Photoshop :: Combine ICC Profile With Correction Curve Into New ICC Profile
Dec 21, 2012
For a monthly magazine on uncoated paper, our workflow is as follows:
- convert every photo to uncoated cmyk (PSO Uncoated) + apply some corrections to look nice in this profile
- apply a fixed correction curve to the photo's
- (resize images + apply proper sharpening for print)
- export pdf: convert colors to destination, preserve numbers
The correction curve step is critical. Without it, everything is printed much too dark.Unfortunately our printer can't provide us with a correct profile for the paper that is used. That's why the correction curve in photoshop is needed.The profile + the correction curve give a good, predictable result.
However i don't like the workflow with the correction curve, because only photoshop links can be corrected.We would also like to put a digital version of the magazine online, so i have to replace all links if i won't to have them displayed correctly.
Can i somehow combine the icc profile with the correction curve into a new icc profile?I did some research and found about "Custom CMYK" in photoshop (see screenshot), but i think an existing profile (PSO Uncoated) can't be edited or replicated in this dialog box.
View 5 Replies
ADVERTISEMENT
May 10, 2012
I am using Photoshop CS6 on a PC running Win7. In the previous version I was able to save a profile in the Lens Correction panel. In this version I can find my camera and my lens but it won't let me save the profile. I only real estate and straight verticals are very important.
View 3 Replies
View Related
Feb 16, 2012
I'm just beginning to work with Photoshop CS5. When I was editing with the camera raw features; I discovered that there had not been a "Lens Profile Correction" loaded for my Panasonic Lumix DMC-L10 with a Leica lens 14-150. I"m looking for a method to get this lens added to the Profile Connection.
View 1 Replies
View Related
Aug 19, 2012
I'm unable to find a profile for my Canon 5D Mark III within the PS CS6 lens correction filter. In fact, Canon isn't even available as a camera make option within the Search Criteria box, nor are any canon lenses. When I click the Search Online button, the prompt reads "No online profiles found".
I have no problem within Light room 4 (the Mark III and lenses are recognized)-- however, I'd really like to be able to use the new Adaptive Wide Angle Lens filter within CS6, which needs the camera's EXIF data to function correctly. I'm using a new i Mac OS X.7
View 3 Replies
View Related
Mar 2, 2014
where to get the plug-in to use the auto lens profile correction in Lightroom for the above stated lens? Adobe only have the older 18-250, and even on the new 5.3 LR version, still have not supplied the plug-in for this lens!
View 1 Replies
View Related
Mar 16, 2014
I would like to know how to add a lens to the lens correction profile in LR5. I would like to add my Canon 135f/2.
View 4 Replies
View Related
Aug 14, 2013
In fact, the problem is that when I activate this option my lens are not selected automaticly. I need to choose them from the list. Before with LR4 both of my lenses we're correctly detected. Downloaded and installer LR 5.2 RC and still the same results
View 2 Replies
View Related
Jan 9, 2012
Unless it is hidden away in an area i've yet to discover, where the lens profile/correction module is hiding? Simple enough to enable in 3.5...alas, can't find it in 3.6.
View 3 Replies
View Related
Jan 2, 2014
What camera profile should or could I use for a Nikon Coolpix P510? There is no profile for that specific camera --- the only choice is a Coolpix P6000. My Nikon DSLR lens profiles are all there --- not the Coolpix.
The P510 has a 4.8-180mm f/3/3 - 5.9 lens; the P6000 profile uses a 6-24mm f/2.7-5.9 lens.
View 1 Replies
View Related
May 31, 2012
I refer to Lightroom version 3.6. I have purchased a panasonic-gx1 plus 14-42mm & 45-175mm lenses and would like to add the lens profiles to the lens correction module.
View 1 Replies
View Related
May 25, 2013
I have lightroom 4 and Canon Powershot S110 do I need a lens profile correction and if yes so from where would I get it?
View 2 Replies
View Related
Jul 24, 2012
I'm using 2004 and drawing a profile for a utility. I need a 25' radius for my vertical curve for this utility line. I'm wondering how people draw this radius if there is a vertical exaggeration in the profile. Horizontal scale is 1"=20' and Vertical scale is 1"=5'.
View 9 Replies
View Related
Sep 30, 2013
I've been trying to reproduce this color blind conditionfor a long time now and I still didn't figure out how I can do this. I've searched for cluts but didn't find any, only this, which has some previews of them, but no any files I can load into Photoshop's Color Lookup adjustment. I've looked into Pixel Bender plugin, but I'm using CC so that doesn't work either... I've also tried it with the Index Color mode, but that really messes up my image as it has a really low color range (256). I've even tried reproducing the same effect with adjustments, channels, etc, but didn't figure it out.
