when i press the 3d column in photoshop cs6 there should be a "new shape from layer" option. but it isnt. where can i find that option? could it be because i use a trial version?
View 6 Repliesis it possible to create a donut shape with 1 shape layer (multiple groups)? I can't figure out how to subtract out the hole. I see that there's some blend modes, but no stencil alpha.
Must I use 2 shape layers and track matte, or multiple solids/masks?
In PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
trying to upgrade my PS skills and working thru a PS CS book. I am working on a Layer session. The books shows a column that they call Layer Link mode. I is just to the right of the Visibility column.
View 4 Replies View RelatedSince the release of Photoshop CC the "Live Shape Properties" has basically chosen when it does and does not want to show up.... sometimes I even create a new shape to replace the old one and it STILL does not show the live shape properties... how hard is it to make sure the options are available at all times? I opt for a discount since this is a half working application and the features you highlighted barely function...
View 1 Replies View RelatedHow do I mowe a shape on shape layer A to shape layer B?
View 1 Replies View RelatedI can't figure out how I can use a text or shape layer as a mask for the layer below. See the example attached and you will know what I mean. (I created the example with simply cutting out the text outline from the white box).
I need the text to be a mask and I need it to be editable as text. Don't know if this is possible, experimented with clipping masks but I cant make it work.
When I create a shape in Photoshop CS6, it brings up a nice panel of options - allowing me to change radius, stroke style, colour etc. However, once this shape has been placed in the Photoshop document, I am not able to edit it, without creating a new shape.
I cannot change any of the options. Sure, I can select it and change the size - but how would I change the shape stroke colour and style, as well as the radius of the curves?Is there an option or panel which I need to activate to get back to this menu for the current shape?
Here the shape options are visibleHowever, once I click off the shape - they dissapear and I can no longer get them back.
How would I get the shape options back for this shape, without creating a new layer and shape?As with the way it is now, I have to get things like the stroke colour and radius right the first time - and I like to experiment with my options.
CS2
PSD
WINDOWS
How can I select a shape on a layer in PSD in the layers palette?
In my past version of PSD, I was able to simply click on the Layer and hold either select or control to have marching ants go around my image - but with CS2 I am not able to do that.
I can create structural column schedule but i cant create for architectural columns.i wonder that i do something wrong or simply i cant be done?
View 1 Replies View RelatedMost annoying thing, the VP Freeze and New VP Freeze columns in the Layer Properties Manager keep resetting themselves to original position. I've done all the proflie stuff, re-save it after changing it, re-load it when I find the error, etc.. and still it reverses every time I restart AutoCAD.
What is it with the columns in dialog boxes? I've posted how the column widths in the File Dialog box reset everytime too. How they don't follow windows folder options. Is this some Windows issue or AutoCAD issue?
In Bill of material i have custom PartQty column and is beside QTY column. I need all informations from QTY column to PartQty column to copy. Possible with iLogic? I'm selecting now manualy copy and paste but it would be nice to have automatic.
View 9 Replies View RelatedI have a problem inserting the slanted columns when I use the "Beam/Column joints" commando. When I insert the slanted column, the beams are divided.
It should look like picture 1, but it always ends up as image 2. How can I solve this?
Is it possible to creat a selection with scissors for example and then drag that shape somewhere else to cut it there.
I need to cut a piece of wall in a difficult shape inbetween things. so thats why i want top creat that difficult shape and then cut it from the wall.
Or am I getting it totally wrong and should i try another method?
my drawing file , have block name 'column' but i want to change name from column to new column.
View 2 Replies View RelatedA link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.
I made holes on the edges of the film, I'm trying to cut them out of the layer so they will be transparent, IE: If its laying on a red wallpaper, the holes will show red etc. How do I do this?
View 1 Replies View RelatedI have a rectangle with a gradient on it. I want to be able to cut it in half so its like a horizontal tab. How do I just cut a shape from a layer? I have tried marqee tool selecting the area and then hitting delete but the whole layer disappears :-(
I know this is possible I just dont know how... I would like it so that after the cut everything is removed apart from the shape (i.e. no white space) so that I can move it around...
I am trying to publish to the CC a guide rail. The vendor of the rail gives me the option of entering the desired length of the rail. After that he gives me the option to choose between the length that I entered and a shorter and longer standard length witch can be delivered faster.
I want to do the same thing with my published part, but I cannot make a key parameter to change depending on the entered custom parameter. I want the user to make the next steps when inserting from the CC: 1- select the size of the rail; 2-select the type of the rail; 3- enter the desired length of the rail; 4- choose between the desired length and the 2 recommended lengths (I need these 3 lengths to be shown)
Is this possible?
How do I create a blank layer to be used as my "Background Layer" in CS6? I need to do this action before importing anything because once an image is imported, the image is automatically set as the Background Layer.
