AutoCAD Inventor :: Half Section View Through Content Center Profiles
Nov 20, 2012I can't sem to get a Half Section View through extruded Content Center parts such as channels, pipes etc.?
View 5 Replies
ADVERTISEMENT
AutoCAD Inventor :: Missing Faces / Profiles On Content Center Parts
Jun 5, 2013As you can see, there is an entire face of the pipe missing. When I highlight over it (2nd picture) it thinks it is there. This has happened on lots of content center parts. There has been a few issues where this has happened with some of our downloaded user content (in our custom content center) even to the point of disappearing entirely.
This has happened across multiple (identical) machines. However, it doesn't seem to be reproducible on demand.
Pertinent info:
Inventor 2014 Pro, 64-Bit, Build 170, Update 1
Graphics - NVIDIA Quadro 2000 with latest current driver (Problem presented before driver update)
12GB RAM and Xeon Quad Core
AutoCAD Inventor :: Ray Tracing While Using Half Section View
Dec 9, 2013Ray tracing disables when I use the half section view, when I turn it on again it disables the section view. Is there any way I can see a cross section of my assembly in realistic mode with ray tracing?
View 3 Replies View RelatedAutoCAD Inventor :: How To Look In Half Section View In Opposite Direction
Aug 12, 2013I made a half section view and it cuts what's above the plane of section in the Z direction, i mean all that's above this plane.
I want it to cut everything that's underneath, below the plane, at my choice, so i can inspect everything what is above the plane of section.
AutoCAD Inventor :: 2013 - Cannot Export In Half Section View Mode
Jun 9, 2013Cannot inspect, export pictures, constraint while in half section (or other) view mode...
View 6 Replies View RelatedAutoCAD Inventor :: Section Line Attached To A Center Hole (side View)
Oct 15, 2013The objective is to section a part, selecting a center of the hole (side view, not top view) to attach the section line.
In the hole's top view we can select the center hole to attach the section view, but in the side view, i can´t find any attach point, even if i have a center line.
I know we can edit the section line later and create some construction lines to center the section line with the hole, but i wonder, there's a better process, more automatic, to achieve this?
AutoCAD Inventor :: Content Center Filter Voids All Content When Engaged
Nov 20, 2011Somehow the Content Center Filter clears all content while in ISO or DIN. Both libraries are turned on in project.
I can see only one custom library when either filter engaged. I also see both ISO and DIN parts when filter is off.
[URL] ........
AutoCAD Inventor :: Incorrect Radial Section View - Section Participation None
Sep 24, 2012The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
AutoCAD Inventor :: Section View Not Parallel With Section Line?
Nov 19, 2011why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedAutoCAD Inventor :: Content Service Doesn't Work With New Profiles (2012)
Dec 12, 2011I'm a computer tech in a school that uses Inventor 2012. After cloning the computers, if I log in using a profile that was there before, I can access the content service but when a student logs in, nothing happen when trying to access it. I looked for the .exe.config files in the Inventor bin directory but could not find anything related to the computer name. The structure is different in this version.
View 2 Replies View RelatedAutoCAD Inventor :: BSI Content Center
Jun 1, 2012I used to use the BSI content fine in my old version of Inventor, but on this years version there appears to be no BSI content. I have tried reinstalling the content center and all of the options are selected but still no BSI?
View 2 Replies View RelatedAutoCAD Inventor :: Can't Log Into Content Center
Nov 18, 2011I can log into data managment services outside of inventor.
I can't log into content center or access frame generator from inventor.
INV 2009
AutoCAD Inventor :: How To Use Content Center
Jun 22, 2012I'm using a student version of inventor 2013, and i'm trying using the content center for add bolts at my project, but all the components are unable for my use, because everything are marked as read only.
How can i do for use these components? and other question, how can i create account at vault?
AutoCAD Inventor :: Content Center Characters
Oct 13, 2012We have an extensive library of parts that we consistently utilize, but we do use Content Center for hardware and routed systems components.
