Photoshop :: Slight Color Difference
Nov 19, 2008
Using Photoshop CS4 on Vista with a dell monitor.
I have the standard dell color profile set in windows for the monitor.
Whenever I save "for web and devices" I get a color difference between the actual webpage colour and the colours in the picture. So I searched about color profiles and I gather (I find this profiling thing very confusing) that I should set my photoshop profile also to the dell profile. So I did, but there now still is a slight difference.
For example, the color I use in photoshop is #12141A and once saved it shows up as #13151B
View 1 Replies
ADVERTISEMENT
Mar 1, 2013
I have been shooting RAW for a while and have notice that after I import the images and then start to view them in the Library Module I will see a slight color and quality shift - almost looks like a white balance shift but not quite. I was thinking that perhaps there was some automatic preset being applied but I don't have any presets at all.
I am shooting with a Canon 1DX as well as 7D. I have not checked to see if I get this situation with the 7D, but I know for sure that I get it with the 1DX.
Today I was reviewing some images in Bridge and decided to open one of them in Camera RAW. At that time I discovered that the camera's Image Style Settings were available, Faithful, Standard, Portrait, etc. I noticed that the images did not have one of the camera styles applied to them but rather the Adobe Standard Style. At that point from within RAW I selected one of the camera's styles and bingo thats the kind of shift I am seeing when I first view an image in LR4 Library.
So as far as I can tell the RAW images are getting the Adobe Standard style applied in LR. I have no idea if this is a default behavior of if I have done something to cause it. I'm also thinking that perhaps LR does not necessarily apply the Camera's Styles automatically even though the particular style has been set in the camera -- perhaps is not imported as part of the metadata during the import and thus defaults to the Adobe Standard.
1. Should I expect LR4 to apply the Style as set from the camera automatically or not at all?
2. Can I prevent LR from applying the Adobe Standard Style and apply no style?
3. Can I cause LR to apply the Style as set in the camera for the particular image to be appied automatically upon import?
View 3 Replies
View Related
Jun 19, 2009
merged layer results to a slight different color compare to its original unmerged layers. the result is that the merged layer has more bluish, What's wrong and what's the solution?. Im using CS3.
View 9 Replies
View Related
Apr 20, 2006
hi. why is there a significant difference in color temp from working in raw/pscs and viewing the finished pictures in ex. windows diasshow. The temp. seems to be much warmer in windows. The raw converting im doing makes me unsure when viewing afterwards in windows.wich one can i rely on when going to my local printingshop.
View 3 Replies
View Related
Mar 26, 2007
I can't get it into my head the difference between Absolute color and relative color. I've been told many times, but I still can't remember. Would anyone know the difference, and any further reading?
View 5 Replies
View Related
Mar 12, 2013
I'm having issues with parts that were drawn in 2012 being a different color in 2013. It's the same color just a noticeably different shade. Not all parts have this color difference.
It only does this on certain parts so I when I have a bunch of the same parts mated together in an assembly it renders out with different shades and looks goofy.
See pic attached - All piping is Dark Grey in color - The verticals right below the top valves are a different shade - When I check both colors in the part files they are listed as Dark Grey.
View 9 Replies
View Related
Aug 9, 2008
Im running CS2 with Windows Vista, the same photograph look completely different in Photoshop than in the Bridge or any other applications. My Working Spaces is set to:
RGB: Adobe RGB 1998
CMYK: U.S. Web Coated (SWOP) v2
Gray: Gray Gamma 2.2
Spot: Dot Gain 20%
View 9 Replies
View Related
Aug 10, 2013
My photo's look dull and pasty in Photoshop and beautiful in Bridge. What is wrong with my Photoshop color?
View 7 Replies
View Related
Mar 4, 2013
I'm running CS5.5 student edition on a brand new Asus Q500A laptop running Windows 8. i7 processor and a UMA graphics card. I do not have calibration software; I'm using Calibrize for the moment and colors appear fairly true when browsing after calibration.
My problem is that overall colors in Photoshop appear more saturated than those in regular browser windows, particularly reds. I set up my computer to run the Win8 photos app and my desktop with Photoshop simultaneously and the color difference was immediately noticeable. I did a quick screen grab to show the difference; the inset photo is the one viewed in Win8's photos app, and the background is the exact same photo open in Photoshop.
