I have created a 12" X 36" photograph that I want to print. To print it I will have to pay for a 24" X 36" print so I want to duplicate or tile the same picture (one on top of the other) so that I get two prints for the price of one. I can't figure out how to do this in photoshop.
View 1 RepliesI have setup a command within an action to "merge visible (with duplicate)"... and sometimes this action runs perferctly well and does what its supposed to, but other times it simply performs "merge visible" without creating a duplicate, and thereafter the action has been changed to "merge visible" forever, until I re-record it that is.
Is this behaviour normal? Can it be fixed?
I keep recreating my directory tree to fix this, but LR keeps recreating a folder with the same name as my import folder. So imagine my overall structure is:
Mac Hard Drive
LR Photos
Many folders, including ...
Imports
---
LR will create a new directory reference at the top of the list of directories, in lowercase. So at the top of the directory list, you'll see, after an import ...
lr photos (note lowercase)
Imports
I'm attaching a screenshot ... (with lots of folder names deleted obviously)
It seems like it's related to the import process, but i never manually type or change during imports -- i leave it alone, and yet it makes this new lowercase reference. (it does not actually create new folders on the hard drive.)
Lightroom creates new duplicate folders when I import photos.
My directory structure is:
~/Pictures
/Lightroom
/2012
/2012-1
/2012-2
etc.
/2013
/2013-1
/2013-2
etc.
When I import, Lightroom creates a duplicate "Lightroom" folder, which it places into the 2013 folder. Inside that folder it places a duplicate 2013-12 folder and inside that the photos.
Alternatively, it sometimes places the new folder (this time named "lightroom" [lower-case "l"] at the same directory level as the "Lightroom" folder.
I am using Light room 5..upgraded from 3.Discovered Light room had been sending images into my music folder called 2013 as well as the picture folder I chose as export destination.Editing was showing in both.
I thought this was just virtual copy, not to worry.. until I tried to delete it in my music folder..and the recycle bin found the folder too large and only the option was to delete permanently? Seriously a huge file! (in a very short time) So I did delete folder 2013 ..and another folder was recreated in my music folder (2013) with the very next edit.
I created a new catalogue “going in the back door of Light room”.. and moved this "music folder" into pictures folder within Light room as well and then clicked the option of always load this new catalogue on start up. Tried another edit this morning.
If I import a whole folder of mixed RAW and jpeg images, but only edit one. The whole imported selection will be sent to my music folder..and where Lightroom can only find the images.
If I delete this folder and go back to the original RAW file in Light room..a preview of the image cannot be shown in develop module...although the image can be developed.
Plus...the original RAW file is still in the original folder within the picture folder as well...and the edited picture is in a separate correct picture folder where I intended it to go. So It seems I am duplicating the RAW files into this very mysterious folder as soon as I import them.
When I am importing photos into LR5 and sending them to my hard drive at the same time LR is creating a duplicate folder of the same size on my external hard drive. It creates the folder I tell it to create then it create a duplicate folder called "imported on, date, year" Questions: Why is this happening? Is there a setting in LR I am missing. Most important question, can I delete this folder, I want to make sure it holds not important information.
View 3 Replies View Relatedwhy content center creates duplicates of existing folders?. Some of the folders have 6 or 8 versions and there is also a duplicate EN-US folder within the EN-US folder with nested folders. So bottom line i have multiple locations and nested files within the content center. Needless to say there is a lot of time spent pointing inventor to the parts necessary to open an assembly.
We are working on a network and are all pointing to the same content center location. We are all using the same project files. Sometimes it works as you would expect, other times not.
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
somehow my cs6 workspace has gotten muxed and, when I dup an image the dup is created at full size versus the same size as my original...I often work on the org image at 50% and want to create the dup at 50% also...
What do I have to do to get back to where I was?
What happened with duplicate layer in Photoshop CC? In Photoshop CS6 was:
- if select a number of any raster or shape layers and press Cmd-J - those layers are copied and placed on top on layer palette. In history added "Duplicate Layer". It's perfect.
In Photoshop CC is:
- if select a number of any raster layers and press Cmd-J - those layers are copied and placed on top on layer palette. In history added "Duplicate Layer". It's perfect. BUT!
- if select a number of any shape layers and press Cmd-J - those layers are COMBINED INTO ONE and placed on top on layer palette as ONE layer. In history added "Shape Layer via Copy". It's bad.
I don't want to get one combined shape layer. I still want to get that number of shape layer copies. Why it combines? Is there any settings to turn this combine off?
I have 2 opened files in photoshop, and I duplicated a layer in file 2 to the file 1. When I click on the file 1, I can see in the layers box the layer that i had duplicated, but I can't see the image on the screen.
