Photoshop :: Unable To Name Layers In CS4
Mar 23, 2012
When I highlight a layer and start typing a new name in, it switches over to keyboard shortcuts. The only way I can name a layer is to go into Layer Properties, which takes up a lot of time. I've removed prefs and restarted, run Diskwarrior, repaired permissions, everything I can think of.
I am also having the same trouble with InDesign, so perhaps this problem is Adobe-wide, but these are the two I use the most. I suspect this was caused by the installation of MacKeeper, which was deleted some time ago - still have problem.
View 5 Replies
ADVERTISEMENT
Apr 9, 2012
I'm using Photoshop CS5 for Mac, and when I try to save files as TGA or GIF, the Layers option is not available and the result is a flattened, single layer.
• Files I am working with are 8bit RGB.
• Photoshop is set to 32bit, not 64bit.
• There are no extra channels other than RGB.
• Switching files to indexed color doesn't work because it asks to merge all layers.
• I can open Gif files containing layers, but I can't then Save or Save As with layers.
Below is the save dialog box as it appears when i try to save a Gif or TGA.
View 3 Replies
View Related
Aug 4, 2004
I'm having an issue with editing layers copied from one file to another in Photoshop CS. It seems to be essentially locking the layers and I can't figure out how to unlock them. I've tried duplicating them, renaming them, and resetting my tool preferences (I'm desparate and frustrated). They are in the same mode. This also tends to be an issue with opening a .jpg or .gif file and trying to edit it.
it seems the issue was my computer had the user permissions set for read/write only. Once I changed it so that all users had all permissions I was able to edit it.
View 1 Replies
View Related
Feb 8, 2013
I have been unable to open multiple images and retain them on separate layers
View 10 Replies
View Related
May 15, 2008
I have been making drawings mostly from objects I copy/pasted from objects in previous drawings in my company's database. I had to draw some additions and it is these objects which will not print (everything copy/pasted plots fine).
When I look at the layers window, nothing is out of the ordinary (all layers thawed, unlocked etc).
This is AutoCAD MAP 3D 2009 by the way!
View 6 Replies
View Related
Jun 11, 2011
Whenever I work with layers to try and achieve an effect I want, I have 2 or more layers. Then when I try to merge them to get the desired effect, "nothing happens!".
The other layers in the layers menu disappear and my picture remains unaltered, it's like whenever I draw in GIMP, all that editing is seen on my image, but when I try to merge my layers to get say, a glow effect, nothing happens to my image. It's like I didn't do anything. So frustrating!
Basically, what I do is this:
1. I create a new image.
2. I beginning stages of my image on whatever I want to do.
3. I create a new layer (or more than one, doesn't matter) to tinker around to try and achieve a certain effect (doesn't matter what effect I'm trying to achieve, always has the same results).
4. Then when I'm done tinkering around, I go to "Image--Merge Visible Layers"
5. Nothing happens. The multiple layers I had in the layers box vanish, but the effect I was trying to achieve is not merged with my image!
Layers are useless to me because I can't use them, yet I need them to achieve the things I need to have in my art. I am not looking for how to merge two images together in one, I want LAYERS not images.
View 9 Replies
View Related
Jun 9, 2013
why are we not able to edit layers outside the canvas?
I often create images were the canvas size is fixed (e.g. display resolution). I then add layers to it that are often larger than the canvas. I would now want to select the superfluous parts of the just added images (e.g. to make them transparent), but I can't select parts of the layers that are not on canvas!
I also can not see any layer content that is off-canvas. A workflow I'd prefer would be copy everything somewhere (not necessarily inside the canvas) and then align it layer by layer, which is hard when one can not see the content of the off-canvas layers.
View 6 Replies
View Related
Mar 25, 2012
Im having some problems with a file im working on. I have a file with an x-ref, when im in the model space i can see all layers i want to see, but in the viewports i created in the file i noticed that 2 layers(layers that i really need to see) dont show up. Ive checked the freeze/thaw, on/off, plot/no plot settings, layerstate, i tried creating a new layer in the x-ref file(the parent file) and putting these things that dont show in the new layer but nothing changes. I'll attach two images for the layer settings.
So, whats missing in the viewports is the cyan text where it says "Klassisk sal"and some other text surrounding it and the cyan box with the text "Mko 12.002". The highlighted layers in the layer properties window are the associated with these items
Viewport.jpg
here is the layout, the layout is active and again the two highlighted layers are the ones associated with the objects missing.
View 5 Replies
View Related
Nov 3, 2013
I have used Gimp for years and today I simply cannot move layers. In the layers dialog I usually drag the layers into the desired order but for no reason the layers simply float back to their original position. I have tried;
- Clean install of gimp
- Opening various gimp files (xcf)
- Creating new xcf files
The layers are not;
- Locked
- Floating
I have attached a video of the problem, which can also be viewed at;
[URL].......
View 3 Replies
View Related
Nov 25, 2013
I just bought Lightroom 5. I have been unable to export files as layers into Photoshop CS4, no matter what.
View 7 Replies
View Related
Jan 21, 2014
I'm unable to create layers with GIMP. The program acts like the layers commands are disabled. Don't know whether it's relevant, but GIMP works normally on my XP machine. I'm unable to make layers from the program on my Vista machine, and I do not see settings or preferences for layers.
View 1 Replies
View Related
Feb 19, 2013
I'm adding a layer(small picture of unicorn, for the sake of the example) to the default/first layer and I move it around the background for positioning.
Once I decide to add another layer/picture I cannot move the unicorn anymore, he is imprinted in the default layer. Is there a possibility that I can move it again after the manipulation with the second picture/layer?
In effect, I want to have the possibility to move many small pictures "at once"(its not really at once but very close to it, like I want to move stack of cards on my table), is that possible?
