and Max 2011 and was curious if this feature was ever fixed or even addressed/dismissed formally by Autodesk?