PS: the layer is not hide
i want to make the other side of a path that i have made by duplicating the first one ie image here
but when i duplicate the path i want to flip it horizontally and connect it to the first. Im not sure where to start with this.
I am trying to duplicate this logo and I can't seem to get the right layer effects and filters to match the 'T' and 'S' correctly.
View 4 Replies View RelatedI have a picture all set in Photoshop. It is a 3x4 photo. I want to duplicate it 6 times so I can print it out on one sheet of paper and then cut the 6 same pictures from that. I try to duplicate it and it just keeps opening up a new window within photoshop.
How can I get the 6 photos all on one sheet and lay them out - 3 across and 3 on the bottom? I do not necessarily want them right next to each other and want a little space between them if that is at all possible.
how to print business cards from Adobe Photoshop? .
View 1 Replies View Related1) How do I duplicate something into the same layer that it is in? Everytime I try to duplicate or copy and paste, a new layer is made for it.
2) How do I merge layers?
3) Is there some sort of outlining tool? Kind of like the ink bottle in Macromedia Flash?
4) Is there a configuration control for Wacom tablets built into Photoshop?
select multiple channels and duplicate them all at once like you can with layers? As of now I'm having to select each channel and duplicate one by one. Once I select more than one the duplicate option becomes grayed out.
View 4 Replies View Related When I duplicate a layer, sometimes the layer will automatically duplicate as a copy within the same document, and sometimes it will open the dialog box that allows duplicating to another document.
It seems to happen randomly, on both iMacs I use, as far back as I can remember (using CS4 now).
Everytime I try to duplicate groups in photoshop cs6 to another open PSD file it usually works, but lately whenever I try to do it it only gives my the option to duplicate the groups to either a brand new file (an untitled file) or to the original file (that i'm duplicating the groups from). It won't allow me to duplicate them to another open PSD file.
For example, (in case i'm not being clear), say I have 2 files open such as A.psd and B.psd but i want to duplicate a bunch of groups i created in A.psd to B.psd. When i click on the groups i want to duplicate and the option box opens- in the destination box it only gives me the option of duplicating the groups to either A.psd (which is useless) or to a new file. It doesn't give the option to duplicate the groups to B.psd. It only gives the option if it's just a layer. I either have to merge groups into one layer or make them into a smart object and use the duplicate layer option instead. It's become a annoying problem because I want my groups to just duplicate. I shouldn't have to merge them in order to send them into another file. It has always worked until now.
Im trying to duplicate this photo with another and i cant seem to figure out how to duplicate the pink/purlpe dot effect that shows most through out the face portion of the photo.
I have tried most things but kinda closest was HARD MIX layer mode on a desatureted copy of the portrait photo with the bakground "pitched horizontal lines" bleeding through. But it didnt come close anyway..
PS:Cs6So, I have done this ...
1. Radial Gradient on the BG layer > Duplicated the layer then Transformed it down for a "Floor" effect
2. Added a Mask then painted to fade the duplicated layer into the BG layer
3. Opened the Paths panel > Clicked the New Path icon > Pen tool (set to shape as I assumed it should be because I tried it set to Path and down the line it didn't pan out) I drew the basic shape for my project (which is to be a camera)
4. Copied a Leather Texture from a different document and Pasted it on to the Same Layer (ie: I didn't create a NL)
5. Added an Adjustment layer > set the HSL's
6. Copied the basic (camera) path and placed it on top of the leather texture (layer)
7. Selected the Texture and the Adjustment layers > Ctrl+G > Layer > Vector Mask > Current Path
Below is where I am stuck
8. I am suppose to Duplicate the Path of the Camera ... but ... when I drag the Path down to the Create New Path Icon ... or attempt to Duplicate the Path by Any means and then perform the next step which is:
9. go to Layer > New Fill Layer > Solid Color ... either the color will fill just the shape of the camera or it fills the entire layerwhen the camera does fill with a color I cannot get the next step to work which is:
10. Add a Rectangle Shape and Modify its shape > set the Rectangle to Subtract ... Well, the Rectangle is NOT Subtracting
I know this because the leather is not showing through the color So, all in all I suppose I am asking how I should Best go about DUPLICATING a PATH ... ??? I mean, do I ... need to copy the path into an other component? An other layer? Should I be using NL where I am not using NL's?
I have been reading the manual but I am also still trying tuts because I learn better when I do things as well as read. So, here's todays dilemma
I made the Shape with no problem and used the Pen tool set to shape. The only way I have been able to find to Duplicate a Shape (and/or Path) in the user manual is to select the Path Selection tool (the black arrow) from the tools panel and use Alt + Drag
however, (as you can see) I need the Shape to stay in the same place - so, I tried to drag it back into place - but the Duplicate moves with the original Shape and when I go to change the color - the color changes both shapes ... ? Also, how do I know if I have Duplicated the Path or the Shape?
