Photoshop :: Translation From English To Arabic For Mockup Purposes
Jun 19, 2013
I have a mockup designed in English which needs to be translated in several other language for our sales team to use in the presentations.Translating to French, German and Chinese worked out fine, bur for some reason this is not working for Arabic text.I have a translated Word document from which I'm pasting the translation into my original English version, for which I would the realign as needed for the layout.
The problem is that, for one, I can't seem to find a matching default font in Photoshop which translates well (for example, for Chinese used "Microsoft Yahei", and "Helvetica" for German).I have over a dozen Arabic font options to choose from, but something still seems wrong when comparing.
I'm not trying to turn my whole work space in Arabic, put need to copy/paste text from Word into Photoshop the realign to the right (basically flip it)What am I missing here? Are there some specific settings I need to modify to have this work?
View 1 Replies
ADVERTISEMENT
Nov 5, 2004
for some reason my Photoshop CS is not allowing me to select 'english' in the resolution field when I create a new document in Photoshop. Any ideas why? Another installation here at my office shows English as an option - on my machine and another machine it's not there at all. This of course is concerning because if we select other language options the numbers get concerning and we are not confident that using 'Arabic' will provide us the correct resolution settings.
View 2 Replies
View Related
Mar 11, 2013
I've downloaded some of adobe cs6 programs such as photoshop, dreamweaver, illustrator, and flash, But when I was going to begain a new download I found that there is an ( English - Arabic enabled ) option that I unfortunately hadn't enabled in the previous downloads -
Is that the reason I can't write arabic properely in photoshop ? - and instead choosing it I chose ( English ) and unfortunately I need arabic beside english to be enabled and written properley as I am egyptian. So , Is there any solution, option, or language patch that changes it to arabic enabled instead of english and re downloading again ? and what is the difference between the two versions, is it language only ?
View 8 Replies
View Related
Aug 30, 2012
I have Adobe Photoshop CS6 (part of Master Collection English-Arabic Enabled) installed on MacBook Pro with Mac OS X Mountain LionI went to Preferences -> Type -> chose Middle East , to enable arabic typing but whenever I choose the Text tool, photoshop freezes, and cpu use reaches 130% ( on Activity Monitor it showed that photoshop using 60% of cpu while "fontd" is up to 70%)I don't know why font daemon is consuming that much of cpu, probably facing problems with building fonts models, I left it for half an hour, but no use.
the corresponding windows version, did not freeze, instead just went alittle quirky heavy for half a minute then back to normal and i was able to use text tool and type in arabic normally
View 5 Replies
View Related
Jul 17, 2013
PS pat files are patterns? how used, applied & imported to PS? How appear Grid lines(eg 960 grid system; how configure?) when designing a mockup with PS cc or cs6?
PS cs6 -to-> PS cc needed uninstall/reinstall... or can use upon update (no uninstall)?
View 11 Replies
View Related
Mar 18, 2013
I am a logo designer, and I have this photo realistic mockup for logos. So i have a layout where the main logo is a little above center, and below are two mock ups. So I am trying to have it where I can just make a change in the illustrator file and Photoshop can instantly make the change. The problem is that I am using two different mock ups and I have to edit both the mock ups (double click opening another window and pasting the smart object) to use them. The top layer is ok, because it will update itself.
I want a way to edit the illustrator logo and Photoshop to make all the changes in all three displays itself. The problem is that the bottom displays open up other Photoshop windows, with smart objects within them, but if I open up the top smart object, then it automatically opens illustrator.
So is there a way to just make one change in illustrator and Photoshop to automatically update it all.
View 1 Replies
View Related
Mar 30, 2013
I see many people doing realistic mockups for print materials, and have seen some Photoshop templates for doing this. Here is an example of mock up
[URL]......
View 14 Replies
View Related
Jul 1, 2005
Im having trouble finding cs2's Preference files for backing up purposes.
View 9 Replies
View Related
Aug 11, 2013
I am preparing a Photoshop tutorial for my Finnish students, I use my Adobe programs in English and some of my students probably do as well. But I would like to have the list of Menu vocabulary as reference for those who use Finnish language.In other words, I want to provide them with a mini dictionary ENG-FIN of the Menu. For example Open-Avaa, Save-Tallentaa, etc.
Problem is that translating doesn't always work, so I need to be sure I use the same terminology used by the program in the Finnish version. Is that available somewhere?
View 1 Replies
View Related
Jul 3, 2012
I left site, we are as building structures. When I id the current info, I have x and y co-ordinates but z values are 0, and when I try edit the z value it wont allow me to apply the new level .
