AutoCAD Civil 3D :: Slope Analysis Legend To Show Percent Of Range
Apr 16, 2009
I am working on creating a surface style, legend and surface settings to create Slope Analysis Maps. These maps show a surface with different colors of hatches in triangles of the surface that are within the specified ranges. I have 3 ranges, 0-10%, 10-20% and 20-100%. I have been able to do everything but include the percentage of the area of the range over the total area of the surface. I thought maybe an expression, but doesn't look like you can have expressions for table styles. Attached is a pdf that shows my legend and a surface with the style.
View 7 Replies
ADVERTISEMENT
May 13, 2013
I have surface percent slopes labels in my drawing. I want to change the current style precision to only one decimal not three and I don't want to see the negative in front of the slope value.
View 1 Replies
View Related
Jul 19, 2013
I have slope % angles labeled on a plan, but they are too large. They are 1/8" tall, and I need them to be 3/32" tall. I have checked the style (ROMANS) to be sure the text height is set to 0", and it is. I've also ensured that these labels are on this label style.
Check the screenshot. I added 2 screenshots with a huge difference in font size just to be sure my point gets across. And, I have hit APPLY and closed the window just to be sure. You will see up top, I have it set to 3/32". Actually the text isn't showing right, it is still stuck on 1/8". But, regardless, you can see in the lower screenshot where I have changed it to 3", but the text has not changed.
As a side note, the text on the slope labels should match the height of the contour labels you can see in the screenshots.
View 4 Replies
View Related
Oct 31, 2012
Is there a way to automatically adjust the cut range colours (REDS) in the attached scheme such that the lighter colours denote lower cut depths in the same way that the fill range does (Greens)
I know they can be manually adjusted but when the analysis is run again the colours revert back
(No connection with Autodesk other than using the products in the real world)
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 5 Replies
View Related
Oct 12, 2006
I can not get the slope analysis to come up with 10 slope ranges. My ranges are set to 10, but my Range details populate to 22? Screen Cap included. I've tried this with Equal Interval, Quartile, and Standard Deviation. Nothing will create 10 intervals.
My "slope analysis" surface style is set to show Slope, with the range set to 10. In surface properties, my range is set to 10.
View 9 Replies
View Related
Mar 27, 2012
I need to be able to do a slope analysis on a surface, but I need to have it calculate the slope in a direction - east and north. Any way to do it? Maybe even if there is a quick way to apply slope labels to a surface based on a grid - say the slope from N0.00, E0.00 to N0.00 to E 25.00
View 9 Replies
View Related
Mar 30, 2012
same drawing, two computers both with Civil 3D 2012 SP1.
one computer opens the drawing and the surface analysis by slopes shows perfectly, the othe computer opens same drawing and it shows no slope analysis but everything else. They can even change the style and analysis and can view slope arrows, elevations, etc.
View 2 Replies
View Related
May 10, 2012
Succesfully producing a slope analysis exhibit using LIDAR topographic base information with this version of Civil 3D? I have followed the instructions as best I can and have had no luck. I am using a trial version and this is a big factor in whether or not I will ultimately make the purchase.
View 3 Replies
View Related
Jun 27, 2013
i was wondering is it possible to show slopes or grades on my surfaces , or corridors IN PLAN VIEW ?
View 8 Replies
View Related
Nov 29, 2012
I have a fairly simple corridor, however, I had to modify the alignment, rebuild the corridor and resample cross-sections. Now my right daylight slope won't show up. It shows up in the section viewer, but not the cross-section. I had this problem once before and fixed it, but now I can't remember how I did...I have all targets, sections sampled match corridor sampling etc.
Civil 3D 2012 SP1
Windows 7
View 2 Replies
View Related
May 1, 2012
I have created a road for a pit mine (which is unlike roads I have designed in the past). The road switched back towards itself and I need to daylight the cut slopes to show the limits of the mine/road cut. However, my cut/fill lines are not showing up in my cross-sections, but the plan view is showing the limits of excavation.
I assume this is because my limits are intersecting, from each of the roads, the upper and the lower. How can I get around this, or why are my cross-section lines not showing?
View 2 Replies
View Related
Jan 5, 2012
If I only have sketchup terrain model which I could export to DWG.Am I able to bring that DWG into Autocad MAP 3D to do slope analysis?If not, how should I do? What kind of file type I need? Or I need more information other than a model to do slope analysis in Autocad MAP 3D?
View 3 Replies
View Related
Aug 20, 2012
Can you not perform a slope-slope intercept to place a PVI? Essentially holding the sta and elev of the PVI's directly before and after the PVI of interest and changing the grade in and out so that the sta and elev of the PVI of interest are changed.
View 2 Replies
View Related
Mar 22, 2011
Can't figure out how to match gutter slope to outside lane super subassembly slope. Have super eop targeting a feature line with elevations, but when i check section editor gutter slope doesn't match pavement slope.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 9 Replies
View Related
Jan 22, 2013
i need a shoulder subassembly that varies slope in relation to the lane superelevation slope. i know that i can get a subassembly for the shoulder that will follow the alignment superelevation xml data but in my case i can't use it because we are just adding a shoulder to an existing road. we're not changing the superelevation of the existing road, just milling and overlaying and widening. right now i've created a profile of the outside edge of the shoulder that gives me the correct shoulder slope but whenever i change my centerline profile i have to redo the shoulder profiles which is a real time suck.
