I made a line with the pen tool but now I can't find out which layer it is on, and I can't stroke it as I wanted. All of my layers are turned off and the shape still appears. However on searching through the layers there is no vector layer which contains my line. Also, I can't stroke the line as the stroke and fill options are greyed out on my paths panel.
I am using CS2 on Windows 7.
In PS i can Magic wand selection shape from one layer, drop to sub layer and copy that selected shape from that sub layer. How do I do this in illistrator, and moreover, from multiple layer at the same time.
For instance, in PS = Import an image of gold - select a text phrse with wand - drop to gold - copy paste = gold text.
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
How do I mowe a shape on shape layer A to shape layer B?
View 1 Replies View RelatedI just installed CD on my daughter's computer and her shape tool only allows for a free form selection by following the cursor in a free form way. My install allows for a rectangular click-and-drag type of selection. I see no options for this tool Is her install bad?
View 5 Replies View RelatedI can't figure out how I can use a text or shape layer as a mask for the layer below. See the example attached and you will know what I mean. (I created the example with simply cutting out the text outline from the white box).
I need the text to be a mask and I need it to be editable as text. Don't know if this is possible, experimented with clipping masks but I cant make it work.
When I create a shape in Photoshop CS6, it brings up a nice panel of options - allowing me to change radius, stroke style, colour etc. However, once this shape has been placed in the Photoshop document, I am not able to edit it, without creating a new shape.
I cannot change any of the options. Sure, I can select it and change the size - but how would I change the shape stroke colour and style, as well as the radius of the curves?Is there an option or panel which I need to activate to get back to this menu for the current shape?
Here the shape options are visibleHowever, once I click off the shape - they dissapear and I can no longer get them back.
How would I get the shape options back for this shape, without creating a new layer and shape?As with the way it is now, I have to get things like the stroke colour and radius right the first time - and I like to experiment with my options.
CS2
PSD
WINDOWS
How can I select a shape on a layer in PSD in the layers palette?
In my past version of PSD, I was able to simply click on the Layer and hold either select or control to have marching ants go around my image - but with CS2 I am not able to do that.
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI made holes on the edges of the film, I'm trying to cut them out of the layer so they will be transparent, IE: If its laying on a red wallpaper, the holes will show red etc. How do I do this?
View 1 Replies View RelatedI have a rectangle with a gradient on it. I want to be able to cut it in half so its like a horizontal tab. How do I just cut a shape from a layer? I have tried marqee tool selecting the area and then hitting delete but the whole layer disappears :-(
I know this is possible I just dont know how... I would like it so that after the cut everything is removed apart from the shape (i.e. no white space) so that I can move it around...
I wanted to add a wheel shape on the image.. What i am doing is.
1. I open old paper background image in adobe photoshop cs6.
2. I click on new layer
3. Then I select the custom shap tool and then select the required shape.
Challenge that I am facing : When I draw a shape in new layer , it also created in background image means it creates two shapes one in new layer and 2nd in the back ground...
shape should not be made in the background image.
I'm demo-ing Photoshop CC, and I came across an unexpected behavior when opening a CS6 PSD.
I have a shape layer that is composed of closed curves which use the path operation "Intersect Shape Areas." In CS6, I added a layer style with a tight gradient that is vertically positioned to show a certain part of the gradient, and the gradient seems to be confined to only the visible intersection of the paths.
In CC, however, the gradient seems to be applied to the entire region of the paths, and not just the intersection - as if there were no path operation performed. Here's an image to show what I mean:
The only way I could reproduce the desired effect in CC was to merge the shape components. But, I'd rather be able to keep the shapes editable at a boolean level.
Unless PS has been updated to make this a feature, i may have found a bug. Now (in CS6 vs. previous versions) when you duplicate a shape layer, if you had previously selected specific points of the shape (for example with the direct selection tool) only those points will be duplicated in the new layer. This is true no matter what tool you are currently using.
What I did was make a rounded-corner rectangle shape -> then direct selected all points on one side to stretch the rectangle without distorting the rounded corners -> then switched to the move tool so no points were selected anymore and only the layer was selected-> duplicate layer (with the intention of duplicating the whole shape). what i got was just the rounded corners on a new layer.
It seems the only way to duplicate the shape layer in its entirety is to go back with the direct select tool -> select ALL points of the whole shape -> change to move tool -> dupe layer.
If that's the intended new functionality, it's a bummer because if you intend to only duplicate certain points, you can already do that while using the direct select tool. Using the move tool, it shows no direct selections and therefore you should be able to duplicate the whole layer.
Maybe I have some weird default option checked that I'm not familiar with? This is not how any previous versions of PS worked and will add friction to my workflow if this is new.
I've brought this up before and didn't get an answer but now that my project is hundreds of layers big and using 12 layer comps, this is becoming increasingly annoying and affecting my project flow:
When will the issue be resolved where when you duplicate a shape layer that has previously had specific anchor points selected (but that none are currently selected since the entire layer is selected in the layers pallete and I am using the move tool, not direct select tool), it duplicates only the previously selected points.
