AutoCAD Inventor :: Custom Section Markers
Feb 15, 2013Is there a way to load our old section makers when cutting sections through assemblies? I am not so fond of the ones that come per-loaded with Inventor. This is in Inventor 2012.
View 4 Replies
ADVERTISEMENT
Revit :: How To Create Section Markers
Mar 25, 2013We as a company have just made the step towards Revit and I have been given the task to start using it and getting things to be presented as our company standards.
I have took a bit of time to create our section markers. They all seemed to work great and ticked them as complete off my list till I tested them and realised they are numbered. Is there a way I can get my section to be alphabetical e.g. section A-A, B-B etc.
AutoCAD Inventor :: Custom Section Mark
Mar 13, 2013I'm trying to migrate from AutoCAD into Inventor while maintaining my companies standards - and I need to change the way section marks show.
Is there a way to create a custom section mark routine (in AutoCAD it was a LISP routine) to make section marks as shown in the attached picture?
In the AutoCAD version, it took 3 clicks, and then prompted for text inputs - 1st was the end of the line with the circle, 2nd was the other end of the line, and 3rd was the direction of the section. Then there are 2 text prompts - first the section label, then the sheet humber.
Is this possible to do in Inventor? I figured out how to make the circles with prompted text but can't figure out how to make the lines and arrows to go with it without being fixed length and position.
AutoCAD Inventor :: Using Custom Section Properties In Frame Analysis
Jan 23, 2012I am busy constructing my own Structural Shapes Library in Inventor 1012.During the Authoring and Publishing step I mapped Cross Section Properties (Ixx, Iyy, Torsional Section Modulus, Torsional Rigidity Modulus etc) to set parameters in my iPart table.
I have noticed that once this part is then used in Frame Generator to create a simple beam and then analyzed with the Frame Analysis tool, the analysis tool uses the geometry of the part to calculate these properties.
Is there a way that I can force Inventor to use the properties in the iPart Tables? I am worried that any errors in creating the cross section geometry will be carried into the Cross Section Properties calculated by Inventor.
AutoCAD Inventor :: Calculate Section Modulus On Certain Cross Section Of Solid Part?
Dec 9, 2013I am trying to verify the bending strength of a solid part. Need to calculate the section modulus on certain cross section. Don't know how to do it using inventor.
View 7 Replies View RelatedAutoCAD Inventor :: Incorrect Radial Section View - Section Participation None
Sep 24, 2012The section view behaves strangely with the ‘section participation: none’ components
Invertor2012 sp2
Win7 x64
AutoCAD Inventor :: Section View Not Parallel With Section Line?
Nov 19, 2011why my section is not parallel with my section line. I did constrain my section line in the section line sketch.
View 2 Replies View RelatedAutoCAD Civil 3D :: Multiple Section View In Custom UCS
May 14, 2013I has a project where my Custom UCS don't is the Autocad's Original, but when I make Multiple Sections Views, the C3D does it in Autocad's Original UCS. How I make this on my Custom UCS?
Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz
4,00Gb RAM
Windows 7 - 64bits
AutoCAD Inventor :: Section An Assembly In Breakout But Not Section
Sep 24, 2013In the drawing view below, I want to section the green assembly only within the red section. I've tried this with a breakout and it doesn't work. There doesn't seem to be a way to exclude the green from the section and yet include it in the breakout.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD Inventor :: Top Section To Blend Into Bottom Section?
Jan 11, 2013How can I revolve the top section to blend into the bottom section.
View 2 Replies View RelatedAutoCAD Inventor :: Default (custom) Material For Custom Content Center Parts
Feb 21, 2013When inserting a content center part for which we have to choose a material, we would like to have a custom material as a default (material with name: "No material selected"). So when selecting no material for this part (for example when the user forgets to select a specific material), the default material (in this case material "No material selected") will be active. In this way, we can see in one view across the BOM which parts have no material assigned yet.
How can this be achieved in the content center (editor)?
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
AutoCAD Inventor :: ILogic - Set Custom Property In Custom Content Center Part
May 16, 2013When using Inventor with Vault, we have a problem when categorizing custom content center parts in Vault. In short, custom content center parts are incorrectly categorized as "Content Center" and automatically released - as there is no property that we can use to identify these files.
I need iLogic code to trigger when custom content center files are created/saved, wich adds the following custom iproperty "IsCustomContentCenter=True".