View 3 Replies View RelatedI need an easy way to fix a high contrast image such as an interior home shot where the windows are blown out and you can't see outside detail,but the interior is either correctly exposed or is underexposed. Basically what i need to do is combine the correctly exposed interior with the correctly exposed windows, showing correct exposure for both interior and exterior detail. To get the correct exposure i have been taking a shot in which i meter the windows, and without moving the camera, take another shot in which i meter the interior.
Here is where i get stuck. the way i've been doing it, which takes way too much time for my purposes, is to either use the magnetic lasso tool or the polygonal lasso tool to select the area of the properly exposed windows, and then cut and paste the selections to the other layer. The problem with this is,
it takes quite a while and i usually have to go back and do some cloning around the edges to fill in the spots that got missed, which takes alot of time as well, because it usually takes me several tries to get it right. Is there an easier way?
I wanted to add a wheel shape on the image.. What i am doing is.
1. I open old paper background image in adobe photoshop cs6.
2. I click on new layer
3. Then I select the custom shap tool and then select the required shape.
Challenge that I am facing : When I draw a shape in new layer , it also created in background image means it creates two shapes one in new layer and 2nd in the back ground...
shape should not be made in the background image.
I'm demo-ing Photoshop CC, and I came across an unexpected behavior when opening a CS6 PSD.
I have a shape layer that is composed of closed curves which use the path operation "Intersect Shape Areas." In CS6, I added a layer style with a tight gradient that is vertically positioned to show a certain part of the gradient, and the gradient seems to be confined to only the visible intersection of the paths.
In CC, however, the gradient seems to be applied to the entire region of the paths, and not just the intersection - as if there were no path operation performed. Here's an image to show what I mean:
The only way I could reproduce the desired effect in CC was to merge the shape components. But, I'd rather be able to keep the shapes editable at a boolean level.
Unless PS has been updated to make this a feature, i may have found a bug. Now (in CS6 vs. previous versions) when you duplicate a shape layer, if you had previously selected specific points of the shape (for example with the direct selection tool) only those points will be duplicated in the new layer. This is true no matter what tool you are currently using.
What I did was make a rounded-corner rectangle shape -> then direct selected all points on one side to stretch the rectangle without distorting the rounded corners -> then switched to the move tool so no points were selected anymore and only the layer was selected-> duplicate layer (with the intention of duplicating the whole shape). what i got was just the rounded corners on a new layer.
It seems the only way to duplicate the shape layer in its entirety is to go back with the direct select tool -> select ALL points of the whole shape -> change to move tool -> dupe layer.
If that's the intended new functionality, it's a bummer because if you intend to only duplicate certain points, you can already do that while using the direct select tool. Using the move tool, it shows no direct selections and therefore you should be able to duplicate the whole layer.
Maybe I have some weird default option checked that I'm not familiar with? This is not how any previous versions of PS worked and will add friction to my workflow if this is new.
I've brought this up before and didn't get an answer but now that my project is hundreds of layers big and using 12 layer comps, this is becoming increasingly annoying and affecting my project flow:
When will the issue be resolved where when you duplicate a shape layer that has previously had specific anchor points selected (but that none are currently selected since the entire layer is selected in the layers pallete and I am using the move tool, not direct select tool), it duplicates only the previously selected points.
It's a huge waste of precious time to have to:duplicate a layer. realize that only a portion of the layer got duplicated.delete that new layer select the original layer choose the direct select tool click on shape to show the anchor pointshit escape so all points are deselected then try again
I just realized that a Shape Layer is the same thing as a Fill Layer which has a Vector Mask. Or that's how it looks anyway. What's the difference?
View 3 Replies View RelatedWhen I apply a gradient to a shape layer, the gradient is always applied as a rectangle.
e.g.
The red rectangle implies the edges of the gradient. It's a horizontal gradient.What I'm after is for the gradient to be applied in a way that uses the shape layer for the edges... so the same value will be applied evenly to the left side of the shape and then spread evenly to the right. Is this possible?
I made a line with the pen tool but now I can't find out which layer it is on, and I can't stroke it as I wanted. All of my layers are turned off and the shape still appears. However on searching through the layers there is no vector layer which contains my line. Also, I can't stroke the line as the stroke and fill options are greyed out on my paths panel.
I am using CS2 on Windows 7.
I have a layer in which I want to crop it-after the cropping I want this layer to have a specific shape-the shape I intend to use is not from the custom shapes list.
Actually it is a type layer.
So I want to use this type layer and with it crop another shape layer, so the latter, takes the form of the later.
How am I going to achieve the above-I tried with a clipping mask but could not do it.
Everytime I want to use the 3D Mode on Photoshop CS5 Extended, the one option the I need is disabled.
My videocard can handle the graphics. So that is not the problem.The one that I need is "New Shape From Layer". The "New 3D Postcard From Layer" and the "New Mesh From Grayscale" are usable.