View 8 Replies
View Related
Jan 18, 2013
I designed in photoshop with pen tool a shape of pattern which would be printed. Exported to Tiff. But what I need to add is a pattern to add 3d feeling. Actually it will be printed to fabric and I need to add 3d feelings like example here:
I need to recognize two parts- a leaves and rest of the "plant" how to do it?
View 1 Replies
View Related
Sep 3, 2013
I notice that Nulls have a collapse transform switch. Just trying to imagine when this would be useful. Something related to the nifty "Scale Z" precomp trick, maybe?
View 2 Replies
View Related
Jul 11, 2013
I am working with a photographer who uses lightroom. I am not familiar with lightroom but I use CS6 InDesign and Photoshop for these types of projects (brochures, postcards, fliers) The problem is I'm used to photographers sending me highres jpegs at 300dpi around 2.5 - 4MB that retain great quality, but this particular photographer is sending me files out of Lightroom that are average of 6-11mb. Taking about 6 hours to download. He is exporting the files as jpegs at 300dpi, 8x12. He swears that the photo will lose quality if he makes it smaller o nfile size. make the file sizes smaller in mb while still retaining quality? He also uses photoshop extended.
View 1 Replies
View Related
Sep 24, 2013
I currently work for a construction company, we mostly focus on roadway rehabilitaion. We recieve DOT paper plans containing the construction plans and cross sections. I have been till now using the cross sections to build the roadway in Agtek, which is the software we use, then from there I can do my takeoff for excavation, utlites and areas. We have the 2012 BIM software and i'm very intersted in using that to rebuild the plans so I can preform the takeoff just as the DOT does as well as to model the utilities. Also i'm intersted in creating the model to show the estimators and the higher ups, so we can create a phasing plans, traffic plans or how we would want to handle the roadway rehab in general. I'm a novice in terms of Civil 3D, so this would be something i'd be practicing at home first.
View 9 Replies
View Related
Nov 13, 2013
I am using Autocad 2011 although I only use it to tidy my drawings prior to sending to my client, my proficiency is quite basic. I have been tasked with surveying a number of feeder pillars or cabinets with 5 points of data, pt 1 is the centre of the doors, the other 4 points are the corners of the cabinet always in the same order. These can be imported into Autocad as a series of points and then I have to join the dots, and draw the cabinet. I know a little about blocks and that I can create a block of my drawing and place it over the five points, and then I'm stuck as if I change the block once it changes it in all the other positions.
After i have placed the block, I need to list the coordinates of the 5 points, this i do individually using the id command and copy and paste into a table. Is there anyway to speed this up?
I have attached a sketch of what I'm after doing, there could be as many 20+ cabinets in a drawing.
View 3 Replies
View Related
Sep 28, 2012
i have a long alignment going through a lot of creeks. right now the creeks are in xref just polylines but it intersect with alignments at areas.
is there a quick way to show all these lines on profile for design and drafting purposes? ideally want to just show a line at each intersection would be fine.
tried using pipes takes too long to set up. this is one important feature to have in the software.
i can program it again but i have not enough time to finish this project by mid october if i keep programming things.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 6 Replies
View Related
May 13, 2012
In Gimp 2.6 the User Interface was nearly perfect translated to Dutch. Now I upgraded Gimp (via ppa) to 2.8 and the translation is nearly complete gone.
My questions:
- is there a possibility to copy the translation from 2.6 to 2.8?
- how can I support the translation of the UI to Dutch?
- in what file and directory can I find the translation?
View 6 Replies
View Related
Oct 27, 2011
We have a minor issue with STEP translations. We keep our templates on the network, and they have a lot of customized settings. Everything is fine until we try to translate a STEP file, then Inventor wants to use the templates on the "C" drive (the ones that came with the software).
Is there a setting I can use to make Inventor use the templates on the network? I've got my "Files" setting in the "Options" pointing to the templates on the network, but Inventor still uses the ones on the "C" drive.
View 9 Replies
View Related
Dec 5, 2013
I am trying to model simple translation piece from rectangular to circle (one quarter). There is angle between rectangular side and circle side. I am able to model it very simple, but I have found that Inventor make some errors with lofted flange. Usually this type of translation piece should have flat triangles on the ends and bended triangles in corner. Unfortunately for some combinations of width/depth/diameter Inventor does not keep this rule and add some bended triangle to end edge.