Because once (we) I figure out how to Duplicate the Shape & change the color of just the duplicate I then need to Duplicate Just the Path. The tut says to set the Duplicated Path Mode to Subtract but it doesn't make sense to me - it would seem that the Mode should be set to Subtract beforehand.
I'm using CS5, not that it really matter much for this question. I've used the same watermark for probably 5 or 6 years now. All I remember about creating it was that I did it while either reading or watching a tutorial on the subject. The reason that I love it is because is shows up very well no matter whether it is over a light image or a dark image. I have long since lost the tutorial and have spent the last day and a half looking at other tutorials with no luck. None of the ones that I tried work on both light and dark images.
Unfortunately, although I've been editing images for years, I do VERY little text and or font and or font effects work. That's why I'm a total loss about this thing. I will be attaching a jpg of my watermark duplicated with one placed on a white background and the other on a black background. Take note that this is the exact same watermark on both backgrounds. It isn't one that is special for dark and one that is special for light.
Steps that I need to make in order to duplicate this effect so that it looks exactly like this on both white and black surfaces? The font is "IMPACT".
I've brought this up before and didn't get an answer but now that my project is hundreds of layers big and using 12 layer comps, this is becoming increasingly annoying and affecting my project flow:
When will the issue be resolved where when you duplicate a shape layer that has previously had specific anchor points selected (but that none are currently selected since the entire layer is selected in the layers pallete and I am using the move tool, not direct select tool), it duplicates only the previously selected points.
It's a huge waste of precious time to have to:duplicate a layer. realize that only a portion of the layer got duplicated.delete that new layer select the original layer choose the direct select tool click on shape to show the anchor pointshit escape so all points are deselected then try again
I've been working with Mac CS5 since it came out. And Mac Photo Shop in general since the early 90's. That said. This just started today right in the middle of a project:
Normally I hold down my Option Key and drag a layer down to the New Layer icon at the bottom of the Layers pane. Now I get a dialog popping up asking me if to give the duplicate a name (if it's multiple layers), or to ask if the default name is OK.
This wasn't happening earlier in the day. Why has this all of a sudden started happening? How can I turn the pop-up off? I've tried resetting the prefs with Cmd-Opt-Shift on reopening PS5.
Yes, I know I can do this with Cmd-J, but I've doing the Opt-Drag methods for many years, and that's now how I'm used to working. Running i Mac with 8 GB RAM, OSX 10.8.2. RAM usage set to 70% default. Photo Shop CS5 10.0.4 x32.
When using floating windows for images it is very straightforward to copy content from one image to the other.With docked windows in cs6 there's of course the duplicate layer-feature but there's certainly also a drag and drop method. But how to get this to work? I tried dragging Layers and Ctrl-tabbed, I dragged the Layers onto the tab of another image and tried so by holding all sorts of modifier-key.combinations.No avail. So what was the correct way to copy from one image to another by using Drag and Drop?
View 8 Replies View RelatedI've been working with CS5 since it came out.This just started today right in the middle of a project:
I hold down my Option Key and drag a layer down to the New Layer icon at the bottom of the Layers pane.I then get a dialog popping up asking me if to give the duplicate a name (if it's multiple layers), or to ask if the default name is OK.
This wasn't happening earlier in the day.Why has this all of a sudden started happening?
How can I turn the pop-up off?
I can't figure out how to duplicate the patterned edge on this pic (see attach).
View 1 Replies View RelatedI made a smart object and duplicated it about 10 times...
I want to make an edit to the contents of one but I don't want to edit every instance of it. Is there a way to edit only one at a time?
way to make more than one copy of a layer at a time? You can right-click on a layer and duplicate it once, but often I'd like to make several copies on different layers.
View 2 Replies View Relateda way to duplicate a layer behind a layer, rahter than in front of a layer? Maybe through an action script? I have tried a few times without luck....basically, I do a lot of architectural photo composites. When I am placing trees, I often duplicate layers, and scale, and tint to fill in area. But when I duplicate the layer allways goes in front, rather than behind. Since I can only scale down to keep my resolution crisp, I then have to manually drag that layer down the list, so it is behind the layer that was duplicated.
View 2 Replies View RelatedI'm duplicating layers one at a time. I have to duplicate the same layer for a total of 108 layers and this seems ridiculously time consuming. Can anyone tell me if there is a way to make a large number of duplications at one time?
View 5 Replies View Related