Does Photoshop have the ability to preview a texture that will be tiled?
For Example:
I am modifying a brick picture I took to use in SketchUp and want it to tile seamlessly. I can keep going back and modifying, then placing it in SketchUp, modify more, place it... until I get it right. However it would be nice to be able to see it in Photoshop.
Just need to create this as a background tile for a web page for a site that is for a rock climbing photographer friend of mine.
Should be easy enough but I just cannot get a really good looking effect.
To be honest any kind of 'stone' effect will do, it just has to look good and not like sandpaper.
How does one create a texture similar to this?
View 2 Replies View RelatedFor my 3D scene, I have to use a texture file on the floor. If I use the only file, than it looks really boring and below par. What I want is, I want to generate some (around 6-8) texture files within the original texture file - so the colors of all the texture files remain same but only the texture varies.Likewise there are more than 500 texture files and I just can't do them manually. Is there any way out to do this in Photoshop?
View 3 Replies View RelatedI have a lava texture and a ground texture. I'd like to be able to make some cracks on the ground texture that would show through the lava texture below it. Something like a cracked mud look. I would be using this for a game I'm making form some terrain textures. Are there any plugins that would aid in making these transparent cracks and perhaps even add depth to the cracks?
I guess a spider web where the spider was on crack would be something I'm looking for. Similar to the following image:
Lava Ground
I have Photoshop 6.0 and all I want to learn right now is how do I take an image and make a tiled background with it? Please answer in the easiest way possible, I have trouble even finding the tools in photoshop. I can use Picture it and tile very slowly myself piece by piece, but I am sure that there is a simple way to push a button and have it done for me with photoshop.
View 3 Replies View RelatedI want to tile this as a pattern, if I follow the traditional off-set routine I will destroy the clean pattern as so commonly found on pages such as; this.
View 19 Replies View Relatedi have used batch process to make a whole bunch of photos one size. I need to create a single 'photo wall' jpg out of them in which they're all tiled, the long way of doing this is to obv open them all and copy, paste into the psd, then flatten, but thats really, really time consuming. If photoshop had any type of auto import & tile feature? I may have to do this a 2nd time with 1000's of images.
View 10 Replies View RelatedI've noticed that this background texture is used quite a bit as html background tile. I can't for the life of me figure out how to create it. Is it a filter or a technique?
View 3 Replies View Relatedthe final image is in flash, but this effect was pasted from 19 different images rendered by some kind of "tile flip" effect in Photoshop.
View 4 Replies View Relatedi'm trying to get a bathroom tile effect. just a wall of tiles with beveled edges, texture and lighting. is there a logical or simple way to achieve this?
View 1 Replies View RelatedI have just got my web page backgrounds from various sites across the net. Now I need to make my own as the background I need cannot be found.
how to make tilable images that are seamless? A very long time ago, I had a program that would paint on one side as I paited on the other (making the image tile seamlessly). However I do not remember the name of the program and was hoping that PS will do it.
I followed the directions, went to the "window" tab in the top tool bar, went down to "images" then over to the next submenu. The word "tile" appears but it is grayed out and I can't access it no matter what I do.
View 4 Replies View RelatedI have a procedurally generated image (a bird's eye terrain map). The edges wrap-around (I can tile the image without seams) I applied the Sponge artistic filter on it, but the edges don't match anymore.
Is there any way to get a Photoshop filter to recognize the opposite edge's pixels so that it maintains my tile effect?
I'm using photoshop cs6 to create textile designs, and occassionally, (it hasnt happened with every tile) when i change the image size of my tile e.g. from 15cm sq to 10cm sq, then try to repeat the tile it forms thin lines between the tiles?
heres the tile repeated after ive changed the image size and you can see the thin lines...when i zoom in on the tile edges where the line has formed it looks like this....almost as if theres empty pixels that can then be coloured in.
i dont think its a problem when creating the tile because before i changed the image size it repeated fine with no lines, its something thats happeneing when the image size is altered.
I use tile on 95% of my jobs. It is a waste of space when I tile all vertical pictures because I do not have the choice of Tile Vertically or Tile Horizontally as on previous version of Photoshop.
I tried the different choices offered on "arrange document" and there is non with the vertical choice, unless you choose one that displays my photos some on one size and the remaining or two or three remaining, a different size to fill up the screen.
I am using Adobe Fireworks CS3, but I hope some of you will still be able to help me. I've designed a ceramic tile using 4 layers. It looks authentic (I've been in the flooring biz for 35+ years, I know), but it lacks the sheen of a semi-gloss tile seen on the floor with natural light coming from a North-West facing window (or upper left side as seen on the screen). It's a very light colored tile.
