I am using PS7 to create a logo. When I add a layer with text and use the tool to arc the text, the text appears to look very rough around the edges. If I do not arc the text, the edges of the text is smooth. I've also tried to arc the text in MS Word using WordArt and it retains its smoothness there, but once copied and pasted into PS7, it becomes rough again. This makes the logo look a little unprofessional.
Is there a specific type of font I should be using as opposed to a TrueType or is there something else I can do?
I am running 2005 ADT. In certain drawing, but not all the edges of my text appear very rough. It doesn't seem to have much effect on the plotting, but it tears at the eye and is distracting. I think its some kind of variable because it doesn't occur is every drawing.
When I open up an MTEXT editor the text looks correct.
I am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
trying to get CS4 Design Premium to install. I finally managed, with the considerable help of a tier three Support Engineer. Since then I've had about a week's exposure to Photoshop CS4. Here's a list of things I don't like and/or those that don't work:
1) Program always crashes when I try to save a GIF file or try to use any of the new 3D tools.
2) I like two-across tool palette. When I drag workspace to left, it covers up this palette.
3) I like to leave three palettes open on the right, History, Characters and Layers. For no earthly reason that I can fathom the Layers palette has gotten considerably wider, and it cannot be reduced horizontally. Oh yes, I could reduce these three to icons, but then I'd be constantly clicking to open them and clicking to close them.
4) Open palettes have foreground precedence. This means that when I try to enlarge my workspace to the right, the workspace scroll bar disappears underneath the palettes.
5) The essentials button is destructive. I found this out the hard way when I clicked it and it wiped out a newly customized workspace. Now I know to save my customized workspace immediately upon completion.
6) Why did Adobe add the Adjustments button. It just creates an extra step when making adjustments. CS3 was smart enough to pop up the correct controls when adjustments were being made. Example: create New Adjustment Layer > Threshold. On my copy of CS4, I have to click Adjustments before the control shows up.
7) The new toolbar (at top of screen) wastes considerable space and is not deselectable. Hint courtesy of Support: Save your custom workspace with a very short name 2-3 characters; then this toolbar will combine with the menu bar.
8) Scrolling through highly magnified images is abysmally slow - much slower than it was on CS3.
9) The clone brush is less accurate in CS4, and it doesn't always turn off when one is finished cloning.
10) None of my CS4 files installed with responsive, indexed Help files. Now, every Help request sends me to a sluggish web site where there are no indices, poorly organized information, and in some cases just a message that Help area is under development.
11) I haven't been able to get the Patch tool to work correctly.
12) When program crashes (not always while attempting to save GIFs or 3D), it does so with generic, uninformative error message. In one week, I have had more Photoshop CS4 crashes than I ever experienced during the lifetime of CS3.
13) Why did the installer leave 34 superfluous language items (ones in anything other than US English in my case) in both the Legal and Lmresources folders? The product is bloated enough without oversights like that.
How many more will I find during the next week? I don't know, but I'm sure there are more to be found. How many of those that I did notice are due to the dreadful suite installer? I don't know the answer to that one either, but I suspect the installer may well have played a role.
I'm sure many will disagree, but IMHO Photoshop CS4's user interface is godawful compared to its predecessors. I can't find a single thing that can be accomplished with less mouse activity or keystrokes than earlier versions, but I have found quite a few things that demand more.
I was fortunate enough to have my installation issues addressed by one of Adobe's top support engineers. Had it not been for that, I'm reasonably certain I'd still be trying to install CS4. I've been using Photoshop since version 3, and the Creative Suites going back to the first one. This is the first time I've ever felt that quality assurance was completely ignored for the sake of meeting a self-imposed release schedule.
As I remarked in one of my earlier email exchanges with Adobe support, "I wish that every software Product Manager would study the reasons why Vista and Office 2007 have gotten such lukewarm receptions." I'm afraid the CS4 team didn't learn from Microsoft's mistakes.
Well I am new here and this is my first post. Anyway, I made a shape with the "Polygonal Lasso Tool" and the edges are rough and I am wanting to know of a way to smooth out the roughness so I have good looking edges.