Since there's a way to perfectly color proof images with this condition, I'm guessing this has to be some kind of ICC profile or something similar. Is there a way I can use it as a color profile?
View 2 Replies
View Related
Nov 12, 2012
Seems like a bug on Autocad Civil 3D 2013. I followed all the tutorials to design a circular vertical curve on a profile and it just dont work. I put circular on settings, click on circular curve by PVI button, the software even ask the radius and it end up designing a parabolic curve.
View 2 Replies
View Related
Jan 11, 2013
I just created a profile by choosing my PVIs and linking them together with tangent curves. How do I add labels to show the vertical curve properties (K value, curve length, station of PVI, elevation of PVI...)? I'm guessing I have to edit the label style?
View 2 Replies
View Related
Apr 11, 2013
I have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is ??? for the value. I am currently running Civil 3D 2012.
IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}
View 1 Replies
View Related
Dec 22, 2013
I'm using Civil 3d 2010, in profile curve details are coming worng, PVI station is OK but LOW PT station of curve is wrong, also in Civil 3d 2009 no any curve details are coming. I'm sending the secreen shot of profile.
View 1 Replies
View Related
Dec 17, 2013
I am working on a corridor. I have a proposal profile, and now i wanted to add a vertial curve between the new profile and exsiting. (see attached.) but i have not done before.
View 4 Replies
View Related
Jan 28, 2013
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies
View Related
Jan 29, 2014
It's possible in maya to sweep a profile along a closed curve? Like in 3DsMax, for example to make a window frame with a particular section profile?
View 1 Replies
View Related
Apr 11, 2013
I have tried all of the expressions below to add the the vertical curve elevation at the pvi to my curve crest & sag labels on my profile and all I get is? for the value. I am currently running Civil 3D 2012.
IF({Grade In}<{Grade Out}, ({PVI Elevation}+{Tangent Offset at PVI}), ({PVI Elevation}-{Tangent Offset at PVI}))
{PVI Elevation}+{Tangent Offset at PVI}
{PVI Elevation}-{Tangent Offset at PVI}
View 8 Replies
View Related
Dec 4, 2012
How can we delete an element within a connected profile.
View 2 Replies
View Related
May 7, 2013
On our road profiles, we have to show that low points and high points are adjusted to maintain a minimum of 0.6%. see attached screen shot. Currently, I am calculating the adjusted low point and editing the profile label. Since I can't figure out how to edit one label in a data band, I've been wiping out the old elevation and typing in the new elevation over it.
Is there a way to get C3D to do the calculation for me and populate the labels with the adjusted elevation?
Civil3D 2013
Windows 7
View 1 Replies
View Related
Jan 16, 2013
this file is tagged "c2" -- it doesn't trigger a profile mismatch warning -- why my working RGB is sRGB
View 9 Replies
View Related
Aug 19, 2013
I'm creating finished roadway profiles by setting the PVIs then going back and inserting vertical curves (Free Vertical Parabola, PVI Based). When I insert the vertical curve, it displays as 1-5 tangents depending on length (not a smooth parabola). I've changed the curve tessellation distance under the Edit Profile Style - Design tab, but it doesn't smooth it out. What am I missing here. I don't have this problem in other drawings and I'm using the same template/drawing settings.
View 2 Replies
View Related
Jul 3, 2013
I have a large scale industrial project with multiple road profiles and sections sheets. I find that when I plot my drawings manually by opening the drawing everything comes out fine. But when I publish the drawings manually or thru Sheet Set Manager, it shifts my vertical curve labels on my profiles down, which then conflicts with the profile linework (see attached image). Unfortunately manually plotting these drawings is not an option. Because of the amount of information in each drawing it takes 3-4 mins to open and we have 200+ drawings in a single set of drawings, which we have multiple sets of drawings for the project.
View 2 Replies
View Related
Aug 28, 2008
Assign Profile and Convert to Profile does not shows in Edit menu for PS CS3. How do I get those options displayed on the Edit Tab?
View 3 Replies
View Related
Mar 1, 2013
I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
View 5 Replies
View Related
Nov 4, 2013
I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies
View Related
Mar 14, 2013
Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
View 3 Replies
View Related
Oct 9, 2011
I want to create a profile/wall style or what ever you want to call it for a raised deck flooring for external decking. I am looking at the decking material only. Not concerned about the timber framing sub floor material.
View 1 Replies
View Related