All of our library parts have our company ERP's item number in the stock number iProperty, and the ERP's description in the Comments iProperty.
For CC items, we have added columns for these and mapped them to the appropriate iProperty.
Everything works great except for one thing.
Many of our ERP descriptions inlude inch marks, foot marks, and the & symbol. For our normal library parts thhis is not an issue. However, CC items utilize these characters differently. The result is our descriptions come out different that what is entered.
See the example below...
How to include these characters in the CC descriptions?
Inventor 2012 SP3 ~ Vault Pro 2013
==================
Lenovo D20 Workstation Intel Xenon E5640@2.67GHz (2)
Win 7, 24gb RAM, NVIDIA Quadro FX 3800
AutoCAD Inventor :: Content Center Sharing
Jun 22, 2012At my company we currently have a huge number of Autocad deployments for 2010,2011,2012. Right now our deployments weren't setup to include the content centers. I have installed 2012 Inventor on my personal computer as a trial version to grab the .idcl files. I was wondering if I would be able to just drag and drop these onto a server and have my co-workers point to the file location within inventor itself via options>content center>etc.
View 6 Replies View RelatedAutoCAD Inventor :: Content Center Not Visible
Nov 29, 2011Two computers with Inventor Pro 2011 on them, same set up in Apllication Options/Content Center and Apllication Options/File. On one Inventor sees Content Center on the other does not. What could be the problem?
View 2 Replies View RelatedAutoCAD Inventor :: Content Center Is Empty
Jun 24, 2013Installed 2014 recently, and now my Content Center has nothing in it. The "Place from Content Center" window loads, and there are no folders. My item count is 0. I've attached a screen shot for reference. Clicking the refresh button does nothing.
We have no custum hardware/materials/etc.
If I try to update the content center library (step 2), the Configure Libraries is full of "Not Available"s. Again, I've attached a screen shot. I'm nervous to continue migrating with out all that info.
There are two pc's with IV, and the content center is working fine on the other pc. The CC is a local thing, and only my computer seems to be upset.
AutoCAD Inventor :: Customized Content Center
Mar 24, 2012I want to make a customized channel with all the dimesnions fixed - except A and G (variables). See attached screen shot.
View 1 Replies View RelatedAutoCAD Inventor :: Publishing To Content Center
Jul 24, 2013I just created an empty Fastenal Library, and it is set to Read/Write. We order most of our fasteners from them, but not much else, so I used "Copy Category Structure To" Fastenal. I created a plain washer to add to the library, but when I try to publish it, I can't get it to work.
When I "Publish Part," I select Fastenal and English, then am asked to select a category to publish to. The Washers folder is greyed out, along with most other folders, but the Ball sub folder is not. I can't select Plain, which is what I need, but I can select Ball.
Also, is there a way to delete sub folders? I right click on Pins or Rivets, and the option to Delete Category is greyed out.
AutoCAD Inventor :: Content Center Customization
Feb 9, 2012I have been working on creating custom content center families that will populate our company's part numbers and descriptions into the browser and drawing BOM. I have been quite successful in this except with the material. I've created custom materials for the fasteners that have the specified strengths and finishes per the fastener. By doing this I've created a different problem.
How can I create a custom property that will insert a specified value for material into the BOM? I've tried to change the link for Project.Material and then the part inserts as Inventor's default. I don't think creating individual material styles for each fastener is a viable one since I'll end up with duplicate style names.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer
AutoCAD Inventor :: Content Center Printout
Aug 6, 2013Where I can get a pdf of the standard Content Center Library? Just a list of all the parts and sizes along with nomenclature.
Dell XPS 8300
Intel(R) Core(TM) i7-2600 CPU@3.40GHz
16GB RAM
Win 8.1 Pro
Autodesk Product Design Suite 2014
AutoCAD Inventor :: Content Center Link
Oct 5, 2012I am using content center for fasteners I want for my assembly.However, when I close the assembly drawing and try to reopen it, the link has been lost between the assembly and the fasteners and I am unable to find them.
