What was the last version of CS to include the creation of web pages as part of Automate in the File dropdown? I've tried to reinstall the original CS on a separate machine, which fails, since it does not make nice with my current version, and the Adobe folks are ABOLUTELY NO.
View 3 Replies
Is it possible to automate the creation of a DXF file when you save or check-in a part file from inventor. I have already set it up to create a DWF file to a shared folder on our network but we also export to DXF files as well for use in our machine shop. As of now the only way I know of doing it, is to open the .idw file and save it as a DXF manually. How to set this up to automatically create one on save or check-in.
View 9 Replies View RelatedAll I want to do is automatically generate a drawing for an assembly with sheets for the component parts. The assembly is being placed as an iLogic part if that makes a difference.
View 2 Replies View RelatedI have an iassembly which contains around 500 different members. There aren't any major differences between the members other than parts being Included/Excluded and parts being replaced by similar parts (this can all be done in the table as the parts are all created as one ipart family).
I need an assembly drawing for every member. As the drawings will be very similar, it is possible to just create one drawings then use 'Save as' and 'replace model reference' to create the whole lot. As this process would be very tedious and time consuming, I want to create a ilogic program or a VB macro to automate this process.
Basically i need a program that will...
FOR every line in the table (say 1 to 500)...
look at the currently active drawing...
replace model reference (for 2 views and a parts list) with the appropriate member (whos file name will match it's Part Number)...
save as with a file name that matches the current rows Part Number...
END when all of the members are complete.
I am trying to create a lisp file to automate the placing of angular dimensions at all of the vertex's along a very long polyline. There are 500-600 nodes at least and we need the angle between the incoming and outgoing lines at every node.
Is there a way to automate this with a lisp file, or am i relegated to clicking 1800 times and waste 3-4 hours doing this?
We get these files quite often and this will be a huge benefit to us.
I want to draw many circles with "3P" options. Every time I have to hit the space bar for repetition and select the option.
A couple of weeks a go I read a post here in CT which taught how to automate this part of commands. I don't know how to find it.
I want to exclude imates from two parts and 1 whole part at the same time.
This is my situation:
PartA with 2 sets of imates(for constrains on 3 axis for no movement) on the right side. Set A and set B.
PartB with 2 sets of imates, one on the left side set A and one on the right side, set C.
PartC with 2 sets of imates on the left side. Set B and set C.
i want, in a iPart, part A connected with part C connection with iMate set B. And in the same ipart i want Part A, B and C connected respectively with iMate sets A,C
So in the first situation i want iMates A and C and part B to be suppressed and in the second i want iMate set B to be suppressed.
How do I edit a derived part with a part file and include parameters I'm after?
I cant' seem to work out how to get to the reference components parameters to select whats visible and not visible.
I have created a video on After Effects. The original duration was 1:02 (as long as the video), but the client requested to add one more layer so I added at the end.
At this part the music stops and you just see the text layer.
I previewed it on After Effects and everything was looking perfect.
I opened the 'Adobe Media Encoder' in order to render the composition. The exported file though stops when the music stops! @1:02!
I have tried to figure out if there was a problem with the settings, but I wasn't able to find anything.
In an assembly i created a new part and the center point wasn't on the main center point.Also the axes were rotated.
How can i rotate back the new part's axes, and how to move the center point?
is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
I would like to save my inventor Part and Assembly model file in a lower version. Like in our company we use both Inventor 2012 and 2010. Once the file is created in 2012 and when shared to 2010 users they are unable to open, is there any possiblities to open 2012 files 2010 like how we do in Autocad.
View 2 Replies View RelatedI am trying to take a 3" sq 11 gauge tube that will have a pie shaped cut out of the tube leaving only one wall remaining. The tube then will be bent until the two sections are mated and welded. The tube is going to be processed on a tube laser to have the features cut out.
The problem is when I bend the tube in inventor I need a straight version of the tube for cad/cam programming and fabrication and not have it affect the bend feature that is placed in the weldment. I do no want to derive a part and save a separate version in the vault. I would like it all to be in one model.
I try to create a view representation and name it "straight" and suppress the bend feature in the new representation but it changes in both representations of the part.
Is there a way to have two different view representations of the part (suppressed bend feature, unsuppressed bend feature) that I can switch between?
I am trying to draw an isometric version of this part from first angle orthographic projections. But for the life of me I can't, I have never been good at nets / pr Attachment ortho to iso.jpgojections etc.
