I have a road map in jpg format. I want to draw with PS CS2 in the map so to highlight the route I drove, similar to grabbing those fluorescent marker pens and draw the road manually on paper.
View 3 RepliesWe as a company have just made the step towards Revit and I have been given the task to start using it and getting things to be presented as our company standards.
I have took a bit of time to create our section markers. They all seemed to work great and ticked them as complete off my list till I tested them and realised they are numbered. Is there a way I can get my section to be alphabetical e.g. section A-A, B-B etc.
Is there an option in Photoshop to add Cut Markers to a Print job such as Business Cards, etc.?
How can I add the Cut Markers to my work?
We have recently upgraded our lab where I work to CS6. Previously we were using Photoshop 7.0. The issue I have relates to an external piece of software that queues prints to a large format photographic printer. This software is, picky, about the JPEGS it receives.
The JPEG's saved out of CS6 do not process through this software. The JPEG's saved out of Photoshop 7.0 do. I can strip the 'APP markers' from the CS6 JPEG's using Irfanview and this resolves the issues with the CS6 files. This is not good workflow.
I have tried creating a blank Photoshop file in CS6 at the relevant dimensions and pasting the image data on to it then saving as a JPEG in CS6. This suffers the same problem. So I believe the issue is related to the extra data put in the JPEG headers from CS6.
I have as yet been unable to find a way to reduce / eliminate this extra data.
From what I can find on adobe.com they don't really offer any support? I am in Australia and there is, from what I can see, no one employed by adobe to provide support. $1200 worth of Photoshop and no support!!! Good work if you can get it .
How do you add markers on the timeline? Also, can I add markers to individual clips so I can line them up? Example, have a beat to a music lined up, and on a video I got something I want to align with the beat, can I place a marker on the audio and another on the video?
View 2 Replies View RelatedI use another NLE and VSP X6U. One thing that I would like is timeline markers. Why? I do quite a few videos where the transitions have to be on the beat of the music. I do this with timeline markers that are placed on the 'beat' of the music. I can then move the in and out points of a video or image and it will "snap" to the position of the marker.
Also, I can label these markers, so I can use them to "remind" me of what I want to do between them.
With VSX3 DVD production done by DMF 7 SE , are chapter markers added in the project timeline useless as we have to redo all chapters when transfered by VSX3 into DMF 7 SE ? or is there a way to have the markers trigger a chapter as before ?
View 6 Replies View RelatedI am putting together ROW markers using a process found on the Being Civil blog. The Marker setup shows on the Assemblies fine, I go through the corridor section editor and I can see the marker at the proper location for the ROW. The ROW marker will not show up on the section views, Not sure if I missed a step but everything seems to work up to the point of putting them on the section views.
View 3 Replies View RelatedI seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
I suspect I may have hit a hotkey shortcut for hiding the visual aid for selected objects.How do I change it back? I cannot see anymore which element (object, anchor, path, etc.) that I have selected on my artboard.
View 4 Replies View RelatedWhen I started LR4 the first time it offered to migrate my LR3 (3.6) catalog. I accepted and it seemd to work fine. I now opened an older collection and noticed that all my markers (accepted, rejected, unmarked) have disappeared.
View 2 Replies View RelatedLet's say I have 4 sequences, of which 2 are multi-cam. I go through each sequence and add my Markers. How can I locate these sequence markers without opening each sequence and looking at the Markers panel?
View 3 Replies View RelatedIf i have a clip on the timeline and i doubleclick it to bring it up in the source monitor and add markers. The markers appear in the clip in the source monitor, but they the markers don't show up on the clip in the timeline. Never had this issue with CS6 (or FCP). Is it just a setting? Or this is a bug in Premiere CC?
View 5 Replies View RelatedI am evaluating Video Prox5,and wanted to know if it nis possible to place cue markers on Audio track as an aid to sync particular points of video and Audio.
