What's happened to the key command for viewing at 100%? It has always been Option/Command/0 and that doesn't work any more with this latest update. The Menu symbol is now a lower case n (which doesn't work) and the only way to view at 100% is to go through the menu. It's slowing me up badly when editing?
View 15 RepliesMy printer told me to add 5% C 5% M and 5%Y to my 100%k channels as without it I can see the black comes out a little/touch fury on things like small thin text.
Is this the same on all other colors too? Eg. say 100% Cyan color, should I add 5% M, Y and K?
I just updated to 13.0.4 at the end of last week. Today I went to use the Color Range command and it will not select any colors. The Eyedropper tool works fine. Adjusting the fuzziness and other options doesn't make a difference. Nor does selecting multiple instances of a color to add to the selection. Since I use this command regularly, I feel confident that it is a bug with the update and I would love to hear of any possible fixes. Or, is it possible to downgrade back to 13.0.3? I didn't realize how much I used this and it's a major inconvenience.
View 2 Replies View RelatedI am having a problem with a sketch not updating the parameters when using a "while / end while" command.
Basically if you have a right angled triangle (as attached) with one side and the angle doing the driving then I wish to update the sketch until the last side which is a reference dimension reaches a preset dimension.
I cannot get the updated sketch to read back into the while command to stop when the limit is reached. Instead it goes on an infinite loop until the sketch breaks.
I have used every update under the sun and can get nothing to work.
Trigonometry not an option as this is a basic example of what I wish to achive.
I have seen an example of this working but only for reading the iproperties so dimensions can change until a volume is reached.
is there a command to redefine/update multiple wblock?
View 5 Replies View RelatedI'm looking for an option to keep master or source blocks together in one file that when changes need to be made I can just update them once and those changes reflect immediately in drawings containing said blocks. I had thought that the wblock command was used for this but it seems to just be another way to insert blocks similar to the design center.
View 9 Replies View Relatedknow this is probably somewhat of a techy question, but I'm really alarmed at how much CPU 3D rendering uses in PS CS6. My computer just howls! Can I get some tips, apart from the obvious hardware upgrades? Here are my hardware specs for my computer:
Dell Studio XPS, 12GB ram, Intel Core i7 930 2.8 Ghz, GeForce GT 630 4Gb Aside from that, PS also uses over 6GB of memory at times. This also seems extremely high to me ??
The transform controls show the width and height in percent, how do I change it to pixels?
View 4 Replies View RelatedWhen I open up a psd files they open at 0.13%. Really small. Today they all opened at this size. I'm using CS4 on a Mac Pro running OS 10.7.5. How do I get files to open at 100%.
View 3 Replies View RelatedMy masks are all about 50 per cent in opacity lately but I can't see any control or method of making a 100 per cent mask. See above-- The A was masked by a black brush at 100% opacity. The Properties control has opacity set to 100%
View 3 Replies View RelatedI'm in the process of scanning in old photos and retouching them in Photoshop. I have many books on the subject and have been using Photoshop for 2 years now..
I'm curious as to what percenage are corrections made. When you look at a photo at 25% of the size it looks one way, but when you zoom into 100% it's obviously another.
Just upgraded to PS CS6, and am having a problem manually entering a value for the magnification level in the status bar (same goes for Navigator panel).Is it supposed to automatically zoom to the amount entered without hitting enter/return? For example, if I want 25%, the box will read 2%5 and tells me my value is invalid by the time I hit return (the document will go to 2% automatically before I hit the 5). I can find nothing on this anywhere online, and the documentation mentions typing a number then having to press enter/return. Is this a feature? A glitch? Can it be disabled/fixed?
I am running a Mac and small Cintiq with an on-screen keyboard (so typing speed is slow and screen area at a premium), and the button on the pen (set to be an 'option' key) sticks on occasion.
I have a problem whereby my brush does not deliver the full color opacity even at 100%. It only delivers up to 50% (sort of). But I had to stroke twice to get the color that I want. This happens when Transfer option with Opacity Jitter is set to Pen Pressure. Why is this so?
However, Flow Jitter does not seem to have a problem with delivering the full color under Pen Pressure. I'm using a Wacom Intuous 4 Medium tablet.
When I'm viewing photo at zoom lower than 64% banding kicks in. At zoom higher than 63% everything smoothed out. It's giving me a hard time when I'm trying to retouch big files at lower magnification because actually I cant know until I zoom in do I'm removing something what exist or actually not!
I know it's an issue regards do displaying preview of 16bit image as 8bit image. I was checking this in many ways and it appears only in 16bit mode. I'm quite a quality maniac so I always retouch in 16bit mode and ProPhoto color space to give myself a bit more room to play with post production.
Please take a look at snaps made using windows snipping tool. All images are in ProPhoto color space but I also have tried this in RGB and it looks quite the same.
1. With banding.
16bit mode
ProPhoto color space
Zoom: 63%
1. Without banding.
16bit mode
ProPhoto color space
Zoom: 64%
I'm on windows 7 ultimate 64bit, 64GB memory, Intel I7 processor, geforec GTX680 GPU.
I want to create a top down view image of a pile of autumn leaves. Something like the attached image.
So how to have an isolated image of a single leaf, create a brush from it, set the brush dynamics to create a random scatter and size of leaves and paint this on a few separate layers to create the impression the leaves are on top of each other.
