I used a quick mask to remove a background from an image and when I place the image into Indesign CS2 (Using Photoshop CS2) I can see a small white edge around the masked photo.
This is going to print at 2400 dpi four color and I don't want my customer looking at it and saying it's not up to par.
Is there any way to remove the effect I described?
id like to have her on a white background. im good all the way to the point where you use the 'move' tool to drag the masked image onto a white background ( which is a blank PS document saved in Jpeg). when i drag it over i end up with a huge close-up crop that fills the entire image of my white background so that you cant even see the white.
conversely, when i drag the white background over my mask i only get a small rectangular box of white that fails to cover the entire background area once i drag the background layer below the mask.
Sometimes when I mask an image - or actually - mask a group of several complex images, when I release the mask it is impossible to ungroup the images. Is there a way to make masked groups but then not have that happen?
View 4 Replies View RelatedWhen applying certain SVG filters to a group that contains an object with an opacity mask, that masked object disappears. AI_Dilate_3, for example.
View 1 Replies View RelatedI have an image that has a tiny bit of white around the edges of people's hair so it is very difficult to get rid of without erasing the hair. I've tried the erase, magic wand and laso tool but it doesn't get rid of all the white.
View 5 Replies View RelatedI'd like to have the border or edge of my picture gradually fade to white. What is he best way to do this. I tried to use a large airbrush with pressure at 50% and white paint. It's works but my hand is not too steady. Is there a more accurate way?
View 7 Replies View RelatedI made a picture transparent however, when I put the picture on the background I have white lines tracing the edge of the picture.
I don't see the lines in photoshop only after I after I place it on the background.
How do get rid of the white edges?
I'm pretty new to photoshop and am struggling to seperate an image into two layers without dodgy white edges i've done it using the lasoo tool and have tried using a pen with path but the same thing seemed to happen. has anyone got any tips on how to do this without getting the white borders ...
View 1 Replies View RelatedI'm in hopes there is a technique whereas I can paint within the black areas to remove the white spec without worrying about going over the edge, as I would with a black paint brush. I tried different brush blending modes (screen,overlay,multiply) didn't do the trick.
View 3 Replies View RelatedI have a document in publisher 07 with a photo of a product in it made from Photoshop CS3 saved as a PNG24. No matter how close I zoom in Publisher everything looks fine. When I create a pdf in acrobat using standard or high quality setting there shows white jagged edges aroung the photo. I have tried saving in a multitude of ways but cannot get those stupid jaggy edges to go away. Is it Photoshop, Acrobat, Publisher?
View 1 Replies View RelatedI'm having this odd problem that I can't seem to figure out. I have a web image (gif format) with a transparent background (deleted the background layer before saving as a gif), and when the image is against a darker webpage, the text of the image (that is basically all the image is, just blended text) has white pixels around the edges of the text. Did I do something wrong when I deleted the background, or how I saved the file???
View 3 Replies View RelatedThe gray box has a solid gray color on the edges but white towards the center. How do I make this effect?
View 9 Replies View RelatedWhat I need to do is find an easy way to remove the white spacing around an item and have the item displayed tight to the edges.
For example: I need a quick and easy way to turn this into this
With the intention of then being able to resize the image to the exact dimensions I require before then resizing the canvas size to create the exact amount of white spacing between the tops and bottom of the image.
how I would remove that distinct "cutout" feel from object edges that you cut
You have a (we'll say) face in the center of an image. Surrounding the face is just a black background. So you cut out the face, the result is the face with a black outline, and this is what I want to figure out how to fix.
What is the technique used to remove this? I dont actually have Photoshop but a descriptive solution with proper terms would help me alot. (For future reference)
I am attempting to make some combined images to make jewelry for my family but when I cut out an image from one picture and paste into a new layer above a different background, my cut image has white surrounding it, even after I have gone into 1600 zoom and removed all traces of white. I think the cut image is clean then I tell the program to print preview and wow, serious white outline, how to get rid of it? It sure makes my final print really juvenile and cheezy. Using Paint.net v3.5.8. to cut out images. Using ms Word to resize, layer and group images although I seem to have the same issue using paint.net too.
View 10 Replies View Relatedremove couple annoying white edges around the transparent PNG.
[URL]
Solution :Here is what I did in GIMP (how to do it in PS):
Open the image
Add another layer underneath the first.
- sample the green and paint the new layer with it
Select the original and do "Alpha to Selection"
"Merge Visible Layers"
Add Layer Mask -> Selection
Apply Layer Mask
Save as PNG
- Important: In GIMP there is a checkbox option to save transparent colors. Make sure it is checked!Reimport into the SketchUp material and it should work (did for me).I want to remove all white edges , i'm okay with black edges.
how can i get rid of these unwanted white spaces between two shapes in illustrator.İ spend my whole week to fix this, i tried everything but didn't work. İt's not something about antialiasing, when i import these shapes to photoshop or another programs, i'ts looking worse.