It's a huge waste of precious time to have to:duplicate a layer. realize that only a portion of the layer got duplicated.delete that new layer select the original layer choose the direct select tool click on shape to show the anchor pointshit escape so all points are deselected then try again
I want to use the Burn and Dodge tools to create Shading and Highlights...However, I need a Rounded shape selection for the ... uhhh "grooves" between the prongs in order to dodge and burn precisely
To my dismay the Marquee tools don't have a Rounded Rectangle nor could I find a way to set the corner radius of the Marquee Rectangle..The Lasso doesn't allow me to create what I need and even if I could use it to make it just right I couldn't make it exactly the same three different times.
I'm trying to fill a shape with the pen tool as I have plenty of times, but I must've accidentally hit something, because now when I tell it to fill, nothing happens. It says it's filled, but no change is visible.
View 7 Replies View RelatedI have photoshop CC (CS7) and when i want to draw a forme or a shield they told me :" impossible d'utiliser l'outil de forme personnalisé en raison d'une erreur du programme" i can't do anything with potoshop
View 7 Replies View Relatedhave a layer, i used shape tool to create an ellipse
i am trying to get color in that shape
I was using the custom shape tool (say I want to make a star) and in my other version of PS (7), it would automatically create a new shape layer, linked where you could click and change the color, etc.
When I try it in CS2 it draws the shape on the background directly. Now I am able to create a new layer, draw the shape and then fill it with a color to get the same result - but it was much easier the other way. I'm assuming it's just a setting (much like the changed linked layers setting)
when i press the 3d column in photoshop cs6 there should be a "new shape from layer" option. but it isnt. where can i find that option? could it be because i use a trial version?
View 6 Replies View RelatedI just realized that a Shape Layer is the same thing as a Fill Layer which has a Vector Mask. Or that's how it looks anyway. What's the difference?
View 3 Replies View RelatedWhen I apply a gradient to a shape layer, the gradient is always applied as a rectangle.
e.g.
The red rectangle implies the edges of the gradient. It's a horizontal gradient.What I'm after is for the gradient to be applied in a way that uses the shape layer for the edges... so the same value will be applied evenly to the left side of the shape and then spread evenly to the right. Is this possible?
I have a layer in which I want to crop it-after the cropping I want this layer to have a specific shape-the shape I intend to use is not from the custom shapes list.
Actually it is a type layer.
So I want to use this type layer and with it crop another shape layer, so the latter, takes the form of the later.
How am I going to achieve the above-I tried with a clipping mask but could not do it.
Everytime I want to use the 3D Mode on Photoshop CS5 Extended, the one option the I need is disabled.
My videocard can handle the graphics. So that is not the problem.The one that I need is "New Shape From Layer". The "New 3D Postcard From Layer" and the "New Mesh From Grayscale" are usable.
I've unlinked the layer mask from the shape layer, and made sure the layer mask thumbnail is selected in the layers palette.
If I do a cmd-t on OSX to transform, Photoshop (CS6) selects the shape layer path to transform instead of the mask layer, even though the mask thumbnail is still selected and even if I have a marque selection.Is this a bug?
I have a photograph as my background layer, and then a shape layer on top of that. I want to put a font layer on top of the shape, select the font, and then delete the selection on the shape layer, so whenever I hide the font, the photograph shows through the shape, but every time I do it, no matter the tolerance, the font that is in the shape looks pixelated. I've reset all of my settings, but I'm not sure what to do.
View 3 Replies View RelatedI need to create a bleed around an object that is cut out on it's own layer. Basically I need a shape burst... the edge pixels expanding outward away from the layer. I know I could enlarge the layer but that doesn't work with more complex shapes. And I don't want to use the rubber stamp tool. I have lots of images to do. The end result does not need to be detailed at all, it will be blurred. How to create this other than rubber stamp?
View 9 Replies View RelatedPS 3d WILL NOT handle a standard 3d shape as a layer in a bigger file. If, for example, the surface of a simple cylinder is filled with a color and the file saved (so that the bigger 3d drawing/file/image will update) PS 3D crashes EVERY SINGLE TIME. That is not all. In general the program crashes about as often and unpredicatably as Windows 3.
The machine has 24G of RAM and can see about 16T of hard drive. nvidia 4000 card. Latest driver. Turning off the GPU does not eliminate the crashes. PS 3d gets totally confused and crashes when network connections are exercised so I don't do that. Win7. VERY FRUSTRATING. Makes the program useless. Adobe software updates all current.
I'm trying to make a compound shape by copy/pasting a shape into the same layer and using Add to Shape area...
the regular copy/paste commands aren't working and it needs to be in the same layer so Duplicate Layer won't do it...
I'm trying to make a compound shape by copy/pasting a shape into the same layer and using Add to Shape area...
the regular copy/paste commands aren't working and it needs to be in the same layer so Duplicate Layer won't do it...