My masks are all about 50 per cent in opacity lately but I can't see any control or method of making a 100 per cent mask. See above-- The A was masked by a black brush at 100% opacity. The Properties control has opacity set to 100%
View 3 RepliesI have a problem whereby my brush does not deliver the full color opacity even at 100%. It only delivers up to 50% (sort of). But I had to stroke twice to get the color that I want. This happens when Transfer option with Opacity Jitter is set to Pen Pressure. Why is this so?
However, Flow Jitter does not seem to have a problem with delivering the full color under Pen Pressure. I'm using a Wacom Intuous 4 Medium tablet.
I have a layer with semi-transparent pixels and I want to change there opacity to 100%. Or use some tool to change there opacity gradually by hand.
Is this possible at all in Adobe Photoshop CS5?
When I make a layer mask and use my brush tool at 100% opacity you can still see some of the image below. It is as though 100% is only 98% or so.
When I merge down the layers the slight opacity shows on the flattened image. actually get 100% opacity?
My printer told me to add 5% C 5% M and 5%Y to my 100%k channels as without it I can see the black comes out a little/touch fury on things like small thin text.
Is this the same on all other colors too? Eg. say 100% Cyan color, should I add 5% M, Y and K?
When I create a channel mask I notice that the mask does not provide complete protection. The masked area is partly affected by the brush.
I figure that there must be an opacity setting somewhere that's not 100 percent but I can't find it.
Anybody know where that is?
A problem has developed in my photoshop CS 6 64 bit on windows 7. I can't paint at full opacity in a layer mask. It is like an 75 % opacity brush. I have gone back to the default brushes soit is not the particular bursh. My brush settings are all at 100%, mask density is 100% , the blend mode is normal,-can't think of where else to look for the solution.The brush works just fine when I am not in a layer mask.I updated the graphic card driver and also the wacom intuos driver. It has to be somewhere in photoshop CS6 as when I go into my older version photoshop, cs5, the mask opacity works works at 100 % opacity.
View 6 Replies View RelatedMacbook
OS X lion
AI CS5
I created this logo in Illustrator. I made my basic shapes with a pen tool, put a vector grunge texture over the top of the shapes and then used "make opacity mask" to get my grunge effect. As you can see in the screenshot of my illy it is all very clean and looking like it should. When you open my other picture you can see that once I transferred (cmd+copy cmd+paste) the logo into PS you can now see faint lines of where the shapes used to be *highlighted in red*. I also tried placeing the .ai file in ps but got the same effect. I am using all pantone colors on the logo, both documents are set to 300 dpi....err I cant think of anything else. PS is in RGB, Illustrator is in CMYK (but using Pantone)
How do I get my logo to look as good in PS as it does in Ilustrator?
In CS6 I created a clipping mask with an image above a type layer, and when I lower the opacity of the image layer, it starts turning the color of the text green? Why is this?
1. How could I lower the opacity of the image inside the text?
2. The same thing happens when I try to change the blending of the clipping mask with the text layer beneath it. Why is turning green?
I use a simple opacity mask on some equally simple (but large) artwork. It slows down the screen rendering so much as to make the file almost unworkable with the preview turned on.
View 1 Replies View RelatedSo, I'm having trouble with CS6 Ai and the artwork link with the Opacity Masks...for instance, I have placed a black-white image that I am using as a "grunge effect" mask over a group within my artwork. The problem I am having is that when I do one of two things (move the artwork itself or copy/paste the artwork into another file) the mask does not remain. I have the little link selected on the opacity mask that says "Link to artwork". I also tried "Expanding" the artwork to no avail. Am I missing a setting or something that would allow me to "finalize" a piece of artwork that has an opacity mask applied so that I can use it elsewhere?
I opened Ai on my office computer and tried an opacity mask and it worked as far as moving the artwork around within the same artboard. But, if I copy and paste the artwork to a new Ai file, the mask does not remain. Is this normal?
