Photoshop :: Unable To See New ICC Profile In CS5
Nov 29, 2012
I downloaded a new ICC profile, saved it to the desktop, right-clicked and then left-clicked on Install Profile. It does not appear in the Assign Color Profile window although I see numerous other profiles downloaded some time ago from the same company. I'm running Windows 7/64. I can see it in C:WindowsSystems32SpoolDriversColors along with the other additional profiles. I have updated, re-started CS5 and the computer to no avail.
View 4 Replies
ADVERTISEMENT
Nov 2, 2012
I jumped from 2010 to 2013 when switching jobs.I have to load my profile every time I start AutoCAD, it will not save as default. Also within my profile I created, some setting I have to reclick as they are not saving within the profile. I change the setting, hit apply, the save profile as currrent.I do also have an issure with the settings changing within different drawings. I will go to options and have to re check some boxes, and I havent closed AutoCAD yet.
View 9 Replies
View Related
May 1, 2012
I have installed AutoCAD (Map 3D 2012) onto a users machine. When I run the software, I get a message box appear saying it cant load the profile...
I went into the registry and noticed that his registry is missing a lot of keys for Map 3D (attached)
I have attached a copy of my registry for comparison.
What would typically cause this? I have tried to delete the registry entry and let it re-configure, but i get all sorts of errors (Internal Error 2738).
I should probably mention that I am using a profile switch in the shortcut.
View 4 Replies
View Related
Jun 5, 2012
I created a document profile and saved it in the appropriate folder:
C:UsersusernameAppDataRoamingAdobeAdobe Illustrator CS6 Settingsen_USx64New Document Profiles
I then needed to remove it, but it keeps coming back. I deleted the file (even from the recycle bin), deleted my preferences, and rebooted the machine. But when I start Illustrator, as soon as I press Ctrl + N or choose File/New, the profile automatically gets recreated in the New Document Profiles folder and shows up in the Profile drop-down list of the New File dialog.
View 6 Replies
View Related
Nov 17, 2013
I do not find the profile of my lens(Sony/zeiss vario sonnar T F 1,8) in lightroom 5.2 when correcting for lensdistortion. Another lensprofile also from Zeiss comes up (Zeiss Apo sonnar T 2/135 ZE).Is it a similar lens and should I then use it?
View 2 Replies
View Related
Jan 15, 2013
On starting autocad, before anything else appears an error box pops up saying "Unable to load Profile file, some profile information saved in the last session may not be restored". Click to accept the message and autocad starts normally with the exception that the ribbon doesn't show -at all. The user then switches to the classic workspace and back again and the ribbon will appear as expected.
The user, I believe, has local admin rights. I've tried uninstalling and reinstalling to no avail. My next step, is a last resort, which will involve uninstalling, then using some kinda registry cleaner to erase any trace of autocad on the laptop, then reinstalling - this is a bit severe, and will require the co-operation of my own IT dept, which can be like pulling teeth. I'm wondering if there's any other, less time consuming solution to this irritating problem?
ACad, MEP, 3DS Max
Windows 7x64
X5482 @3.2Ghz 8Gb Ram
Quadro FX1700
View 9 Replies
View Related
Mar 9, 2012
[URL]
It relates to machines which often have different users. I can get ACADM2011 to run for that user by editing the registry and importing keys from a good profile then modifying to user the new users credentials. This is Ok for a fudge fix but not suitable as a final solutions as I have to roll out 2011 to another 90 machines.
All users have full admin rights through a group policy so that is not part of the issue.
What I have noticed is that on machine which will work as expected the secondary installer runs in two steps. The first being the AutoCAD Mechanical 2011 install and then the language pack install. On machines which will fail and have the Profile issue only the language pack install runs. Where does ACAD look to check which causes this first install part to be skipped?
AutoCADM 2011 SP2
XP 32-Bit SP3
View 2 Replies
View Related
Sep 29, 2011
See attached image file. I can't select just the profile sketch to cut extrude. It only selects the whole face (surface). I have this issue on (2) different workstations and on various parts along the way.
View 2 Replies
View Related
Mar 19, 2013
Civil 3D 2013, trying to edit a FG profile through the Profile Entities vista and Profile Layout Parameters dialog box. All entities in the vista are shaded (locked) and will not allow me to edit. Is there something that I am missing here? I should be able to edit the PVIs (or entities) correct? I couldn't find anything in documentation as to why these are shaded and not allowing me to edit them.
View 5 Replies
View Related
Feb 6, 2014
I have Lightroom 3 and just this morning noticed that all of the preloaded lens profiles are missing. I've been using the program for 3 years now and they've always been there previously. The only one available is SIGMA. I have a Canon, so all of those are gone. At the bottom of the box in "Develop" it says "Unable to locate a matching profile automatically."
I am running on Windows and tried repairing, but it seems to be missing the installation file that it needs.Is there a way to download and install the profiles for just the lenses I have? Or, do I need to completely re-install? If that's the case, will all of my libraries stay in tact?
View 1 Replies
View Related
May 4, 2011
I HAVE THE SAME PROBLEM, BUT THE FIX IS NOT WORKING IN AUTOCAD 2012
View 2 Replies
View Related
Sep 30, 2013
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
View 2 Replies
View Related
Jan 28, 2013
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies
View Related
Jan 16, 2013
this file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB
View 9 Replies
View Related
Dec 21, 2012
For a monthly magazine on uncoated paper, our workflow is as follows:
- convert every photo to uncoated cmyk (PSO Uncoated) + apply some corrections to look nice in this profile
- apply a fixed correction curve to the photo's
- (resize images + apply proper sharpening for print)
- export pdf: convert colors to destination, preserve numbers
The correction curve step is critical. Without it, everything is printed much too dark.Unfortunately our printer can't provide us with a correct profile for the paper that is used. That's why the correction curve in photoshop is needed.The profile + the correction curve give a good, predictable result.
However i don't like the workflow with the correction curve, because only photoshop links can be corrected.We would also like to put a digital version of the magazine online, so i have to replace all links if i won't to have them displayed correctly.
Can i somehow combine the icc profile with the correction curve into a new icc profile?I did some research and found about "Custom CMYK" in photoshop (see screenshot), but i think an existing profile (PSO Uncoated) can't be edited or replicated in this dialog box.
View 5 Replies
View Related
Aug 28, 2008
Assign Profile and Convert to Profile does not shows in Edit menu for PS CS3. How do I get those options displayed on the Edit Tab?
View 3 Replies
View Related
Mar 1, 2013
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
View 5 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Oct 9, 2011
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies
View Related
Mar 5, 2012
I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies
View Related
Jun 17, 2013
I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies
View Related
Jan 17, 2012
I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
View 9 Replies
View Related
Feb 28, 2011
I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
View 6 Replies
View Related
Mar 27, 2014
In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.
View 3 Replies
View Related
Jun 28, 2012
The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
View 1 Replies
View Related
Nov 22, 2013
I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
View 7 Replies
View Related
Jul 24, 2012
I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
View 3 Replies
View Related
Jul 17, 2012
differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
View 6 Replies
View Related
Feb 7, 2012
I want to transfer or copy the tool palettes (walls, doors, FFE) from one profile to another. I have all my tool bars, set in one profile correctly, but all the tool palettes are in another profile.
Is there a way to copy these tools into another profile? Even if I over-right another palette?
View 6 Replies
View Related
Apr 11, 2012
The attached profile is a section from a solid. I would like to create a closed profile in order to extrude the shape into a solid. The polyline command and splinedit don't seem to do the trick.
View 9 Replies
View Related
