In Gimp 2.6 the User Interface was nearly perfect translated to Dutch. Now I upgraded Gimp (via ppa) to 2.8 and the translation is nearly complete gone.
My questions:
- is there a possibility to copy the translation from 2.6 to 2.8?
- how can I support the translation of the UI to Dutch?
- in what file and directory can I find the translation?
How can I change the language from dutch to german? Photoshop CS6!!
View 2 Replies View RelatedCan I change the language from English to Dutch?
View 1 Replies View RelatedLightroom 5 today suddenly switched to dutch, even though in teh preferences screen it's still set to english. I can't find a way to switch it back to english. It seems to have done this after I installed the app manager update (which quite frankly is pretty horrid now).
How to get lightroom back to english? I don't want to have to relearn all these technical terms.
Wondering before I get all involved and can't go on ...
View 2 Replies View RelatedI've recently been looking into getting a Canon EOS Rebel T3. I noticed that it can take RAW images and I was just wondering if GIMP supports that.
View 6 Replies View RelatedI am preparing a Photoshop tutorial for my Finnish students, I use my Adobe programs in English and some of my students probably do as well. But I would like to have the list of Menu vocabulary as reference for those who use Finnish language.In other words, I want to provide them with a mini dictionary ENG-FIN of the Menu. For example Open-Avaa, Save-Tallentaa, etc.
Problem is that translating doesn't always work, so I need to be sure I use the same terminology used by the program in the Finnish version. Is that available somewhere?
We have a minor issue with STEP translations. We keep our templates on the network, and they have a lot of customized settings. Everything is fine until we try to translate a STEP file, then Inventor wants to use the templates on the "C" drive (the ones that came with the software).
Is there a setting I can use to make Inventor use the templates on the network? I've got my "Files" setting in the "Options" pointing to the templates on the network, but Inventor still uses the ones on the "C" drive.
I am trying to model simple translation piece from rectangular to circle (one quarter). There is angle between rectangular side and circle side. I am able to model it very simple, but I have found that Inventor make some errors with lofted flange. Usually this type of translation piece should have flat triangles on the ends and bended triangles in corner. Unfortunately for some combinations of width/depth/diameter Inventor does not keep this rule and add some bended triangle to end edge.
Enclosed is pdf file with picture how this part should look, what is the problem and finally the ipt file is enclosed too. The part is OK with parameter SizeY=250mm and less and is wrong for bigger SizeY (for example 600mm)
I have a mockup designed in English which needs to be translated in several other language for our sales team to use in the presentations.Translating to French, German and Chinese worked out fine, bur for some reason this is not working for Arabic text.I have a translated Word document from which I'm pasting the translation into my original English version, for which I would the realign as needed for the layout.
The problem is that, for one, I can't seem to find a matching default font in Photoshop which translates well (for example, for Chinese used "Microsoft Yahei", and "Helvetica" for German).I have over a dozen Arabic font options to choose from, but something still seems wrong when comparing.
I'm not trying to turn my whole work space in Arabic, put need to copy/paste text from Word into Photoshop the realign to the right (basically flip it)What am I missing here? Are there some specific settings I need to modify to have this work?
I am using inventor 2012 and am trying to import my MDT(2002) drawings but when I try the translation process I receive an error message that says Mechanical Desktop must be installed. I currently of both Inventor and MDT installed and both operate correctly.
View 4 Replies View Relatedhow to bring the layer description with the translation. For example one client uses the names of level 1, level 2 etc. What is on the layer is the description for expamle LEVEL 1 / BORDER. when I translate it oputs the layer name as the description.
View 5 Replies View RelatedI have an assembly of a rod in a cylinder. When compressed, this rod sticks out 10mm from the cylinder. When extended, this rod sticks out 50mm. I am trying to create a drawing which shows the compressed state and extended state together.
View 3 Replies View RelatedI would like to show the motion of this assembly as it goes up, and rotates.
View 9 Replies View RelatedI am animating a ball right now, that is rolling all over the place. Would be cool to animate just the translation of an object and not to worry about rotation. Is there a way? Like.. through the expressions or set driven key? Also would be even better if rotation speed increased as the movement speed did.
View 2 Replies View Relatedhow to make this Clamp Rod to Clamp Base Spacer Turn relationship.
this is from the Clamp Project on this site: Inventor Wizard, The Clamp Lever is turning or rotating the clamp rod into the Clamp Base Spacer but I could not simulate the Thread or the Screw motion if that is the term, or the 1 or 1/2 turn of the Clamp Rod to 1 Pitch movement, plus I can't seem to put the Rod inside the Clamp Base Spacer hole when the Contact Solver is ON, maybe modeling issue on my part.
Pt# 812 (From my drawing)
N: 2004294.63
E: 6057287.18
Pt# 715 (Stake point from a DXF file)
N: 254.39
E: 218.59
I built my drawing from the civils. I wanted to check the points that the surveyors are staking with a DXF file. As you can see from the above two points, our coordinates were wildly different. I brought the DXF file into my drawing as a block, and translated and rotated it to match my drawing. I had to drag it several miles, but no problem there.I imported the as-staked point file to a new group and dragged them up near my drawing, but the drawing was getting a bit crowded by then. So I made a block of all the imported points to make it easier to translate and rotate them to match my drawing and the overlayed DXF. After exploding the block of points, the points showed up in the new group. Anyhow, here's my questions:
1. How do you renumber(offset number) imported points? The option I saw was only for duplicate points. I wanted to offset them all.
