Photoshop :: Change This From Percent To Px?
Aug 7, 2007The transform controls show the width and height in percent, how do I change it to pixels?
View 4 Replies
ADVERTISEMENT
Illustrator :: CMYK Printing / Adding 5 Percent To Other Non 100 Percent Color Channel?
Feb 10, 2013My printer told me to add 5% C 5% M and 5%Y to my 100%k channels as without it I can see the black comes out a little/touch fury on things like small thin text.
Is this the same on all other colors too? Eg. say 100% Cyan color, should I add 5% M, Y and K?
Photoshop :: Change Opacity Of Layer With Semi Transparent Pixels To Hundred Percent
Nov 18, 2011I have a layer with semi-transparent pixels and I want to change there opacity to 100%. Or use some tool to change there opacity gradually by hand.
Is this possible at all in Adobe Photoshop CS5?
CorelDRAW Graphics Suite X6 :: How To Change Size By Percent Of Original
May 1, 2012Recently upgraded from X3 to X6. Just discovered there is no place on the property bar to change the size by entering a percent of original size. It was located next to the actual size in inches.
I did Ctrl-J and tried to find it in the customization, but came up empty. Surely this feature still exists?
Photoshop :: 3D Rendering Using 97 Percent CPU?
Feb 19, 2013know this is probably somewhat of a techy question, but I'm really alarmed at how much CPU 3D rendering uses in PS CS6. My computer just howls! Can I get some tips, apart from the obvious hardware upgrades? Here are my hardware specs for my computer:
Dell Studio XPS, 12GB ram, Intel Core i7 930 2.8 Ghz, GeForce GT 630 4Gb Aside from that, PS also uses over 6GB of memory at times. This also seems extremely high to me ??
Photoshop :: PSD Files Opens At 0.13 Percent
Nov 12, 2012When I open up a psd files they open at 0.13%. Really small. Today they all opened at this size. I'm using CS4 on a Mac Pro running OS 10.7.5. How do I get files to open at 100%.
View 3 Replies View RelatedPhotoshop :: Why Mask Opacity Only About 50 Percent
Oct 21, 2013My masks are all about 50 per cent in opacity lately but I can't see any control or method of making a 100 per cent mask. See above-- The A was masked by a black brush at 100% opacity. The Properties control has opacity set to 100%
View 3 Replies View RelatedPhotoshop :: Photo Restoration At What Percent...
Jul 4, 2006I'm in the process of scanning in old photos and retouching them in Photoshop. I have many books on the subject and have been using Photoshop for 2 years now..
I'm curious as to what percenage are corrections made. When you look at a photo at 25% of the size it looks one way, but when you zoom into 100% it's obviously another.
Photoshop :: CS6 / Zoom To Percent Without Hitting Enter?
Dec 29, 2012Just upgraded to PS CS6, and am having a problem manually entering a value for the magnification level in the status bar (same goes for Navigator panel).Is it supposed to automatically zoom to the amount entered without hitting enter/return? For example, if I want 25%, the box will read 2%5 and tells me my value is invalid by the time I hit return (the document will go to 2% automatically before I hit the 5). I can find nothing on this anywhere online, and the documentation mentions typing a number then having to press enter/return. Is this a feature? A glitch? Can it be disabled/fixed?
I am running a Mac and small Cintiq with an on-screen keyboard (so typing speed is slow and screen area at a premium), and the button on the pen (set to be an 'option' key) sticks on occasion.
Photoshop :: CS6 13.0.1 Update To 13.0.2 - Key Command For Viewing At 100 Percent Gone?
Dec 18, 2012What's happened to the key command for viewing at 100%? It has always been Option/Command/0 and that doesn't work any more with this latest update. The Menu symbol is now a lower case n (which doesn't work) and the only way to view at 100% is to go through the menu. It's slowing me up badly when editing?
View 15 Replies View RelatedPhotoshop :: Brush Opacity Does Not Go Full At 100 Percent
Jul 7, 2013I have a problem whereby my brush does not deliver the full color opacity even at 100%. It only delivers up to 50% (sort of). But I had to stroke twice to get the color that I want. This happens when Transfer option with Opacity Jitter is set to Pen Pressure. Why is this so?