View 1 Replies View Relatedi`m looking on my hardrive for the original seamless tile I used to create a pattern style but cannot figure out how to find it.
View 5 Replies View RelatedFor the orange ring pic:
I was thinking about grabbing the luminosity of the waterfall and putting it above the replacement tiles. (Using various forms of blending.)
here are the samples and what I did. (i know the tiles are not distorted properly. I was trying to get the see through effect of the water first.)
I've never done this type of thing. (I've read about it before.) I want to make it look good since I won't be at this temp job long and I want to make a good impression. (So they will ask for me to come back later on.)
For the patio pic:
i'm not sure what to do about the shadows. I'm thinking of the same technique for the water edge. And I will be using 2 different tiles to replace the existing ones.
remember in mario paint how you could make stamps using pixels?
well i'm trying to make a tile pattern outta pixelated photos of paintings.
i tried resolution changes but then the image size obviously gets too small to work with.
Have managed to create a AutoHotkey script for keyboard shortcut to tile via Window/Image/Tile but on first use defaults to horizontal. Once changed via Arrange 2up it remembers. Is there a registry hack or a tip or trick? I do side by side all the time and although there is the workaround it's moderately irritating.
View 4 Replies View RelatedA feature notably absent from the Oil Paint filter is any way to temporarily disable the effect (e.g., not preview it).I happen to like using Oil Paint to make refllections in the surface of water smoother and more "liquid" (which involves turning off the "Shine"), and it would really be nice if I could easily gauge the amount of the effect easily by blinking back and forth between original and processed image with a quick "disable preview" functionality.
With most standard filters, one can either uncheck a [ ] Preview box, and/or click the mouse button down on the image to temporarily show what the image is like without the effect.Yes, I know I can turn the Stylization down to 0.1 and see how a very minimal amount of the effect can be applied. And I can look at the original image in Photoshop proper, but of course that can't be zoomed while the Oil Paint filter is active.
Also, the zooming / panning seems kind of stiffly implemented.In summary, the more or less standard and expected filter features I'd like to see added to this (new class of) GPU-accelerated filters are:Preview/No Preview capability. It doesn't have to update Photoshop, just the preview display in the filter itself. I suggest a [ ] Preview checkbox and/or an on-mouse-click temporary effect disable.
Modal click and drag Zooming vs. Panning - i.e., based on a Zoom or Pan function selected (e.g., via an icon along the left) vs. having to hold modifier keys down. I personally would want it set to Zoom by default, not Pan. Since the filter has scroll bars (a Good Thing), I would have thought Zoom would have been a better default as it is. I have implemented these things in my own GPU-accelerated plug-ins, so I know that all the infrastructure Adobe needs to support them is already in there. These changes are controls only and should be trivial to implement.
With either Photoshop CS6 or Photoshop CC, opening an unadjusted image of a building and applying Image/Duplicate produces an exact duplicate of the image. If arranging the images using Window/Arrange/Tile All Vertically (or Window/Arrange/2-up Vetical) one of the images will present with a perspective correction. Whichever image that was selected when Arrange was applied receives the perspective correction.
View 6 Replies View RelatedI'm looking for a more realistic way of creating grout. Basically what I have is an underlying seamless texture with a 2px grid sitting on top (pillow emboss)...it's just not realistic enough though. I'd really like to find a way to add some jaggedness to it so the edges aren't so perfect. I've tried the distort/ripple filter, but that really didn't look good...it kept the corners sharp. I also thought the Custom Shape Tool may work if it was one long squiggled line tiled into a grid, but that won't necessarily look great either since the tile's corners won't be rounded.
I'm looking for a quick workflow if possible, as the tile size may vary (6x6, 8x8, 12x12, etc.).
I've used the Fill>Pattern to tile my seamless patterns tons of times and never had this issue. Suddenly , it started making each tile on the large canvas a different color when I apply Fill>Pattern. At first I thought it was a tip or guide to see the repeat edges , but it shows up in print preview too. What did I do and how do I correct it?
View 4 Replies View RelatedI recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
I'm trying to edit a set of titles made in Premiere in After Effects, and after I import the file (as a Premiere file) then load the sequence into the timeline; the preview is just a black screen throughout the entire preview. The titles never show up.
View 2 Replies View Relatedhow do i add an image to tile in the background?
I use xara web designer 6
looked thru videos didn't see anything about this.
The Material editor by Nitrous, continue to tile the bitmap even if TILE is unchecked.
View 6 Replies View RelatedWhere is Tile Cache Size
View 4 Replies View RelatedI just noticed that a large amount of RAM has been allocated for "Tile Cache Size" under GIMP preferences. What is tile cache size, and how much is generally needed?
View 1 Replies View Related