I have a technique for creating a 'rough' black border on photos, but it can't be used with actions. (By rough I mean a similar effect to that which used to be reproduced when darkroom printing from a full frame 35mm negative).
Can anyone please suggest a technique to produce such an effect which I could record into an action, it would have to work with both horizontal and vertical photos, though the longest edge size would remain the same.
Did the programmers make the pen tool in CC worse or am I missing something. If I draw a path in cc and stroke it with a 2px hard brush the line is extremely jagged/rough. If I do it in CS6 that I own, the line is smooth and very fine. What gives?
Recently I created an elevation which included a door with leaded glass. When I originally drew the arcs and circles they were symmetrical and smooth, but now they are rough and ugly.
On 2012 and have run into a problem with curved lines...all curved lines circles etc. The intial draw properly but later when I go back to that portion of the drawing they are converted to rough lines...not a curve anymore segments of straight lines...cant seem to prevent if from happening.
I am trying to animate a spline or jointed border object over an irregular surface.I want to add particles to the spline in the end to try to simulate a fire burning outward across a terrain.
I tried booleaning out a border and while that works, when I add particles to it, it overwhelms my computer. I tried using shapeMerge but that doesn't quite do what I want either. Itoo's glue plugin conforms an object to the terrain but doesn't allow me to animate it.
I asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
I'm getting some white edges on my artwork, very fine ones. I googled a bit the problem, but couldn't find anything useful.
This is what I'm talking about:
Can you see them? They appear in the red figures. Looks somewhat pixelate with white color and sometimes black.
Here another example:
Because of the angle, I gues, the white edges on the red shape don't look as disturbing or pixelate as in the other picture. I even thought they weren't there, until I gave a closer look (click on the picture to see it better).
Basically whilst using a tablet to draw the outline, i want to fill in the space with a colour. however, this leaves a pixellated edge around the fill, resulting in the piece looking far from perfect. how can i get around this without having to hand fill each individual pixel? is there any way to turn the sensitivity on my tablet off on the tool so that i just draw thick black lines instead of ones that get lighter around the edges?
I'm practicing using Coreldraw and made a logo with a transparent background. It's a combination of rectangles and text. I exported the logo as a png. Everything looks fine in corel, but when I upload it to the web the edges are very ragged on the rectangles and text. I tried it with and without converting to curves and the same thing happens.
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
trying to copy txt from an outside text editor and pasting them into an open, editable text layer in my workspace. The problem is that I can COPY the text fine, but when I click over to PS to paste it into the open editable text layer it either pastes the previous text from my clipboard OR it won't paste anything at all. I can then go into any other text field on a browser, spreadsheet document, a different text editor, notepad, etc and successfully paste the proper batch of text I wanted to paste into PS. Sometimes I have some rather large files open 50+megs when I notice this happen. I have to save my work and close out entirely of PS and then open it again before I can begin editing my original document again and successfully paste the text into the open editable text layer. This may last for a few COPY/PASTE sessions of additional text in additional text layers, but then begins displaying the symptoms I described above.
I am on Win7 on an AlienWare M17XR3 laptop with 16G RAM and AMD Radeon HD 6900M Series display adapter.I assume it's either in my PS performance settings which I have PS using 10413MB RAM and has over 350G scratch disk space. If it's not that I guess my laptop system performance settings which I've never tinkered with since I purchased it.
Text is allowed only on the outside of a rectangle shape. The text cursor disappears when I try to enter it into the rectangle and when I place it on the edge of the rectangle, it rurns into a slanted "A" and allows texting on the border of the rectangle. Corel Paint Shop Photo Pro X3 (build date Sept 7, 2010). This software came with my new HP Pavilion dv7.
When you centrally allign text horizontally and vertically in a text box, the text sits slightly high of the centre. Is there any way of setting an action or setting to deal with this rather than adjusting by eye every time?
I have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
When I insert text with either the TEXT command or MTEXT command, the text is displayed mirrored. This doesn't seem to have anything to do with the MIRRTEXT variable because that is used when I'm actually mirroring the text. In my case, the text is mirrored as soon as I insert it. How can I get it back to normal? Is there a variable I'm missing?
