I made a picture transparent however, when I put the picture on the background I have white lines tracing the edge of the picture.
I don't see the lines in photoshop only after I after I place it on the background.
How do get rid of the white edges?
I followed the below directions untill I got to: Modify->. But under that menu, "transparent Color" doesn't exist.
This is Version 9 ot the program. Anyone have experience with this?
1.Open or create the image you wish to add transparency to. Now, use the Eye Dropper tool to select the color from your image which will be used for the transparency (do this by right clicking on the portion of your image where the particular color is located).
2. Now, press CRTL+A to select all and then choose Selections->Modify->Transparent Color and set it to Background color and Tolerance 0.
3. Now go to Color->Decrease Color Depth->256 Colors and use the settings below:
1)Optimized Median Cut
2)Nearest Color
and click OK.
4. Next, go to Colors->Set Palette Transparency... see below and click ok (if you want to test the transparency, click the proof button).
Photoshop 7.0.
I have a problem with getting transparant backgrounds to work. I know they can be saved with .gif and .png files, but sadly that does me no good. What I'm trying to do is make an image that I can use with Littek's Talisman V2 (basically a windows shell). Anyways, the only file types I have access to is .bmp .jpg and .jpeg. I know this can be done because they have examples with images with transparent backgrounds, but they are saved as .bmp. Anyway, when I try to look at them with photoshop and GIMP all I see is the image with a hot pink background. I've also notice that icons and .exe file images also have transparant backgrounds and when viewed show hot pink.
I have an image that has a tiny bit of white around the edges of people's hair so it is very difficult to get rid of without erasing the hair. I've tried the erase, magic wand and laso tool but it doesn't get rid of all the white.
View 5 Replies View RelatedI'd like to have the border or edge of my picture gradually fade to white. What is he best way to do this. I tried to use a large airbrush with pressure at 50% and white paint. It's works but my hand is not too steady. Is there a more accurate way?
View 7 Replies View RelatedI want to take a picture, and highlight the subject, in this case a flower, and make the background transparent. The suggestions I have found always tell me to do something that doesn't work. Like create a new layer and then drag it below the first layer, which it will not do.
The other has been to use the Magic Wand tool, highlight, and then hit the delete button. That doesn't work only puts another color in the BG.
The reason I am needing to do this, is that I cannot get the background in the picture to match the background on the page, in spite of putting in the exact same numbers!
I have a script that I am using but cannot figure out how to make the bottom reflection fade to transparancy. The image on the left is what comes out from the script & the image on the right shows how I want the reflection to fade into transparancy. Any and all help would be greatly appreciated.Thanks! P.S. I'm a Photoshop n00b so please try to be simple in the instructions. EDIT: I forgot to mention that the image needs to remain at it's original 60px × 224px, the fade to transparency cannot change the image size.
View 7 Replies View RelatedI used a quick mask to remove a background from an image and when I place the image into Indesign CS2 (Using Photoshop CS2) I can see a small white edge around the masked photo.
This is going to print at 2400 dpi four color and I don't want my customer looking at it and saying it's not up to par.
Is there any way to remove the effect I described?
I'm pretty new to photoshop and am struggling to seperate an image into two layers without dodgy white edges i've done it using the lasoo tool and have tried using a pen with path but the same thing seemed to happen. has anyone got any tips on how to do this without getting the white borders ...
View 1 Replies View Relatedfirst of all thank you for taking your time to look at my problem...i've spent a day and a half looking for an answer but nothing works! I have a picture that i try to feather so that the edges won't show when i post it on a webpage but everytime i do it when i upload it,
it's not transparant! it's white! is there something im doing wrong? i tried saving it as a GIF and PNG but that still don't work...it works while im on PS but when i save it, it goes back to white feathering! am i making sense?
I'm in hopes there is a technique whereas I can paint within the black areas to remove the white spec without worrying about going over the edge, as I would with a black paint brush. I tried different brush blending modes (screen,overlay,multiply) didn't do the trick.
View 3 Replies View RelatedI have a document in publisher 07 with a photo of a product in it made from Photoshop CS3 saved as a PNG24. No matter how close I zoom in Publisher everything looks fine. When I create a pdf in acrobat using standard or high quality setting there shows white jagged edges aroung the photo. I have tried saving in a multitude of ways but cannot get those stupid jaggy edges to go away. Is it Photoshop, Acrobat, Publisher?
View 1 Replies View RelatedI'm having this odd problem that I can't seem to figure out. I have a web image (gif format) with a transparent background (deleted the background layer before saving as a gif), and when the image is against a darker webpage, the text of the image (that is basically all the image is, just blended text) has white pixels around the edges of the text. Did I do something wrong when I deleted the background, or how I saved the file???
View 3 Replies View RelatedThe gray box has a solid gray color on the edges but white towards the center. How do I make this effect?
View 9 Replies View RelatedWhat I need to do is find an easy way to remove the white spacing around an item and have the item displayed tight to the edges.
Â
For example: I need a quick and easy way to turn this into this
Â
With the intention of then being able to resize the image to the exact dimensions I require before then resizing the canvas size to create the exact amount of white spacing between the tops and bottom of the image.
I am attempting to make some combined images to make jewelry for my family but when I cut out an image from one picture and paste into a new layer above a different background, my cut image has white surrounding it, even after I have gone into 1600 zoom and removed all traces of white. I think the cut image is clean then I tell the program to print preview and wow, serious white outline, how to get rid of it? It sure makes my final print really juvenile and cheezy. Using Paint.net v3.5.8. to cut out images. Using ms Word to resize, layer and group images although I seem to have the same issue using paint.net too.