View 9 Replies View RelatedI have created a parametric, multibody master part file to derive parts from it, and then put them in an assembly. See attached file. Now, I need 3 different versions of this setup (with different values of the parameter 'bending_angle').
What is the best way to do it? If I derive parts from it, they always follow the *actual* status of their master file. Is there some method to do this: "derive from this file, with parameter bending_angle=55deg", but keep the dependency relation, i.e. if I modify something on the master file, the derived part fill follow the modifications (with the value of bending_angle=55deg)
Inventor 2013
I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
I use File>Edit in Image Ready
The file goes back to an older version or reverts to the way it was last time i edited it in photoshop, saying that - paraphrase("a slice which was present has been deleted.")
I've tried deleting all slices.
i have designed a website with buttons header images, product details etc, now i have the design ready.
it is in .psd format, so now what i want is to implement this design into a webpage, i want distribute different sections or portions of the design, now i dont find any such function in photoshop 7.0
what should i do ?
do i have to cut the different portions manually to create .gif files.
I have built a webpage in Photoshop7, i took it thru to imageReady, Sliced it, then previewed it in browser. thing is.. its Positioned to the left of my screen. the canvas i made it on in photoshop is 800x600, i used the guides to get the positioning correct and everything right.
View 6 Replies View RelatedI am trying to add links to an image and then add it to my web page...I have been trying to use the slice tool in photoshop which works great for the links but I can't seem to achieve a transparent background in the save for web...
Inside of photoshop the image is transparent and when I save for web (image) the map.png file is not created...map_01.png, map_02.png and all others are created but not the map.png file When I have saved for web (html) I have tried inserting the html into an iframe on the page and the image looks and functions correctly but there is no transparent background because it is an <iframe> and not the actual .png.
I used to assign certain width numbers for my psd webpages but it creates horizontal scroll bars on small monitors.
Can i do something with my psd file using photoshop in order to make the webpage fit all screen sizes? I don't like horizontal scrollbars appearing when my site loads. On the other hand, I also don't like un-necessary space appearing on large screens when my site loads. I use photoshop 7.
I use Dreamweaver and HTMl to make webpages. I was going to try to make a page using PS 2.
How big should I make the image? Should I set the image as a BG or a image in DW8? Resolution?
How does the browser resize the image from PS? It doesn't automatically fit to the page does it?
I want to make navigation buttons. If not too detailed, I would like to try some roll over buttons.
I want to know what is the appropriate size(width and height in pixel) of a webpage interface?
It would take a long time to load if the size is too big, but I wouldn't be able to add too much content on the page if the interface is too small.
how to add drop shadows on backgrounds (header, footer, sides) for my blog.
View 9 Replies View Related1.first create a image in PS? must flatter the image ?
2.slice it in imageready?
3.output the sliced image to where? dreamweaver?
4. how to add text or something else into the sliced image?
5. when you get start to create a image in PS, what size is it
usually used ? and dpi?
6.how to make a rollover effect on slice image in imageready?
7.what program do you use for webpage design? like this "teamphotoshop.com" site, PS, imageready,and what else?
create image in PS, sliced it in imageready, then edit html code in dreamweaver?
In Photoshop Elements I created a banner, 900 x 200 pixels, for a website. I used a few layers, one for text, one for graphics and background. In Elements everything is crystal clear, but when I import it to the website it seems to be a bit out of focus, a little blurry. In Elements I saved the file with ‘save for web’ with the quality at 100%, the resolution at 72 DPI. How do I make the finished image on the site as clear as in Elements?
View 2 Replies View RelatedHow can I create my own background for my webpage in Photoshop?
I mean what is the default size in pixol for webpage background?
I'm creating my first webpage design. Now I'd like to put it in a forum to get some feedback. But I'm worried that someone could steal the design right away from the presented gif file...
How could I protect my work? With watermarks? Do you even think, it's important to protect it?
I installed the retina display-optimized update to my purchased (non-Creative Cloud) version of Photoshop Design Standard (via the Adobe Updater app that pops up in my menu bar only when updates are available), but now when Photoshop launches, I get Photoshop Extended (and it's a trial version). Is this a known issue? Will I need to reinstall Photoshop?
View 2 Replies View RelatedHow can I install a recent version of Photoshop Elements and keep the albums set up in the older version?
View 1 Replies View RelatedI updated CS4 (student version) to CS5.5 commercial version. The brushes, patterns, shapes and styles I had installed in the CS4 Photoshop version were not loaded into the new version. I no longer have the original files of these assets (or customizations).
How can I load these in the updated version?