This is the second install of this program. I originally installed it on a Dell Inspiron with a DuoCore processor (way out of spec, I know - that's why I upgraded!) and I seem to remember having this issue then, too. I found a way to correct it, but I don't remember how I fixed it and Photoshop is no longer on that machine so I can't look over my settings.
View 11 Replies
View Related
Sep 29, 2013
At the core of it all: "images from PSD exported as a .png, or a .jpg (commonly for me) do not show the same...contrast or fidelity my photoshop-canvas shows me..
I have been working on some stuff, and quite some time ago, I noticed that a certain piece of mine was not showing the subtle, noise-fog that I had added in PSD.Now, on-canvas everything seemed fine and I thought: "Okay, This is what I want." However, when I saved the image (as a .jpg and later as a .png as well), the fog was absent from the image, showing simply a "black" background. Sometime later I found that, when I zoomed in, the noise was actually present, it was just VERY unclear. You could only notice it, just barely, whilst zoomed in.
Now we come to present-time. I'm working on a little concept. It's in manga cell-shaded style, so the differences in color are easy to see (as shadows, for example, are not gradual. There's a clear line that separates the normal lighting from shadows)
Now, this 'character' has a black pair of pants (specific RGB- #100d11) and the color of the shadow is #060506..The thing is: in photoshop, I can clearly see the difference and it looks the way I want to have it. But when I saved the image to jpg (and to png) you can barely, if at all, see the difference. Someone who does not know there are two different colors, would not see it, and just see pure black. You can see the difference if you zoom-in, but even then it's not as 'stark' as it is on-canvas.
- Is this common / normal?- If yes, is there something to fix this, so that what I see on-screen is what I get when I export the file?
View 8 Replies
View Related
Nov 7, 2012
I am a web designer and have a problem with my Photoshop CS6. I work on both a mac and a pc (Win7), but use CS6 on both systems. My files are always worked with on both systems.
With several psd's, I noticed a color difference when I dragged layers to new psd's. Even the RGB values changed. When dragged back to the original psd, the colors change back again. This is not a constant problem. I have checked the color settings of both files and see no difference. If I place the color specified in the failing psd in a HTML-file, the color does not resemble the failing psd. In HTML, the color resembles the new psd. I think there is something wrong with some of my psd's, but cannot figure out what it could be and how to fix and prevent it.
I have a feeling it may be caused by changing between mac and pc, but surely this could not be the cause? I am, at the moment, unable to try this out myself, but will try this out later this week.
View 9 Replies
View Related
Apr 1, 2004
What are the difference between using cymk color mode
and rgb color mode.
I noticed that it seems that you can't apply some filiters when the mode is cymk(or is it cmyk)...
View 6 Replies
View Related
Sep 9, 2004
I'm using version 5.5 in Windows 2000. I am confused because all other images in other programs etc appear normal whereas in photoshop 5.5 they have a greenish tinge. I corrected this on the original image by choosing View > Preview > Uncompensated RGB. However, if I try colour adjustment etc e.g. variations, all the preview images still have the green tinge. Does anyone know how to correct this?
Also Uncompensated RGB is supposed to be the default view, but when I close PS the setting is lost and on opening, all images including the original are back to green. What am I missing? I have other versions 5.5 and CS on other pcs with no problems.
View 2 Replies
View Related
Nov 25, 2008
I made an image using CMYK (for printing later on), and the color is fine when I try to print it onto printing paper by just selecting the Print button on PS. However, when I saved the image as a .JPEG, the color changes drastically.
View 2 Replies
View Related
May 3, 2007
I learned from Scott Kelby's book on a technique to remove color cast.
What is the difference between color cast and correcting white balance?
View 3 Replies
View Related
Jan 10, 2012
When I edit an image in Lightroom and then continue editing it in photoshop I see a major color difference.That also happens when I export an image from lightroom as a .jpg and then upload it to the web,colors look the same as in photoshop.Color space is set to sRGB in both PS and my monitor. [URL]
View 10 Replies
View Related
Oct 7, 2012
After exporting a processed image from lightroom to jpg (sRGB) the image color looks different in the imageviewer.