The problem is since the singe leaf is color and not a simple 100% black silhouette, the resulting brush is transparent. So this is no good for what I need.
Is there a way to create a brush (or some other technique) so I can simply move the mouse across the screen and it will paste full color / 100% opaque copies of the isolated leaf with brush dynamics to create random sized / angled copies of the leaf?
Or is the only way to achieve what I need going to involve making manual copies of the leaf which would take a long time?
I am trying to put a word of text on an image but I need it to be on a line 90% from horizontal. How do I rotate it?
View 2 Replies View RelatedFrom what I can make of it, lossy is the option on GIF files, and therefore I am assuming that the optimisation is lossless for a JPEG at 100 percent quality and lossy when the quality is reduced?I just want to clarify that I am saving images for the web at the smallest size I can without losing too much quality.
All the images I save are 450px wide @ 75 dpi, but vary in length from 800px high to 1500px high, but have to be saved under 100kb. lossless and lossy in JPEG format in save for web?
I open a jpg image. It becomes "background" and locked in layers panel. I want to edit it so i click in layers panel, and get a box where I can call the layer a name and it changes from background to layer ( in my beginner´s terminology...)
When I click on "Ok" the image disappears, or really i think it becomes transparent, because in layer´s panel it is still visible. What has happened? I have done well all day, and suddenly this happens.
Photoshop CC
W7 64-bitGeForce GTX 570 (331.65 latest)
IntelCore i7 920 @2.67
16 GB RAM
I have a layer with semi-transparent pixels and I want to change there opacity to 100%. Or use some tool to change there opacity gradually by hand.
Is this possible at all in Adobe Photoshop CS5?
I'm looking for a way to get a percent coverage figure for each C M Y and K so I can more closely determine print costs when printed to a CMYK printer where yeilds are given for 5% coverage. I'd like to find a way to take a corel document and determine that when printed this page is approximately 25% black coverage, 4% cyan coverage, 6% magenta coverage, and 2% yellow coverage for example.
View 14 Replies View RelatedI am running Xara Designer Pro X and there is a problem with my RGB-module.
The problem is that I need to have a color with the data R 241 G 145 B 27 (kind of orange).But, when I enter the data the color module converts it to percent (%) and the color is definitely not orange.
How do I make Xara RGB-color module understand that I don't want to use percent?
So the image in my window is not at a 100% and there is a whole lot of white space, it was fine till I added a new layer then it just downsized. Ive attached a photo of what it looks like.
I want my canvas size to be 36X24'' but the last bit is always just white space, which means my image is less than 36 inches long
i just noticed that there is no manual update file for ACR 7.2. most of our company computers are offline.
how should we update them without a manual update file?
[URL]..........
adobes says the final ACR 7.2 update is available through the CS6 update.well that is of no use when you have offline computers. This update will be released as manual update file too?! any infos?
I miss scroling calibration ... the jumps between the small movements on my mouse wheel are enormous ... where can I correct it to scroll not in jumps of 50% but only on 5%.
View 8 Replies View RelatedI finally found a halftone printing solution to my HP 5100 tn, My problem is that if I set an lpi (any), I cannot get 100 percent black no matter what color pallete I use. Everything that should be solid prints at about 90% halftone.
using Windows 7 64 bit, corel X3 with Ghostscript 9.05
I have surface percent slopes labels in my drawing. I want to change the current style precision to only one decimal not three and I don't want to see the negative in front of the slope value.
View 1 Replies View RelatedWhen transfering images from Lightroom to Photoshop HDR for instance. message says update Camera Raw. Update attempts all come back to 'update server is not in service' --
View 1 Replies View RelatedRecently upgraded from X3 to X6. Just discovered there is no place on the property bar to change the size by entering a percent of original size. It was located next to the actual size in inches.
I did Ctrl-J and tried to find it in the customization, but came up empty. Surely this feature still exists?
I was working on a project in Premiere Pro 6. I had imported about 200 files and almost completed the project. I tried to import another file and the import function would not work. In addition, it disabled about 90 percent of the program. Menu selections had turned grey. I closed the project and program and restarted, opening a much smaller project. Worked OK until I tried to import. The import wouldn't work, and the program was disabled. This is not a case of actually selecting a file to import. The function crashes before you have a chance to actually select a file. On deadline.
View 4 Replies View RelatedI have slope % angles labeled on a plan, but they are too large. They are 1/8" tall, and I need them to be 3/32" tall. I have checked the style (ROMANS) to be sure the text height is set to 0", and it is. I've also ensured that these labels are on this label style.
Check the screenshot. I added 2 screenshots with a huge difference in font size just to be sure my point gets across. And, I have hit APPLY and closed the window just to be sure. You will see up top, I have it set to 3/32". Actually the text isn't showing right, it is still stuck on 1/8". But, regardless, you can see in the lower screenshot where I have changed it to 3", but the text has not changed.
As a side note, the text on the slope labels should match the height of the contour labels you can see in the screenshots.
I am working on creating a surface style, legend and surface settings to create Slope Analysis Maps. These maps show a surface with different colors of hatches in triangles of the surface that are within the specified ranges. I have 3 ranges, 0-10%, 10-20% and 20-100%. I have been able to do everything but include the percentage of the area of the range over the total area of the surface. I thought maybe an expression, but doesn't look like you can have expressions for table styles. Attached is a pdf that shows my legend and a surface with the style.
View 7 Replies View Related