I have created a project file before I start the assignment thinking this will solve the linkage problem but no luck.
AutoCAD Inventor :: Content Center Materials
Mar 11, 2011I'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9). The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor. The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material". Everything looks fine. But no matter what material I select, I get 6.8.
I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material. I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.
AutoCAD Inventor :: Bar Channels In Content Center
Mar 26, 2013I'm looking for a 2" x 1" x 3/16" bar channel in the Content Center but I cannot find anything smaller than 3" x 1.41" x 0.17". I've been looking under Structural Shapes > Channels. Am I missing content from the Content Center? Or does this just not exist in the Content Center?
View 6 Replies View RelatedAutoCAD Inventor :: Content Center Reference
Feb 2, 2013I'm very new to Autodesk Inventor 2013.I'm working on a small project on my laptop at school. Recently I tried to work on this project at home. So I put everything on a Memory Stick, plugged it in at home and opened the file as usual. The problem is that the file needs references to the content center parts like screws etc. and can't find them. I was looking through my whole computer for this content center files Inventor is asking me, but I can't find them.
If I open a new project and open the content center it works without problems. The problem is just that I can't tell Inventor where the parts are to which it needs to be referenced.
AutoCAD Inventor :: Content Center Parts In BOM
Mar 9, 2012I am just starting to make assembly parts from the content center and have found that for the most it is useful. Unfortunately I have found that when these parts are placed in the assembly and a drawing is make of the assembly the bill of material lists total inches of a structural member rather than quantity of piece parts in the quantity column. Thus a 10" tube shows a QTY. of 100 in. rather than 10 piece parts. I have removed the check to export B_L in the function menu but that does not solve my problem. Is there a way to get this to read quantity of piece parts and not total length of material used?
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: Content Center Empty
Apr 18, 2013We have upgraded from Inventor 2012 to 2013 in August and my company never uses the Content Center, but I need it now and when I opened it up, the center is empty. I need bolt and washers and its empty. I tried linking the libraries folder to the Content Center link but nothing.
View 8 Replies View RelatedAutoCAD Inventor :: Cannot See Content Center 2013
Oct 30, 2012I have re-installed the content center. we do not use the vault even though i had to install the basic to install the content center see attached for my file settings for the content center.
View 9 Replies View RelatedAutoCAD Inventor :: Set Up Custom Content Center?
Feb 2, 2012I've never set up a custom content center before and I've done some research on the forums but I could really find the information I was looking for. My goal is to change the stock number and description to our company standard. Right now I edit it with the bom editor which is a bit time consuming. Another goal i would like would be that the part number is always the file name.
-Autodesk Inventor Professional 2010
AutoCAD Inventor :: Customized Content Center
Aug 2, 2012I'm working on creating a customized content center for my company. I am having a problem with one of the CC parts. My process of operation is as follows. Change project file to default. Make sure Library View is on Merged View. Then I select the part that I need. RC copy to our project file. Revise the Part Numbers to match our part numbers then ok. Go to place in an assembly drawing and as soon as you click on the part Inventor crashes. It seems to be only on particular part. All of the other items I have place (over 50 or more) into our customized content center work fine, but not this one.
It seems that whenever I set a key column to be "Part Number" it crashes. If I have any other key columns selected (minus part number column) it works fine. I've also tried creating my own column that says part number and when that one is selected it still crashes. The part that I am having an issue with is the Slotted Hex Head Machine Screw - Inch. Also we are still running 2010 with service pack 4 I do believe.
AutoCAD Inventor :: Content Center Files
Feb 22, 2012Why can't Autodesk be more consistent? I'm trying to use Part Number in my Description Field in Family Table.
I.e.. Hex head bolt : DIN 931-1 - M6 x 60
Countersunk bolt : M4 x 20 DIN 7991
Why the switch???