2. How do you translate and rotate a large bunch of points without turning them into a block?
How would I find the translation of an object in world space? according to the documentation, translate is not -queryable... once I freeze transformation of a sphere theres no way for me to find its world space, but it still Has a world space because its at a location in the scene.
View 1 Replies View RelatedI have Autodesk inventor standard NOT the pro version. I am a Revit professional in dire need of learning Inventor. My exact steps are as follows:
1. Open assembly
2. create component - (simple wheel(cylinder) with an off axis hole in the middle so I can see if it is rotating.)
3. create component- flat surface.
4. constrain the cylinder to the flat surface via a tangent constraint
5. constrain the cylinder to the front edge of the flat surface via a mate constraint.
6. go to motion tab in constraint's, click rotation-translation, type in 10in for distance.
7.wheel does not rotate on surface like a wheel should. There is no affect of the surface on the wheel rotation.
In other words I want to get the circumference of the wheel to rotate 360 degrees as it travels pi*diameter of flat surface.
I am working with a device that can import plt files & it converts that to a tool path in G-Code. works like a champ. but some data, most text (single line font), is converted two times. This makes the tool do the work twice and its pretty inconvenient to manually delete the doubled up G-Code Lines.
I am pretty sure the duplication is done at the Corel export level and not in the translator of the machine. I have been working with the export settings with no success.
My current goal is to specify the rotation and translation of an object using a text file full of numbers. I have been told that I should import a "move" file. However, I can't seem to find any kind of reference about the move file format or how to use it. I see in the import dialog box that there is a file type called "move" but I don't know how to format the data that I put into the "move" file.
Also, I tried to export a "move" file so I could take a look at what Maya generates, but I keep getting the error "// Error: Could not save file "C:/My Documents/maya/projects/body_in_ocean/scenes/examplemove.mov".
I created a group with my object in one file, referenced it in my working file, moved the group around and set some keys in the working file, but I can't seem to export any move data. How to get this to work?
A drawing with hundreds of layers should be simplified for our customer by decreasing the numbers of and renaming the layers (there is yet no target file existing). In order to solve this, I generated group filters and assigned every single layer to them (all printing properties are assigned to objects). The layer groups show the desired layer structure after the transformation (still a three-digit number).
Unfortunately, the LAYTRANS dialog doesn't let me choose layers by group filters or remarks. It seems as all the work was for the birds.
Is there any way to translate my layers using filters or remarks?
I use AutoCAD Civil 3D 2010.
Immediately after installation of PS CS6 the application correctly detected my grafics adapter AMD HD7750 and in the PS GPU settings the grafic processing unit support was activated. Now this option is deactivated and cannot be activated any more. PS6 states that using this feature is not supported by the standard edition, what is surprising as I had installed the same edition on my notebook (with a AMD radeon HD7400M) and there it works fine, and initially it had worked on my PC, too.
On my PC the last action I can remember was to attach a second monitor to the DVI port of the onboard grafics card Intel HD4600. (my system has as well an Intel card onboard and an AMD Sapphire PCIe grafics card)The windows primary desktop is assigned to the first monitor which is connected via DVI with the AMD HD7750 card.Would you recommend to uninstall and reinstall PS CS6 on the PC or is another easier solution for this problem available ?
Recently we upgraded from CS to CS3 but for the life of me, I can't find any COM assemblies (Interop DLLs) to use in CS3 for automating Photoshop.
Anyone knows if this is removed? Or is it included in certain versions of CS3 like the extended one?
I need this to be able to compile one of our tools from CS to CS3.
I can't find anything about .dng support in the Help Files. Or is it only supported in the Pro version?
View 2 Replies View RelatedI upgraded to LR4.3 and CS4. When I open a raw image in CS4 from LR4.3, the image quality is horrible. A message appeared that I need camera raw plugin 7.3, however, this is not available for CS4. Is there a solution to this problem or do I need to upgrade to CS6?
View 5 Replies View RelatedI can't seem to Photoshop to show 3d option while using my gts 240, does this card is compatible?
View 2 Replies View RelatedI have installed Photoshop CC and updated the Camera RAW plug-in to version 8.1. I am still not able to view RAW files from my Nikon D7100. According to the Camera Raw page on the Adobe website, I should be able to open the files.
View 5 Replies View RelatedWill CS 4 support Win 7 ??
View 3 Replies View RelatedDoes Photoshop CC support multi GPU like Cinema 4D? Would be nice to read a "Yes"
View 3 Replies View Relatedwhether Video Studio could handle the video file format from a high end Panasonic prosumer camcorder. It seems the question I should have asked is whether Video Studio X5 can edit and export files in the new AVCHD 2.0 format, which is used not only by Panasonic but by other camcorder manufacturers and which, according to an email from a reviewer for camcorderinfo.com is not compatible with a large number of video editing software programs. Can X5 handle AVCHD 2.0?
View 9 Replies View Related