View 3 Replies View RelatedI have made a couple pretty nice text images, for friends, and myself. Many times this text image will have a border and consequently a transparency along a corner of the image because they are not always perfectly rectangle.
The problem is the images keep saving with a fine white line at the corner's of my image. How can I make this sharper so it doesn't have this white edge that stands out from the image?
this I scanned into MSPaint then opened in Gimp, I just need the bubble... but there is a lot of color mixed edges and even the white is color mixed... how do I fix the edges to be pure black and the bubble to be pure white?? plus I need to remove the 'recalcualating' text...
View 4 Replies View RelatedI'm quite new to 3DS Max and I'm using the 2013 version. Normally, all the edges on any unselected objects in my scene were grey, but all of a sudden, every edges in the scene became white, and they remained white even when nothing were selected.
I don't know if I have used a shortcut that I'm not aware of, but this is really anoying. I can't tell which object is selected .
I am new to illustrator and I am trying to remove the white edge around my shapes. But no matter what I do, I cannot. I am using CS3.
View 11 Replies View RelatedWhen I print out the InDesign file, there is always white edges on the paper, how can I remove them?
View 2 Replies View RelatedI have created a logo for a client using Xara. I would like to be able to send then a transparent version of the file so that they can use the logo on different backgrounds. The problem is a white hairy edge surrounding each element of the logo.
I have tried saving to png, gif, and tiff but they all look the same.
I've been using gimp for awhile now and have had great success using itto retouch about a zillion scans of old family photographs. but other than then few things I need in order to do that (paintbrush, clone tool, rotate tool and crop) I am still largely ignorant of how to use gimp. (There's just so much functionality in there, and I'm sure that I don't even have any use for about 90% of it.)
Anyway, a relative just sent me an old old family photo that some nitwit,perhaps a generation or two ago, did some seriously violence to with a pair of scissors. To salvage this one and to make it look presentable I really need to be able to take the scan I have of it and crop it into a oval shape.(Yes, it is a portrait.)
So anyway, how do I do this? It isn't obviously. I already did manage to figure out how to make a selection of the exact size and shape (and location)of oval that I want, and I _did_ make a selection like that... at least I_thought_ that I did... but then when I did crop-to-selection I ended up with the picture cropped to a rectangular shape, where the rectangle in question is, quite apparently, the rectangle which only and exactly contained the oval that I had selected earlier.
I'm sort-of guessing that what I really want is gonna end up being another one of these things that ends up involving multiple layers... yes? I mean of course, what I _really_ want to end up with is an image that _is_ in fact a rectangle, but everything outside of my selected oval has to end up being painted total white (255).
This is a strictly B&W image, BTW... just like all really old family photographs everywhere. How to fade the edges of the oval slowly to white.
I'm, trying to make an animated gif from a png image. I managed to do it, but there's a small problem... when I convert the png to gif (to make the animated gif afterwards) the image gets a strange white border around the edges. I tried to play with the Dithering and Tansparency threshold, but to no avail.
[URL]
How can I avoid this with Paint.NET?
I'm getting some white edges on my artwork, very fine ones. I googled a bit the problem, but couldn't find anything useful.
This is what I'm talking about:
Can you see them? They appear in the red figures. Looks somewhat pixelate with white color and sometimes black.
Here another example:
Because of the angle, I gues, the white edges on the red shape don't look as disturbing or pixelate as in the other picture. I even thought they weren't there, until I gave a closer look (click on the picture to see it better).
This will be something printable.
I'm using CS6 on OSX 10.9.1
I have a collage I put together of several guitars, and I want to outline the guitars in a gold outline and change the background color to black, to make them stand out. I can't figure out how to do this. If it matters, I have Photoshop CS2 for Windows.
View 1 Replies View RelatedIs there a way to extract the WHITE edges of this Editable Poly as Spline Shapes? Then I could use the Surface modifier to convert it to a Patch object.
I know there is a "Create Shape From Selection" button on in the Editable Poly dialog. But this gives me the ORANGE lines from the control cage, not the smooth lines on the subdivided object.
I recently invested in CS6 Production Premium and I've just tested legacy support by saving an Illustrator CS6 image in CS4 format.
The image contains a number of semi-transparent gradient meshes used for highlights.
Having loaded the saved CS4 .ai file in CS6, white lines appear along my semi-transparent gradient meshes (see the attached screenshot).
What's happening is that the anchor points with 0% opacity in CS6 suddenly have 100% opacity when I load the saved CS4 files in CS6.
Is this a known error? If so, how/where do I report it?
Here are the relevant CS6 and CS4 files: [URL] ....
There are no white lines when I save the image in CS5 format and load it in CS6.
i stuck while using autocad with following try.
i every other 3d modelling software it is possible to add new edges to a face, but i cannot find a proper function for autocad.
Following technic i try to use.
I create an cube of face and want to extrude one little rectangle. But one face is to big, for my reason and so, i want to inside a new rectangle of edges into one faces,which is in the proper size for my extrusion.
Due o this example how cani ad adges to an object??
How can I align edges so the object looks smooth?
View 4 Replies View Related