How do I create a blank layer to be used as my "Background Layer" in CS6? I need to do this action before importing anything because once an image is imported, the image is automatically set as the Background Layer.
View 3 RepliesI'm looking to create a thin grey striped layer to use as a background in Photoshop. I need it cover an entire A4 sized page, so some way that allows me to do it easily in one go.
View 9 Replies View RelatedI have a large psd. The bottom most Layer can be a background layer is it possible to flatten just this layer to make is a background layer as this may make the file size smaller. Im working in PH5 on a Mac.
View 2 Replies View Relatedthis is my problem:
Pic 1. I have an image I want to use as a background, however the image is not complete. I need a part of pic 2 to fullfill it.
Pic 2. The colors around the object doesn't match the colors of Pic 1.
Normally it would be best to cut the object out. However in this case it wouldn't look nice (the object is mixed out (in color) with the rest of the image). If I cut out something the object won't look "proper".
My question:
How can I blend pic 2 on pic 1, using the original object from pic 2 (as it is), and at the same time blend the colors around it, so that it matches that of pic 1 / or simply remove it somehow?
Thought this was a Photoshop problem. When I select a portion of an image in Photoshop (which has come from Lightroom) and press Delete, it no longer brings up the Fill dialog; it just deletes the pixels.
After some discussion on the Photoshop forum, I see that now, when I tell Lightroom "Edit in Photoshop", it creates a file which does not have a Background layer, and this causes the Delete key to act differently. This was not the case several weeks ago, but has just started to happen. Is there any adjustment I can make to the "Edit In" settings to get a Background layer in Photoshop?
I want the bottom layer to be the background layer, but I can't figure out how to convert it. I'm running CS3, FYI.
View 6 Replies View RelatedEvery time I import / open a new image in Photoshop CS5 will be provided automatically to a background layer. Is it possible to change it so that the layer is a common and editable layers from the start?
View 4 Replies View RelatedWhen you open an image with adjustment layers, what determines what is selected, the background or the adjustment layer? It seems sometimes it's one or the other, and I don't know the logic. Personally I would prefer that the image always opens with the background layer selected.
View 5 Replies View Relatedway to fade a layer into the background layer to make it seam like it was part of that photo?
example: putting a face from one photo onto the body of a person in a sep. photo
A link or a brief explanation of"when & why" and "how to use" a master layer when working with a multi - layered image (psd or psb) file in CS6.
I've seen a couple of tutorials that make use of a "master layer" but I don't understand the "when & why.
I need an easy way to fix a high contrast image such as an interior home shot where the windows are blown out and you can't see outside detail,but the interior is either correctly exposed or is underexposed. Basically what i need to do is combine the correctly exposed interior with the correctly exposed windows, showing correct exposure for both interior and exterior detail. To get the correct exposure i have been taking a shot in which i meter the windows, and without moving the camera, take another shot in which i meter the interior.
Here is where i get stuck. the way i've been doing it, which takes way too much time for my purposes, is to either use the magnetic lasso tool or the polygonal lasso tool to select the area of the properly exposed windows, and then cut and paste the selections to the other layer. The problem with this is,
it takes quite a while and i usually have to go back and do some cloning around the edges to fill in the spots that got missed, which takes alot of time as well, because it usually takes me several tries to get it right. Is there an easier way?
I open something with paint and then I do crop and copy the area. Then I open up another document and paste it. Now I am trying to blend it in. I think I can use layers. Create a new layer, then add a layer mask. Then, at least that's how I have seen it online, I can use the brush tool to make the background reappear around the letters ( letters in my case). But this does not work. The brush only paints it in the background color.
View 9 Replies View Relatedway to do this from the layers menu (ctrl-click new layer icon), but is there a key combo? I use shift-ctrl-n a lot to make new layers, but often I need to make a new layer *below* the current layer.
View 1 Replies View RelatedRecently my Photoshop has decided that it no longer likes Background Layers so every time I open a jpg file in Photoshop CS6 it opens the file as a layer instead of a bakcground layer.
It's a small issue but when you are working with 100+ photos that need a quick edit and save it becomes incredibly annoying to have to reset the file type I want to save to or adjust the layer back to a background layer with each photo. When I'm doing it once or twice it's no big deal but those extra few steps become time consuming when I work in bulk and I work on a tight deadline.
It's only doing it with some files. Mostly the newer ones. Any older jpgs I open are fine but anything new is opened as a regular layer.
Is there some sort of setting I accidentally clicked without realising it? Because I have looked everywhere I can think of and fiddled with settings all over the place but something missing.
I'm currently using AutoCAD LT 2012 and when I create a new layer and set it as current in the layer manager, regardless of what color I set the new layer to, the new layer's color remains the same as the previous one in the properties box even though the colors of the layers are always set to "by layer."