View 3 Replies
View Related
Feb 11, 2011
I am referencing a survey file in my site plan. Both were created using Civil 3D. I want to change the color of all of the reference files' layers to 250, so I selected them all in the layer properties manager and did so.
However, some layers are not changing colors. One layer is red in the reference file, but comes through on the site plan as magenta. Some Civil3D structures are also refusing to change colors.
I selected all of the objects in the reference file and made sure their colors were "by layer," but it did not completely fix the problem.
View 7 Replies
View Related
Jan 13, 2014
How can I update the data connection source for all the display map layers in my map layouts? If I want to change the shapefile a layer is representing I can not get the layer to point to the new shapefile.
The layer seems to always remember the name/location of the old shapefile. If I export the layer and modify the value in Notepad then load a new layer from the saved and modified layer file it will change. However I would have to do this for every layer I want to change.
Is there another way to change the property of this layer in AutoCAD?
Example: I create a drawing and layout with a Display layer that points to the FDO data for shapefiles "C:datauildings.shp".
I then give the drawing to another worker hows data is on "E:DATABUILDINGS.SHP" the data connection to the layer cannot be updated that I can see.
View 5 Replies
View Related
May 3, 2012
I have a drawing with a bunch of layers that cannot be deleted since they are nested in block definitions. However, the blocks are not in use and cannot be purged. I think it is because they are referenced for point styles, that are also not in use. Is there a way to delete the point style in order to clear these layers and blocks?
View 1 Replies
View Related
Sep 25, 2012
In Photoshop CS6, when you have a shape layer with a layer mask, and the two are not linked together, and the layer mask is selected, you should be able to scale the layer mask independently of the shape. What actually happens is the shape gets scaled and the layer mask stays untouched. In fact, even if you option-click on the layer mask to show the mask by itself, and then try to scale it, you still end up scaling the shape instead of the mask. Even if you go as far as to make a pixel selection of the layer mask and attempt to scale the pixels, the shape still gets scaled and the layer mask still stays put! Unbelievable!
This works correctly in CS4, but not in CS6 (don't know about CS5).
View 8 Replies
View Related
Jun 8, 2011
I just started using 2012. Two problems:
1- Somehow, in my current drawing, everything is layer-locked. There are no Xrefs in this very basic drawing. All layers are unlocked. Yet, any attempt to select any entities results in "x objects were on a locked layer". Again, all layers are unlocked. No Xrefs. No blocks. Just simple lines. All entities appear faded. This happened after viewing a layout in both paper and model spaces. Reviewing the text window shows no strange accidental commands.
2- There is a default set of viewport scales in the status bar at the bottom right. Default scales are all metric. I would like both metric and imperial. I see you can edit which exact scales are in a metric list, and which are in an imperial list. But how do you set what is displayed/available in the status bar button?
View 9 Replies
View Related
Sep 12, 2007
Using CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
View 3 Replies
View Related
Apr 21, 2012
I recently upgraded to PhotoshopCS5.5 and find that I can't print on my HP Photoshop Premium printer. I'm using a MacBook Pro with Mac OSX 10.6.8. I also am unable to open 2 images at the same time.
View 3 Replies
View Related
Aug 6, 2013
I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.
View 2 Replies
View Related
Sep 30, 2013
I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?
View 3 Replies
View Related
Mar 20, 2013
All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?
View 3 Replies
View Related
Sep 6, 2013
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
View 4 Replies
View Related
Aug 3, 2013
I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.
View 6 Replies
View Related
Nov 11, 2012
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
View 2 Replies
View Related
May 9, 2013
I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies
View Related
Jun 19, 2009
merged layer results to a slight different color compare to its original unmerged layers. the result is that the merged layer has more bluish, What's wrong and what's the solution?. Im using CS3.
View 9 Replies
View Related
May 31, 2012
I have now exactly the same problem as below with over 1000 images, I have saved them in .psd that has over 100 layers each. On top of those there is curves and levels layer that affects every layer below. I want to save all images to .jpg for videoedit with those curves at least. I don't want to merge same curves 100 times. Is there a solution in phothoshop cs5 or cs6 available? Would save alot of working hours. All I have got by this far is blank white images of adjustment layers and non adjusted jpg-files.
This discussion was opened in 2010 and I quess this is same problem:
"
How to merge adjustment layers to hundreds of layers?
Jul 28, 2010 10:38 AMSay I have a photoshop File with 100 layers.
And say I created 3 adjustment layers on top of those 100 layers to get the adjustments that i want for those layers. I'm happy with the adjustments but Then I NEED to merge those 3 adjustment layers to ALL those 100 layers.
Is there a way to easily permanently apply the adjustments to each of those layers without having to do it manually? I absolutely need to merge the adjustments to the seperate layers because of how the layers are being used in a seperate 3d program.
So far what I've been doing is duplicating the adjustment layers for each layer and merging them to said layers separately.. I wish I could just right click the adjustment layer and Tell it to merge to everylayer it affects or apply to every layer underneath it!
View 3 Replies
View Related
Oct 16, 2013
I am loosing all my layers effects when I merge all the layers together to save the image in the tif format!
View 2 Replies
View Related
Mar 14, 2007
how to unlink my "background" in the layers pallete from the other layers.
I am using photoshop CS2. on a mac OS X.
When i make changes to other layers in the layers pallete, it changes my 'background' as well. I know that i can duplicate it but regardless, the 'background' changes according to what i do to the other layers even tho it is locked.
View 2 Replies
View Related
Nov 20, 2012
I want to create a PDF from Photoshop while keeping on a master layer/group for all pages AND turning on/off individual layers/smart object in another group? I know there may be a way to do this with Layer Comps but I would rather just use layers.
View 3 Replies
View Related