I'm trying to apply an opacity mask to multiple layers (which happen to be contained within a Layer Mask). When I make the Opacity Mask, it takes all of the stuff on different layers and compresses them to a single layer (see attached images). I would like to keep the data on their assigned layers for later editing. I've done this before, but I have a feeling I have a setting or pref de-selected somewhere. Could the layer mask be the culprit?
View 6 Replies View RelatedI'm in the process of drawing a site plan which contains buildings, roads and wooded areas. I want to draw roads which go through the wooded areas. I want both the road and the woods to be opaque except where the woods overlaps the road (I want the wood to be partially transparent at the overlap). Example of the effect I want is shown below. I don't get this effect when trying to use blending transparency modes. I'm sure it can be done with the opacity mask but I've tried all sorts of combinations and not managed to get this effect.
View 9 Replies View RelatedI am looking for a way to create an opacity mask through JavaScript. My program has the correct items selected, I just can't seem to find any documentation about creating an opacity mask. If I run the program as is, I just need to click one button ( "Make Mask") and the desired process is completed. Of course I would love to find a way to do this programmatically.
If I cannot access Opacity mask, is there a way to manually do this through grouping and blending or something?
I'm using AI CS6;
I have a type object with an opacity mask created in one document. When I copy and paste this object into a new file the text is pasted without the opacity mask attributes. I can separately copy and paste the opacity mask object but then I face a tricky realignment to repeat.
I'm trying to resize a opacity mask by doing
transMaskItem.resize(
10, //scaleX,
10, //scaleY,
true, //[,changePositions]
true, //[,changeFillPatterns]
true, //[,changeFillGradients]
true, //[,changeStrokePattern]
0.1, //[,changeLineWidths]
)
This resizes the item, but it does not resize the item inside it. I tried similar command with the translation command
transMaskItem.translate(
100, //([deltaX]
100. //[,deltaY]
True, //[,transformObjects]
True, //[,transformFillPatterns]
True, //[,transformFillGradients]
True, //[,transformStrokePatterns])
and similar thing happened. The item gets moved, but the object inside it doesn't.
How do I resize or translate an opacity mask along with the items inside it?
I have two layers. Upper most with text is locked.Bottom layer is an image I have applied a transparency/gradient mask for the raster image. Now, seems my layers palette is stuck in a mode called 'Layers (Opacity Mask)'.Not seen this before, but this is CS6. How do I get out to the main, root level of the layers palette?
View 1 Replies View RelatedIt does it every 4-6 times which is really really often since you brush about 10 times every 3 seconds or so when digital painting especially when shading, lighting, blending, etc with brushing.
Why does it do this? I cant recall when it started doing this but I think it was either when I updated from CS4 to CS6 or maybe it just randomly kicked in. I already updated my drivers and re-installed my tablet.
In the animation I am working on, I need an object to instantly go from 100% opacity to 0% opacity. The problem is, even if you use the opacity of the layer as a keyframe, the object will not instanlty vanish, even if it is only on for the timeruler for a quick amount of time.
I need a tool that will drop from 100% opacity to 0% instantly.
know this is probably somewhat of a techy question, but I'm really alarmed at how much CPU 3D rendering uses in PS CS6. My computer just howls! Can I get some tips, apart from the obvious hardware upgrades? Here are my hardware specs for my computer:
Dell Studio XPS, 12GB ram, Intel Core i7 930 2.8 Ghz, GeForce GT 630 4Gb Aside from that, PS also uses over 6GB of memory at times. This also seems extremely high to me ??
The transform controls show the width and height in percent, how do I change it to pixels?
View 4 Replies View RelatedWhen I open up a psd files they open at 0.13%. Really small. Today they all opened at this size. I'm using CS4 on a Mac Pro running OS 10.7.5. How do I get files to open at 100%.