View 3 Replies View RelatedWhen opening a photo in CS-5, all I get is a blank layer. Navigator shows the photo that I opened.
View 1 Replies View RelatedI need to move an image into a new layer.
View 1 Replies View RelatedBut keep another layer out of the video
i.e. i have 2 layers
1 layer has a picture
1 layer is blank
is there a way i can record the blank layer, and still see the the picture, but in the video, only the blank layer shows up.
When I try to crop a photomerge image all the layer boxes go blank, the box that should have the cropped image has a teeny paint brush overlaying a teeny canvas, no image.
View 1 Replies View RelatedIt happens more when i import eps files:
the 'layers only' toggle of the object manager will go blank; the toggle where the master layer and all objects are listed still works, just the layers only listing goes blank. All files opened after the event will do the same, requires a shutting down of CorelDraw and restart to bring things back to normal.
windows 7
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
View 5 Replies View RelatedI have a user who is experiencing a blank or improperly rendered layer dialog box from time to time (see image attached).
I've seen this with another user at a different office as well. I assume its a video driver issue but as I'm strictly a CAD manager and not IT support, messing around with that is outside my responsibilities.
A restart usually fixes the issue but I figured I try to at least find out of its a known issue with a known cause (and a known fix).
I have found that when I use the Layer Styles on one layer and then make a new layer or select a shape that creates a new layer that when I go to add Styles to the new layer/new shape the previous layer is affected by how I set the Bevel & Emboss, Direction, Altitude, Drop Shadow etc etc.
For instance, let's say I have a ...
BG > New Layer > draw an ellipse and then add a Bevel with an > Angle of 89 and an Altitude of 30 and then I add a New Layer > open the Styles and go to change the Angle to say +89 or whatever and the Altitude to say 45 ... the first Layer/Shape Effects change.
How I can keep one Layer from being affected by an other Layers Effects'?
I have found that if I Rasterize a Layer Effect that I can add a "double" effect on the same layer but I haven't tried the to do this with separate layers. However, for most of the work I am doing I cannot use the Raster because everything needs to be true vectors.
I have a Dell Laptop/Windows 7 Home Premium that's a 64 bit
how do you add to a layer from another layer, for instance, the background?
There are TONS of explanations for how to take away from a layer or create a new layer (layer mask) but nothing on how to add to a layer once it's already made. I made this layer with the magic wand tool and now I simply need to add little bits in to the layer that the magic wand missed.
How can I cut out a shape from my PS image to expose the background layer? I will "Save for Web" with a transparent background. The shape will be a rectangle, and a text layer will later be added to display within the rectangle.
My goal is to use the PS image as part of a Web page, allowing the Web page background to show through the rectangle which surrounds the text. Hope this explanation makes sense.
Level: Newbie'ish OS: Win7 64bit PS:CS6
I am just curious about the following...
Below is the layers panel with the BG layer OFF and the picture below it shows how my image looks when the BG is OFF.
Now here is the layers panel with the BG layer ON and here's my image when the BG layer is ON
I am a bit confused as to why the white BG is covering the 1st layer above it ... isn't the BG layer suppose to Always be Behind the 1st layer? Both BG layers are locked and in the same Z order ....
So, I'm just wondering why this is happening.
A friend had an image created, of a star, and cannot get hold of the person who created it. She's asked me but i have a problem, how to remove the background so you just have the star so that you can layer it on another background? I tried this a few weeks ago, changed it onto a transparent layer. Weird thing is when you put it onto another background, the transparent layer suddenly changes to a white background!
View 6 Replies View RelatedHere's my problem:
I get eps files that i have to post to a website. I open the files in Photoshop, and they open on 1 layer, a Background later, that has a white background. However when I drop them into a PPT or Word doc, they are indeed transparent.
When I open the EPS's in Illustrator, they are transparent. When I re-save the EPS in Illustrator as an Illustrator EPS, and then open that file in Photoshop, it opens on "Layer 1" and is transparent.
Why are these EPS's opening on a background later to begin with?
How do I unlock the background layer?
View 7 Replies View RelatedFor editing a jpeg file (e.g., sharpening), first I create a duplicate layer. Now, I have two layers: Layer 1 and Background layers. Editing is done only on the duplicate layer. That's how I am able to keep the original jpeg file. When editing is completed on Layer 1, I got to save the edited image. Before saving it, what should I do with the Background layer? Should I delete it or merge/flatten with Layer 1?
View 8 Replies View RelatedCS5 - the background layer - although it shows as being locked - it is not -- when I add a new layer the new information also changes in the background layer - how do you fix that?
View 4 Replies View Related