However, Flow Jitter does not seem to have a problem with delivering the full color under Pen Pressure. I'm using a Wacom Intuous 4 Medium tablet.
Photoshop :: Banding At Magnification Lower Than 64 Percent
Mar 24, 2013When I'm viewing photo at zoom lower than 64% banding kicks in. At zoom higher than 63% everything smoothed out. It's giving me a hard time when I'm trying to retouch big files at lower magnification because actually I cant know until I zoom in do I'm removing something what exist or actually not!
I know it's an issue regards do displaying preview of 16bit image as 8bit image. I was checking this in many ways and it appears only in 16bit mode. I'm quite a quality maniac so I always retouch in 16bit mode and ProPhoto color space to give myself a bit more room to play with post production.
Please take a look at snaps made using windows snipping tool. All images are in ProPhoto color space but I also have tried this in RGB and it looks quite the same.
1. With banding.
16bit mode
ProPhoto color space
Zoom: 63%
1. Without banding.
16bit mode
ProPhoto color space
Zoom: 64%
I'm on windows 7 ultimate 64bit, 64GB memory, Intel I7 processor, geforec GTX680 GPU.
Photoshop :: 100 Percent Opaque Brush From Color Image
Oct 13, 2011I want to create a top down view image of a pile of autumn leaves. Something like the attached image.
So how to have an isolated image of a single leaf, create a brush from it, set the brush dynamics to create a random scatter and size of leaves and paint this on a few separate layers to create the impression the leaves are on top of each other.
The problem is since the singe leaf is color and not a simple 100% black silhouette, the resulting brush is transparent. So this is no good for what I need.
Is there a way to create a brush (or some other technique) so I can simply move the mouse across the screen and it will paste full color / 100% opaque copies of the isolated leaf with brush dynamics to create random sized / angled copies of the leaf?
Or is the only way to achieve what I need going to involve making manual copies of the leaf which would take a long time?
Photoshop :: Rotate Word Of Text 90 Percent On Image From Horizontal?
Feb 15, 2013I am trying to put a word of text on an image but I need it to be on a line 90% from horizontal. How do I rotate it?
View 2 Replies View RelatedPhotoshop :: Is Save For Web In JPEG Format Lossless When Quality 100 Percent
Oct 17, 2013From what I can make of it, lossy is the option on GIF files, and therefore I am assuming that the optimisation is lossless for a JPEG at 100 percent quality and lossy when the quality is reduced?I just want to clarify that I am saving images for the web at the smallest size I can without losing too much quality.
All the images I save are 450px wide @ 75 dpi, but vary in length from 800px high to 1500px high, but have to be saved under 100kb. lossless and lossy in JPEG format in save for web?
Photoshop :: Changing Background To Layer - Image Becomes 100 Percent Transparent
Nov 13, 2013I open a jpg image. It becomes "background" and locked in layers panel. I want to edit it so i click in layers panel, and get a box where I can call the layer a name and it changes from background to layer ( in my beginner´s terminology...)
When I click on "Ok" the image disappears, or really i think it becomes transparent, because in layer´s panel it is still visible. What has happened? I have done well all day, and suddenly this happens.
Photoshop CC
W7 64-bitGeForce GTX 570 (331.65 latest)
IntelCore i7 920 @2.67
16 GB RAM
CorelDRAW X4 :: Get CMYK Percent Coverage
Nov 18, 2008I'm looking for a way to get a percent coverage figure for each C M Y and K so I can more closely determine print costs when printed to a CMYK printer where yeilds are given for 5% coverage. I'd like to find a way to take a corel document and determine that when printed this page is approximately 25% black coverage, 4% cyan coverage, 6% magenta coverage, and 2% yellow coverage for example.
View 14 Replies View RelatedXara :: RGB Data Shows As Percent?
Dec 6, 2012I am running Xara Designer Pro X and there is a problem with my RGB-module.
The problem is that I need to have a color with the data R 241 G 145 B 27 (kind of orange).But, when I enter the data the color module converts it to percent (%) and the color is definitely not orange.
How do I make Xara RGB-color module understand that I don't want to use percent?
Paint.NET :: Image Window Not At 100% Percent?