View 1 Replies View RelatedI have created several chapter markers in the video timeline and when I go to share and create a DVD or blu ray disk I see the chapter markers are reflected in the the create chapter menu which is what I would expect. I don't want to create a whole disk but I want to create a video file like mp4 that includes the chapter markers as part of the video file. I believe that the mp4 format supports chapter markers based on this page [URL]
I can't seem to create a video output file that also includes the chapter markers. Is this possible in video studio x4 or am I forced to create a DVD or blu ray disk with a menu structure in order to preserve the chapters in the resultant output?
I have a profile view with the existing ground profile shown. The alignment the profile is referencing was stretched at the front and now the profile markers do not line up with the profile line. The profile line updated as it should have, but the markers did not.
See attached screen shot.
I am trying to turn off some markers shown below in magenta (the circles). The problem is, I've gone through the Alignment Styles and can't seem to locate the layer that these markers are actually part of.
View 4 Replies View RelatedIs there a way to load our old section makers when cutting sections through assemblies? I am not so fond of the ones that come per-loaded with Inventor. This is in Inventor 2012.
View 4 Replies View RelatedWhy do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
is it possible to move multiple scene markers at once ? Shift selecting and moving doesn't work.
View 3 Replies View RelatedWhen I m in the source panel using the audio waveform and I add a marker the scrubber goes to the start of the clip or when I try to edit the marker it will take the scrubber to the start of the clip. Is there a way when I add a marker to stop the scubber from going to the start of the video?
View 6 Replies View RelatedI'm doing' music and animation, but I want to place markers every few seconds, or consistently to the bpm. It would save me a WHOLE not lot, but ton, of time.
View 2 Replies View RelatedAfter deleting a gap between to clips: it would be useful if the markers would be moved, too.But maybe only a feature in CC, too?
View 2 Replies View RelatedI am working on a timeline of out company's work through the past 20 years. I have the base mechanics down by making a "rough layout".
http:[url]......
Going back and forth between "years" (noted as large 1,2,3,4 text blocks) is fine by using the arrows at the bottom.
My problem is that I'd like to be able to jump to any year from any year. So I added the numbers buttons to go to the marker for that year. Here's the script I'm using to do that (in this case I'm going to the label "two"):
sym.play();
// stop the timeline at the given position (ms or label)
sym.stop('two');
The problem is that I want it to play the timeline to the number I've selected. So if I'm on "4" and click on "1" I want it to scroll through 3 and 2 to get to one.
Two of my elevation markers (North and East) have disappeared. The actual elevations are still visible and fully functional, but their tags have disappeared. "Elevations" is turned on in the View Properties dialog, but only 2 tags appear.
How to get them back?
If I add markers to a source clip and enter a name, then when I open the Markers panel, I only see Comments listed, not Names?
View 4 Replies View RelatedI know this can't be done at present but it would be great to be able to see both timeline & clip markers as you work through a sequence of subclips. This is for those that get handed a project where the Markers have been spread across both clip & sequence. Even a merge function based on current location would do?
View 3 Replies View RelatedI'm trying to create a label which gives me a distance from the begining of my reference, but coordinates are not good for this because my reference is not linear. It is a alignement with tangents and curves. What I'm trying to figure out is how to create a label with the distance of the projection of the begining point of my feature line in the alignment to the begining of the alignment.
For example: There is a alignment (road) and a feature line (curb). The alignment is the axis of the road and the feature line is an edge of the road (not need to be exactly an offset). How to configure a label to show the two kilometer markers (0.0001 precision) of the road that are the beginning and ending markers of the part of the road that has curb?
But, how do I enable Snap to Markers in the Timeline View?
View 3 Replies View RelatedIs it possible to change the size of the glyph markers on a feature line and if so how?
View 3 Replies View RelatedI've placed the Multi-Segmented Grids in my large project that requires (6) dependent views per floor plan. In each of the dependent views, I'm trying to get the grid markers to show at the ends that ~I~ want them to show, but I'm not getting the checkbox.
Is this by design? Or is it a bug?