View 9 Replies
View Related
Aug 13, 2012
I am in the process of transitioning from land desktop to Civil 3D. I design roads in steep terrain and sometimes need to have my catch (daylight) slopes change. So my question is, how do I change a daylight slope at a specified depth? For example, from the shoulder of the road I want a 3:1 fill slope to a depth of 10 feet than change to a 2:1 slope until it catches the existing surface. Can this be built into a subassembly such that if the fill is less than 10 feet it will daylight correctly at a 3:1 and if the depth is greater than 10 feet then it carries the 3:1 for 10 vertical feet and then changes to the 2:1 until it daylights?
View 9 Replies
View Related
May 18, 2012
How do I get the export parcel ananlysis to show degrees minutes and seconds instead of the default decimal degreees. My direction settings are set to DMS, but I can't see where to change arc deltas...
(running C3D 2012 sp4, Win7 64bit, 8GB)
View 1 Replies
View Related
Mar 14, 2012
How do you enlarge the legend key squares in a display theme style legend? Can you add schedule information to this legend like the total SF of a particular display theme style?
View 1 Replies
View Related
Feb 10, 2013
My printer told me to add 5% C 5% M and 5%Y to my 100%k channels as without it I can see the black comes out a little/touch fury on things like small thin text.
Is this the same on all other colors too? Eg. say 100% Cyan color, should I add 5% M, Y and K?
View 6 Replies
View Related
Jun 9, 2011
I am working with a 3D model, we are using a addon for ACAD which allows us to clip the view port (ie: allows us to look at everything on the drawing but only between certain elevations { for example I could clip my drawing to only view between elevation (Z) 1000 - 1020 })
My question is: Is there any way to have text/Polylines show up even if they are not within the clipping range, specifically we would like to have a grid set up say at 0 elevation, and have it the same grid when we clip through our levels without having to manually copy it to each level we plan on clipping.
View 4 Replies
View Related
Mar 19, 2013
I am using 2013.
I have modelled my surface and have added 'elevations' to my model. When I attempt to add the legend all I get is the top headers; it is not populating the data rows.
View 1 Replies
View Related
Dec 19, 2012
I am working with Autocad Civil 3D 2011. Before upgrading we were using LDD 2007. How to create a symbols legend in C3D. It was easy in LDD but how to create one in C3D.
View 4 Replies
View Related
Sep 2, 2013
I have generated a TIN surface and change the style to "Slope". I want to create a legend for the surface, but the legend has no content, only the header.
View 6 Replies
View Related
Aug 31, 2012
How do you set the view range to show a window with a sill height of 5'-0" and a dog door with a head height of 2' in the same wall on a floor plan view?
View 3 Replies
View Related
Jun 4, 2013
Civil 3D 2010
I posted this in Autocad General but was wondering if I can do something using C3D tables or labels...
Currently we have about 30 sheets where we xref the same construction note and legend. The client is asking us to remove notes that don't apply to each sheet. For example, sheet 1 will not need note 2, 6, 10, 11. Sheet 2 will not need 3, 5, 10, and 11, etc.
Same goes for the legend- they don't want to see something if it does not apply to the sheet.
Other than bringing in those notes and legend into each sheet and modifying it, I can't think of another way to do this. Previously, if I needed to change the wording of note 4, I change it once and I'm done. If I need to change anything now, I will need to open up 20 sheets.
Also, they want to remove the note completely, and not just cover up the note with "Not used this sheet."
View 9 Replies
View Related
Jan 29, 2012
I have been searching around all morning for a way to create a symbol legend in C3D 2012. Is there a way to create a legend of point sysmbols being used with in a dwg? I could do this manually but that could take a while if I have lots of sysmbols.
View 1 Replies
View Related
Jan 22, 2013
We have a Civil 3D surface using contours which are coloured according to the elevation. But when we do a surface legend, and use contours, it just numbers the contours instead of using the colours. Ever created a surface table with the colours of each contour elevation?
View 1 Replies
View Related
Aug 21, 2012
I have created a volume surface and associated surface legend table using the cut/fill parameter.
The volumes and areas don't seem to add up, take Cut 2 as an example only if the area of the previous (cut 1) was added could this be possible. There is lots of speculation in our office like does the fill work in reverse?
View 5 Replies
View Related
Apr 12, 2012
I ma trying to print surface legend table to scale. I changed settings in model space, but I am not able to set it up to scale in layout (paper space).
View 1 Replies
View Related
Jun 17, 2013
I've been tinkering with text sizes in model space and would like to have my point numbers consistent regardless of zoom factor. I can do this in paper space (viewports) as the annotative scale controls the appearance, but for doing analysis of points at various zooms in model space, it would be nice to be able to Regen and have them all come to a certain text size.
I've made some expressions that are modifications of those I use in paper space, but I can't seem to find a function/variable that I can reference for this purpose.
View 2 Replies
View Related
Jun 3, 2013
I am trying to get my roof to show the slope of the tapered insulation layout. See
RoofSlopes.png
This is done with lines currently. When I try to modify the sub elements to get the look I get a bunch of lines that aren't needed and can't seem to remove them. See
RevitRoofSlopes.png
How to have success using the modify sub-elements tool for Roofs? The Wiki help shows rectangles and squares, not every roof has that shape.
View 2 Replies
View Related