Enclosed is pdf file with picture how this part should look, what is the problem and finally the ipt file is enclosed too. The part is OK with parameter SizeY=250mm and less and is wrong for bigger SizeY (for example 600mm)
View 2 Replies
View Related
May 1, 2013
I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies
View Related
Feb 6, 2013
how to bring the layer description with the translation. For example one client uses the names of level 1, level 2 etc. What is on the layer is the description for expamle LEVEL 1 / BORDER. when I translate it oputs the layer name as the description.
View 5 Replies
View Related
Feb 12, 2013
I have an assembly of a rod in a cylinder. When compressed, this rod sticks out 10mm from the cylinder. When extended, this rod sticks out 50mm. I am trying to create a drawing which shows the compressed state and extended state together.
View 3 Replies
View Related
Jul 16, 2012
I would like to show the motion of this assembly as it goes up, and rotates.
View 9 Replies
View Related
Sep 4, 2010
I am animating a ball right now, that is rolling all over the place. Would be cool to animate just the translation of an object and not to worry about rotation. Is there a way? Like.. through the expressions or set driven key? Also would be even better if rotation speed increased as the movement speed did.
View 2 Replies
View Related
Sep 30, 2013
how to make this Clamp Rod to Clamp Base Spacer Turn relationship.
this is from the Clamp Project on this site: Inventor Wizard, The Clamp Lever is turning or rotating the clamp rod into the Clamp Base Spacer but I could not simulate the Thread or the Screw motion if that is the term, or the 1 or 1/2 turn of the Clamp Rod to 1 Pitch movement, plus I can't seem to put the Rod inside the Clamp Base Spacer hole when the Contact Solver is ON, maybe modeling issue on my part.
View 1 Replies
View Related
Sep 27, 2013
Pt# 812 (From my drawing)
N: 2004294.63
E: 6057287.18
Pt# 715 (Stake point from a DXF file)
N: 254.39
E: 218.59
I built my drawing from the civils. I wanted to check the points that the surveyors are staking with a DXF file. As you can see from the above two points, our coordinates were wildly different. I brought the DXF file into my drawing as a block, and translated and rotated it to match my drawing. I had to drag it several miles, but no problem there.I imported the as-staked point file to a new group and dragged them up near my drawing, but the drawing was getting a bit crowded by then. So I made a block of all the imported points to make it easier to translate and rotate them to match my drawing and the overlayed DXF. After exploding the block of points, the points showed up in the new group. Anyhow, here's my questions:
1. How do you renumber(offset number) imported points? The option I saw was only for duplicate points. I wanted to offset them all.
2. How do you translate and rotate a large bunch of points without turning them into a block?
View 3 Replies
View Related
Jun 28, 2011
How would I find the translation of an object in world space? according to the documentation, translate is not -queryable... once I freeze transformation of a sphere theres no way for me to find its world space, but it still Has a world space because its at a location in the scene.
View 1 Replies
View Related
Dec 23, 2013
I have Autodesk inventor standard NOT the pro version. I am a Revit professional in dire need of learning Inventor. My exact steps are as follows:
1. Open assembly
2. create component - (simple wheel(cylinder) with an off axis hole in the middle so I can see if it is rotating.)
3. create component- flat surface.
4. constrain the cylinder to the flat surface via a tangent constraint
5. constrain the cylinder to the front edge of the flat surface via a mate constraint.
6. go to motion tab in constraint's, click rotation-translation, type in 10in for distance.
7.wheel does not rotate on surface like a wheel should. There is no affect of the surface on the wheel rotation.
In other words I want to get the circumference of the wheel to rotate 360 degrees as it travels pi*diameter of flat surface.
View 6 Replies
View Related
Jan 10, 2007
would be able to identify arabic fonts also.
theres this one font, i want to post it, but i wouldnt even know if u guys would know what it is. is there a website for foreign font identifying?
View 7 Replies
View Related
Nov 5, 2008
how to change text orientation from left to right to right to left in photoshop CS2 so i can type in arabic
someone said i need to buy photoshop middle eastern eddition. is that true?
View 4 Replies
View Related
Sep 24, 2007
I am working on this, and I typed this arabic word in photoshop, normally with other fonts i have no problem typing, I don't normally have this problem with any other fonts, but with this one, everytime I try and type,
The one on top is normal, the one on bottom I tried messing with the horizontal spacing but it just shows a white space where they are supposed to connect. Any help would he really appreciated. Also, This is the first time this happened with me, so I don't think I need the ME version because I do this all the time, just with different fonts,
View 4 Replies
View Related