Jan 12, 2013 So the image in my window is not at a 100% and there is a whole lot of white space, it was fine till I added a new layer then it just downsized. Ive attached a photo of what it looks like.
I want my canvas size to be 36X24'' but the last bit is always just white space, which means my image is less than 36 inches long
CorelDRAW Graphics Suite X5 :: Scrolling Calibration - Set Only On 5 Percent?
May 4, 2011I miss scroling calibration ... the jumps between the small movements on my mouse wheel are enormous ... where can I correct it to scroll not in jumps of 50% but only on 5%.
View 8 Replies View RelatedCorelDRAW X3 :: Halftone Printing To HP 5100 - Cannot Get 100 Percent Black
May 25, 2012I finally found a halftone printing solution to my HP 5100 tn, My problem is that if I set an lpi (any), I cannot get 100 percent black no matter what color pallete I use. Everything that should be solid prints at about 90% halftone.
using Windows 7 64 bit, corel X3 with Ghostscript 9.05
AutoCAD Civil 3D :: Surface Percent Slope Labels
May 13, 2013I have surface percent slopes labels in my drawing. I want to change the current style precision to only one decimal not three and I don't want to see the negative in front of the slope value.
View 1 Replies View RelatedPremiere Pro :: Import Function In V6 Won't Work - Crashes 90 Percent Of The Program
Jan 15, 2014I was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline.
View 4 Replies View RelatedAutoCAD Civil 3D :: Slope Percent (%) Label Text Is Not Changing Height
Jul 19, 2013I have slope % angles labeled on a plan, but they are too large. They are 1/8" tall, and I need them to be 3/32" tall. I have checked the style (ROMANS) to be sure the text height is set to 0", and it is. I've also ensured that these labels are on this label style.
Check the screenshot. I added 2 screenshots with a huge difference in font size just to be sure my point gets across. And, I have hit APPLY and closed the window just to be sure. You will see up top, I have it set to 3/32". Actually the text isn't showing right, it is still stuck on 1/8". But, regardless, you can see in the lower screenshot where I have changed it to 3", but the text has not changed.
As a side note, the text on the slope labels should match the height of the contour labels you can see in the screenshots.
AutoCAD Civil 3D :: Slope Analysis Legend To Show Percent Of Range
Apr 16, 2009I am working on creating a surface style, legend and surface settings to create Slope Analysis Maps. These maps show a surface with different colors of hatches in triangles of the surface that are within the specified ranges. I have 3 ranges, 0-10%, 10-20% and 20-100%. I have been able to do everything but include the percentage of the area of the range over the total area of the surface. I thought maybe an expression, but doesn't look like you can have expressions for table styles. Attached is a pdf that shows my legend and a surface with the style.
View 7 Replies View RelatedAutoCAD Civil 3D :: Label Style Text Size As Percent Of Screen (model Space)
Jun 17, 2013I've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
Photoshop :: Quick Brush Size / Hardness Change - Anyway To Change Shortcut?
Apr 27, 2012The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View RelatedPhotoshop Elements :: Can't Change Paper Type / When Try In Change Settings
Jan 6, 2013When I try to print a photo and use "Change Settings" to change from "plain paper" to glossy photo paper nothing happens.
View 3 Replies View RelatedLightroom :: Tethering Import (Auto) Forces Change To DNG - Can't Find Setting To Change
Mar 12, 2013I am trying to set up auto importing by tethered shooting with a Canon 1Ds (but don't think brand and camera matter.)
I never use DNG, and am not aware of, and after a lot of searching, cannot find anywhere in the LR4.3 preferences at which I specified DNG conversion. In the Auto0Import dialog there is a File-handling tab that offers one choice: how to spell the dng suffix. The files I want to import will come in as CR2., and testing this with other folder destinations and with Canon's EOS Utility prove that the camera is "sending" CR2 files.
AutoCAD Inventor :: Change Drawing Scale With ILogic Upon Parameter Change
Jul 8, 2013I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
AutoCAD 2010 :: Change Block Attribute And Apply That Change To Multiples?
Aug 14, 2012i have tons of column tags but wants to change the distance between column size and the circle and make the font smaller. I can do this individually but can't do one by one..... is there any way i can adjust all by one command or one magic touch?
View 3 Replies View Related