View 3 Replies View RelatedI'm in the process of scanning in old photos and retouching them in Photoshop. I have many books on the subject and have been using Photoshop for 2 years now..
I'm curious as to what percenage are corrections made. When you look at a photo at 25% of the size it looks one way, but when you zoom into 100% it's obviously another.
Just upgraded to PS CS6, and am having a problem manually entering a value for the magnification level in the status bar (same goes for Navigator panel).Is it supposed to automatically zoom to the amount entered without hitting enter/return? For example, if I want 25%, the box will read 2%5 and tells me my value is invalid by the time I hit return (the document will go to 2% automatically before I hit the 5). I can find nothing on this anywhere online, and the documentation mentions typing a number then having to press enter/return. Is this a feature? A glitch? Can it be disabled/fixed?
I am running a Mac and small Cintiq with an on-screen keyboard (so typing speed is slow and screen area at a premium), and the button on the pen (set to be an 'option' key) sticks on occasion.
What's happened to the key command for viewing at 100%? It has always been Option/Command/0 and that doesn't work any more with this latest update. The Menu symbol is now a lower case n (which doesn't work) and the only way to view at 100% is to go through the menu. It's slowing me up badly when editing?
View 15 Replies View RelatedWhen I'm viewing photo at zoom lower than 64% banding kicks in. At zoom higher than 63% everything smoothed out. It's giving me a hard time when I'm trying to retouch big files at lower magnification because actually I cant know until I zoom in do I'm removing something what exist or actually not!
I know it's an issue regards do displaying preview of 16bit image as 8bit image. I was checking this in many ways and it appears only in 16bit mode. I'm quite a quality maniac so I always retouch in 16bit mode and ProPhoto color space to give myself a bit more room to play with post production.
Please take a look at snaps made using windows snipping tool. All images are in ProPhoto color space but I also have tried this in RGB and it looks quite the same.
1. With banding.
16bit mode
ProPhoto color space
Zoom: 63%
1. Without banding.
16bit mode
ProPhoto color space
Zoom: 64%
I'm on windows 7 ultimate 64bit, 64GB memory, Intel I7 processor, geforec GTX680 GPU.
I want to create a top down view image of a pile of autumn leaves. Something like the attached image.
So how to have an isolated image of a single leaf, create a brush from it, set the brush dynamics to create a random scatter and size of leaves and paint this on a few separate layers to create the impression the leaves are on top of each other.
The problem is since the singe leaf is color and not a simple 100% black silhouette, the resulting brush is transparent. So this is no good for what I need.
Is there a way to create a brush (or some other technique) so I can simply move the mouse across the screen and it will paste full color / 100% opaque copies of the isolated leaf with brush dynamics to create random sized / angled copies of the leaf?
Or is the only way to achieve what I need going to involve making manual copies of the leaf which would take a long time?
I am trying to put a word of text on an image but I need it to be on a line 90% from horizontal. How do I rotate it?
View 2 Replies View RelatedFrom what I can make of it, lossy is the option on GIF files, and therefore I am assuming that the optimisation is lossless for a JPEG at 100 percent quality and lossy when the quality is reduced?I just want to clarify that I am saving images for the web at the smallest size I can without losing too much quality.
All the images I save are 450px wide @ 75 dpi, but vary in length from 800px high to 1500px high, but have to be saved under 100kb. lossless and lossy in JPEG format in save for web?
I open a jpg image. It becomes "background" and locked in layers panel. I want to edit it so i click in layers panel, and get a box where I can call the layer a name and it changes from background to layer ( in my beginner´s terminology...)
When I click on "Ok" the image disappears, or really i think it becomes transparent, because in layer´s panel it is still visible. What has happened? I have done well all day, and suddenly this happens.
Photoshop CC
W7 64-bitGeForce GTX 570 (331.65 latest)
IntelCore i7 920 @2.67
16 GB RAM
How do I do this in CS4?
View 9 Replies View Related