Revit :: Section Family Custom Parameter?
Feb 7, 2014I would like to know that while system families are not editable, would the shared parameters file for these families be accessible? I am looking to add a custom label for sections.
View 1 Replies View RelatedLightroom :: Add Custom Icon In Import Section Of 5?
Jun 17, 2013how to add a custom icon in the import section of Lightroom 5.
when i right click on my camera it says "add custom icon" but then sends me to google and a camera icon,but how do i load it into Lightroom?
AutoCAD Inventor :: Can't Apply Custom Appearances To Custom Materials
Apr 4, 2013I am trying to create custom Materials in Inventor 2013. I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.
After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.
Lightroom :: Delete Custom Profiles In Camera Calibration Section?
Mar 4, 2011I installed Xrite ColorChecker Passport software and loaded a couple of custom profiles in the develop module under camera calibration. There was a glitch in the software and it did not allow me to name those profiles. Once I uninstalled that version and loaded the newer version the naming process works fine. I would like to be able to delete the unname profile out of Lightroom but I am not seeing how that can be done.
View 13 Replies View RelatedRevit :: Custom Section Head / Text Doesn't Rotate - 2011
Aug 12, 2011I made this custom section head but the text doesn't rotate and follow the head location.
View 1 Replies View RelatedAutoCAD Civil 3D :: ROW Markers Are Missing
May 24, 2012I am putting together ROW markers using a process found on the Being Civil blog. The Marker setup shows on the Assemblies fine, I go through the corridor section editor and I can see the marker at the proper location for the ROW. The ROW marker will not show up on the section views, Not sure if I missed a step but everything seems to work up to the point of putting them on the section views.
View 3 Replies View RelatedAutoCAD Civil 3D :: Labels Not Next To Markers?
Aug 15, 2013I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
AutoCAD Civil 3D :: Profile Markers Do Not Line Up
Sep 11, 2012I have a profile view with the existing ground profile shown. The alignment the profile is referencing was stretched at the front and now the profile markers do not line up with the profile line. The profile line updated as it should have, but the markers did not.
See attached screen shot.
AutoCAD Civil 3D :: Turn Off Markers In Alignment
Mar 15, 2012I am trying to turn off some markers shown below in magenta (the circles). The problem is, I've gone through the Alignment Styles and can't seem to locate the layer that these markers are actually part of.
View 4 Replies View RelatedAutoCAD Civil 3D :: Profile Grade Markers
May 22, 2013Why do profile grade markers always reset in section views? This has to have been a wish list item. lsp or software to populate these? I heard in 2014 they still disappear.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram
AutoCAD Civil 3D :: How To Configure Label To Show Two Kilometer Markers
Nov 5, 2013I'm trying to create a label which gives me a distance from the begining of my reference, but coordinates are not good for this because my reference is not linear. It is a alignement with tangents and curves. What I'm trying to figure out is how to create a label with the distance of the projection of the begining point of my feature line in the alignment to the begining of the alignment.
For example: There is a alignment (road) and a feature line (curb). The alignment is the axis of the road and the feature line is an edge of the road (not need to be exactly an offset). How to configure a label to show the two kilometer markers (0.0001 precision) of the road that are the beginning and ending markers of the part of the road that has curb?
AutoCAD 2013 :: Section (plan / Elevation / Section) Snapping To Point Cloud
Nov 1, 2013I'm looking to basically do what this video shows:
[URL]........
I just want to create a section from the point cloud, but the point cloud won't allow me to select it as an object in the 'Generate 2D/3D section' dialogue as it's not a solid/surface.
On an unrelated note, I find snapping to the point cloud impossible - is there an option in OSNAP that I'm missing? I've tried this with attached PCGs and RCP point clouds, no difference.
AutoCAD Civil 3D :: Pipe Section In Full Height In Section Views?
Feb 20, 2013I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedAutoCAD Civil 3D :: Alignment Style - Section - Line Marker In Section
Mar 26, 2012C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views
May 21, 2012When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
AutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section Editor Vs Section Views Labels?
Aug 12, 2013In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedAutoCAD Civil 3D :: Can't See Corridor Section In Section Views Only Existing
Mar 5, 2012I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
AutoCAD Civil 3D :: Corridor Section Editor Not Displaying A Section
Mar 8, 2012I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM