I am running 2005 ADT. In certain drawing, but not all the edges of my text appear very rough. It doesn't seem to have much effect on the plotting, but it tears at the eye and is distracting. I think its some kind of variable because it doesn't occur is every drawing.
When I open up an MTEXT editor the text looks correct.
Downloaded g'mic plug-in ver 1.5.6.1 just yesterday. I was looking to use "Anisotropic smoothing". It takes the rough edges off text.
Why it's not on the plug-in and or any other way to remove rough edges from text. To be used for a logo.
I tried the following in Illustrator,
So basically, I created coloured text inside Adobe Illustrator and however much I zoom into the text, the text always appears to have smooth edges. Once I click on 'Save For Web', the edge all around the text becomes rough and aliased. I chose GIF and PNG, but it still happens. The text is on a transparency background. The same problem applies to images when I am creating a logo.
how to achieve the effect of rough and worn.
View 2 Replies View RelatedWell I am new here and this is my first post. Anyway, I made a shape with the "Polygonal Lasso Tool" and the edges are rough and I am wanting to know of a way to smooth out the roughness so I have good looking edges.
If you can give me some tips or advice.
I'm getting some white edges on my artwork, very fine ones. I googled a bit the problem, but couldn't find anything useful.
This is what I'm talking about:
Can you see them? They appear in the red figures. Looks somewhat pixelate with white color and sometimes black.
Here another example:
Because of the angle, I gues, the white edges on the red shape don't look as disturbing or pixelate as in the other picture. I even thought they weren't there, until I gave a closer look (click on the picture to see it better).
This will be something printable.
I'm using CS6 on OSX 10.9.1
Basically whilst using a tablet to draw the outline, i want to fill in the space with a colour. however, this leaves a pixellated edge around the fill, resulting in the piece looking far from perfect. how can i get around this without having to hand fill each individual pixel? is there any way to turn the sensitivity on my tablet off on the tool so that i just draw thick black lines instead of ones that get lighter around the edges?
i have included an example.
I'm practicing using Coreldraw and made a logo with a transparent background. It's a combination of rectangles and text. I exported the logo as a png. Everything looks fine in corel, but when I upload it to the web the edges are very ragged on the rectangles and text. I tried it with and without converting to curves and the same thing happens.
View 11 Replies View RelatedI am having difficulty with the text in my drawings. When writing dtext or dimensions on my drawings in modelspace the text appears rough/rugged in both model space and layout space. I am using True Type (Arial) as the font. I've read older posts where people have suggested checking in Properties that the text is really laying down at 0 in the Z plane which it is. Some say using True Type is the problem, but just last week I was doing what seemed to be the same operation and I had no problems at all.
View 7 Replies View RelatedI need help with smoothing my text cause when i make it bigger it goes pointy with sqaures ! :S is there a way of making it smoother?
View 3 Replies View RelatedI am using PS7 to create a logo. When I add a layer with text and use the tool to arc the text, the text appears to look very rough around the edges. If I do not arc the text, the edges of the text is smooth. I've also tried to arc the text in MS Word using WordArt and it retains its smoothness there, but once copied and pasted into PS7, it becomes rough again. This makes the logo look a little unprofessional.
Is there a specific type of font I should be using as opposed to a TrueType or is there something else I can do?
Recently I created an elevation which included a door with leaded glass. When I originally drew the arcs and circles they were symmetrical and smooth, but now they are rough and ugly.
(See attachment)
On 2012 and have run into a problem with curved lines...all curved lines circles etc. The intial draw properly but later when I go back to that portion of the drawing they are converted to rough lines...not a curve anymore segments of straight lines...cant seem to prevent if from happening.
View 3 Replies View RelatedWhat do you think you be the right way to make a surface rough and uneven, as in the picture below? Or should it be done at some later stage?
View 6 Replies View RelatedI am trying to add some text to the face of the part, no issues other than the projected edges are displayed as well, can the projected stuff be hidden?
View 1 Replies View Relatedall my fonts are very pixilated when I print out my invites.
Photos look good, but even the simplest fonts are rough.
What do I need to change?
how to make rough metal. To be more exact, a rough metal border, with screws in it and such.
View 6 Replies View Relatedtrying to get CS4 Design Premium to install. I finally managed, with the considerable help of a tier three Support Engineer. Since then I've had about a week's exposure to Photoshop CS4. Here's a list of things I don't like and/or those that don't work:
1) Program always crashes when I try to save a GIF file or try to use any of the new 3D tools.
2) I like two-across tool palette. When I drag workspace to left, it covers up this palette.
3) I like to leave three palettes open on the right, History, Characters and Layers. For no earthly reason that I can fathom the Layers palette has gotten considerably wider, and it cannot be reduced horizontally. Oh yes, I could reduce these three to icons, but then I'd be constantly clicking to open them and clicking to close them.
4) Open palettes have foreground precedence. This means that when I try to enlarge my workspace to the right, the workspace scroll bar disappears underneath the palettes.
5) The essentials button is destructive. I found this out the hard way when I clicked it and it wiped out a newly customized workspace. Now I know to save my customized workspace immediately upon completion.
6) Why did Adobe add the Adjustments button. It just creates an extra step when making adjustments. CS3 was smart enough to pop up the correct controls when adjustments were being made. Example: create New Adjustment Layer > Threshold. On my copy of CS4, I have to click Adjustments before the control shows up.
7) The new toolbar (at top of screen) wastes considerable space and is not deselectable. Hint courtesy of Support: Save your custom workspace with a very short name 2-3 characters; then this toolbar will combine with the menu bar.
8) Scrolling through highly magnified images is abysmally slow - much slower than it was on CS3.
9) The clone brush is less accurate in CS4, and it doesn't always turn off when one is finished cloning.
10) None of my CS4 files installed with responsive, indexed Help files. Now, every Help request sends me to a sluggish web site where there are no indices, poorly organized information, and in some cases just a message that Help area is under development.
11) I haven't been able to get the Patch tool to work correctly.
12) When program crashes (not always while attempting to save GIFs or 3D), it does so with generic, uninformative error message. In one week, I have had more Photoshop CS4 crashes than I ever experienced during the lifetime of CS3.
13) Why did the installer leave 34 superfluous language items (ones in anything other than US English in my case) in both the Legal and Lmresources folders? The product is bloated enough without oversights like that.
How many more will I find during the next week? I don't know, but I'm sure there are more to be found. How many of those that I did notice are due to the dreadful suite installer? I don't know the answer to that one either, but I suspect the installer may well have played a role.
I'm sure many will disagree, but IMHO Photoshop CS4's user interface is godawful compared to its predecessors. I can't find a single thing that can be accomplished with less mouse activity or keystrokes than earlier versions, but I have found quite a few things that demand more.
I was fortunate enough to have my installation issues addressed by one of Adobe's top support engineers. Had it not been for that, I'm reasonably certain I'd still be trying to install CS4. I've been using Photoshop since version 3, and the Creative Suites going back to the first one. This is the first time I've ever felt that quality assurance was completely ignored for the sake of meeting a self-imposed release schedule.
As I remarked in one of my earlier email exchanges with Adobe support, "I wish that every software Product Manager would study the reasons why Vista and Office 2007 have gotten such lukewarm receptions." I'm afraid the CS4 team didn't learn from Microsoft's mistakes.
i need help on text that i just cant seem to get smoth edges. i tried saving it as gif, jpg,tiff. the thing is that i need transparency, not for the web but for a restaurant menu, when i save as gif, i get extremely bad edges, now as jpg the image is ok but i have the white background. im doing the layout in publisher, where i could click the with BG as transparent but i still get jagged edges.
View 1 Replies View RelatedHow do they produce a rough textured background like it this image...
Background Image
Am I right in assuming some noise filters need be applied?
In X6 text shows up on the screen with ragged edges unless selected. This does not allow an appropriate visual assessment of a full page.
I don't recall if this happened in X5, but I am pretty sure it didn't happen in X3.Is there any mechanism of turning this "feature" off. It is completely unwanted in my view.
I'm trying to figure out how to fill this text with smooth edges. The blue part is the font I'm using and the white part is what I filled, using the paint bucket. You can see some jagged/uneven edges between the white and blue. I have tried different blurs, median at low radius, smart blur and several other things. I have even tried those things on just the blue text before filling with the paint bucket and it still shows up like this.
Linked to oversize image
how can I make the roughened edge for the digital scrapbook paper shown in my attachment?
View 9 Replies View RelatedI have a technique for creating a 'rough' black border on photos, but it can't be used with actions. (By rough I mean a similar effect to that which used to be reproduced when darkroom printing from a full frame 35mm negative).
Can anyone please suggest a technique to produce such an effect which I could record into an action, it would have to work with both horizontal and vertical photos, though the longest edge size would remain the same.
Does anyone know of a tute for doing water with large waves and spray?
View 1 Replies View RelatedI am trying to animate a spline or jointed border object over an irregular surface.I want to add particles to the spline in the end to try to simulate a fire burning outward across a terrain.
I tried booleaning out a border and while that works, when I add particles to it, it overwhelms my computer. I tried using shapeMerge but that doesn't quite do what I want either. Itoo's glue plugin conforms an object to the terrain but doesn't allow me to animate it.
I asked a question a couple days ago regarding the effects of old style print. Although, I know a lot of it is done manually, I was wondering if it could also be done digitally in either Illustrator or Photoshop.
In Illustrator I created 10 brush strokes from a jagged pattern found in a vintage element to represent the scratch board or printing effect. In Photoshop you can kind of create the effect from switching to a Bitmap mode.
However, Photoshop is a pain to bend the halftone lines to fit the curves and they are all evenly spaced. Illustrator works better for laying ou the lines based on the tonal value, but using a brush for the strokes becomes a little distorted.
How to achieve the jagged edge effect show in this very simple image? The edges and lines are not all the same so I don't want to use the ripple tool in PS and the wrinkle Tool makes them too ragged.
I find it hard to believe this style is only accomplished through scratch board or printing techniques. Even traditional pen and ink doesn't really work like this. I find way too many images, free ones too, like the one below to have it be only done with scratch board.
I am trying to re size my text layer so that the borders would align with the edges of the text, but every time I adjust the upper part of the layer the text itself would shift downward, cutting off the lower part of the text. Is there a way I can conveniently adjust the layer so that it looks like the text fits the layer.
Example I am trying to achieve is something like this.
The problem I keep getting is this.
How do I make a text book with edges that bleed into the background?
View 8 Replies View RelatedDid the programmers make the pen tool in CC worse or am I missing something. If I draw a path in cc and stroke it with a 2px hard brush the line is extremely jagged/rough. If I do it in CS6 that I own, the line is smooth and very fine. What gives?
View 5 Replies View RelatedI thought this was going to be a piece of cake in the new Illustrator CC but I am having a few unanticipated issues:)I need to create some vector tire images with different edges, such as the top one in the image below.So I thought this would be SO easy by simply creating a pattern brush in Illustrator and then using that for the outside. So I created the shape you see in the middle image below and created a pattern brush with this shape.I then created an ellipse and used the new brush for the outline.
All of those are open paths...it has taken the shape and applied it to the outline but has kept each shape separate, so I am not able to fill the circle in black. I could of course go in and manually join each little corner separately where the little shapes meet but this will take FOREVER with all the images I have to do.