View 10 Replies View Relatedremove couple annoying white edges around the transparent PNG.
[URL]
Solution :Here is what I did in GIMP (how to do it in PS):
Open the image
Add another layer underneath the first.
- sample the green and paint the new layer with it
Select the original and do "Alpha to Selection"
"Merge Visible Layers"
Add Layer Mask -> Selection
Apply Layer Mask
Save as PNG
- Important: In GIMP there is a checkbox option to save transparent colors. Make sure it is checked!Reimport into the SketchUp material and it should work (did for me).I want to remove all white edges , i'm okay with black edges.
how can i get rid of these unwanted white spaces between two shapes in illustrator.Ä° spend my whole week to fix this, i tried everything but didn't work. Ä°t's not something about antialiasing, when i import these shapes to photoshop or another programs, i'ts looking worse.
View 3 Replies View RelatedI have made a couple pretty nice text images, for friends, and myself. Many times this text image will have a border and consequently a transparency along a corner of the image because they are not always perfectly rectangle.
The problem is the images keep saving with a fine white line at the corner's of my image. How can I make this sharper so it doesn't have this white edge that stands out from the image?
this I scanned into MSPaint then opened in Gimp, I just need the bubble... but there is a lot of color mixed edges and even the white is color mixed... how do I fix the edges to be pure black and the bubble to be pure white?? plus I need to remove the 'recalcualating' text...
View 4 Replies View RelatedI'm quite new to 3DS Max and I'm using the 2013 version. Normally, all the edges on any unselected objects in my scene were grey, but all of a sudden, every edges in the scene became white, and they remained white even when nothing were selected.
I don't know if I have used a shortcut that I'm not aware of, but this is really anoying. I can't tell which object is selected .
I am new to illustrator and I am trying to remove the white edge around my shapes. But no matter what I do, I cannot. I am using CS3.
View 11 Replies View RelatedWhen I print out the InDesign file, there is always white edges on the paper, how can I remove them?
View 2 Replies View RelatedI have created a logo for a client using Xara. I would like to be able to send then a transparent version of the file so that they can use the logo on different backgrounds. The problem is a white hairy edge surrounding each element of the logo.
I have tried saving to png, gif, and tiff but they all look the same.
I've been using gimp for awhile now and have had great success using itto retouch about a zillion scans of old family photographs. but other than then few things I need in order to do that (paintbrush, clone tool, rotate tool and crop) I am still largely ignorant of how to use gimp. (There's just so much functionality in there, and I'm sure that I don't even have any use for about 90% of it.)
Anyway, a relative just sent me an old old family photo that some nitwit,perhaps a generation or two ago, did some seriously violence to with a pair of scissors. To salvage this one and to make it look presentable I really need to be able to take the scan I have of it and crop it into a oval shape.(Yes, it is a portrait.)
So anyway, how do I do this? It isn't obviously. I already did manage to figure out how to make a selection of the exact size and shape (and location)of oval that I want, and I _did_ make a selection like that... at least I_thought_ that I did... but then when I did crop-to-selection I ended up with the picture cropped to a rectangular shape, where the rectangle in question is, quite apparently, the rectangle which only and exactly contained the oval that I had selected earlier.
I'm sort-of guessing that what I really want is gonna end up being another one of these things that ends up involving multiple layers... yes? I mean of course, what I _really_ want to end up with is an image that _is_ in fact a rectangle, but everything outside of my selected oval has to end up being painted total white (255).
This is a strictly B&W image, BTW... just like all really old family photographs everywhere. How to fade the edges of the oval slowly to white.
I'm, trying to make an animated gif from a png image. I managed to do it, but there's a small problem... when I convert the png to gif (to make the animated gif afterwards) the image gets a strange white border around the edges. I tried to play with the Dithering and Tansparency threshold, but to no avail.
[URL]
Â
How can I avoid this with Paint.NET?
I'm getting some white edges on my artwork, very fine ones. I googled a bit the problem, but couldn't find anything useful.
Â
This is what I'm talking about:
Â
Can you see them? They appear in the red figures. Looks somewhat pixelate with white color and sometimes black.
Â
Here another example:
Â
Because of the angle, I gues, the white edges on the red shape don't look as disturbing or pixelate as in the other picture. I even thought they weren't there, until I gave a closer look (click on the picture to see it better).
Â
This will be something printable.
Â
I'm using CS6 on OSX 10.9.1
Is there a way to extract the WHITE edges of this Editable Poly as Spline Shapes? Then I could use the Surface modifier to convert it to a Patch object.
I know there is a "Create Shape From Selection" button on in the Editable Poly dialog. But this gives me the ORANGE lines from the control cage, not the smooth lines on the subdivided object.
I recently invested in CS6 Production Premium and I've just tested legacy support by saving an Illustrator CS6 image in CS4 format.
Â
The image contains a number of semi-transparent gradient meshes used for highlights.
Â
Having loaded the saved CS4 .ai file in CS6, white lines appear along my semi-transparent gradient meshes (see the attached screenshot).
Â
What's happening is that the anchor points with 0% opacity in CS6 suddenly have 100% opacity when I load the saved CS4 files in CS6.
Â
Is this a known error? If so, how/where do I report it?
Â
Here are the relevant CS6 and CS4 files: [URL] ....
Â
There are no white lines when I save the image in CS5 format and load it in CS6.
I tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
I thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
Â
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.