The first obvious question would be: am I using a calibrated screen?
I do my regular calibration profile with x-rite i1Display2. This profile is set to default for the Win7.
The image viewer is IrfanView with color management enabled, and the same profile set.
The image in IrfanView is more colourful. So the precisely set colours in Lightroom now shows slight over saturation in the viewer.
View 1 Replies
View Related
Jul 9, 2013
I get a slight difference in color in my prints my when I use LR prifile vs Canon printer managed. The Canon is much truer to what I see on both monitors which, btw, are calibrated. LR throws in a slight magenta cast. Is there a way to correct this?
View 8 Replies
View Related
Jun 3, 2012
I have 8 gig of ram and a nvidia NX8600Gt vid card - never had problems in CS5.5 and expected CS6 to be better, but it is not.
View 1 Replies
View Related
Jan 4, 2005
i have pictures due on the 7th this month. The only thing that bothers me in my picture is that I have a slight shadow out of my face (on my right). I have never used Ohotoshop so I dont know how to remove it. I have photoshop 7. I am attaching my pic and I would GREATLY appreciate if someone could list the steps i need to do to fix the picture. My girlfriend's picture is the same .. so Ill need to know the steps
Also if I could maybe lighten up the background ...
View 3 Replies
View Related
Nov 1, 2012
Document colors in Corel Draw X3 have changed. Example: dark green is now black on my designed object; Teal is now light green.
I thought it might be color management had switched somehow but all management settings do not make a change as they did before or at all. Basically I think the problem lies in the color management. I re-installed the program but the problem remains. Color management does not affect color appearances as they used too before.I run windows 7 and have had it for a couple of years with no problems.
View 1 Replies
View Related
Nov 15, 2013
I have tried a number of different methods however I cannot seem to get rid of this problem. Every time I put together banners or any graphics/designs for that matter, whenever I save them and then display them I always end up with a slight blur. I am trying to get a really crisp finish but can never seem to get it right, please see attached photos .
View 3 Replies
View Related
Apr 15, 2005
I'm trying to save the image in Photoshop under Save for Web. However, the optimised images always have a slightly yellowish tint.
View 2 Replies
View Related
May 6, 2012
I had about twenty seconds to take this picture last night but only to notice it is rather dark due to the limited lighting in that area. I have tried various settings in Lightroom to brighten it up enough to see the moon and the building in the foreground but the pictures just come out to grainy and a slight purple look. what i can do for this?
View 5 Replies
View Related
Jul 12, 2004
If u have ever seen those spray painted galls , plz post a tutorial on how to do that. I mean any mag out there has some form of softening or spray painting going on, especially womens health mags... Are there tools u have to buy? Im more interested in finding out how to do it from scratch.
View 9 Replies
View Related
Jul 25, 2013
Today i've noticed that when i copy/paste a timeline from Premiere CC to AE CS6 unfortunately nothing happens. So i can't dynamic link or copy/paste footage in AE CS6. I can only use AE CC. Usually i make my edit in Premiere and then i use the same timeline in AE to do postproduction. If i uninstall AE CC can i be able to copy/paste my timeline in AE CS6 from Premiere CC?
I can't install Premiere CS6 because i use an MXO2 card.I can run AE,Photoshop and Encore CS6 with CC apps on the same machine,but not Premiere CC and Premiere CS6 at the same time.
View 2 Replies
View Related
Nov 16, 2012
In Graphics Editing software like Photoshop you can rotate an image ever so slightly to the left or to the right. I'm trying to super-impose a png of a head onto something and I would like to match the angle of the original head.
View 4 Replies
View Related
Jan 5, 2012
I have an HV 40 and take the video off with Hd Split.I put 30 minutes of video in the time line and then want to break it up to 8 -9 minute segments. I tried using the scissors to cut each segment and then delete what I don't want and share - output - mpg optimizer. That gave me five files. The first one is fantastic, what you would expect. The rest all have a jump or stutter at the beginning. Just for one second of play, the rest is great.
So I thought I must be doing something wrong, and then started over with multi-trim. I cut the five segments out using that and the same thing. I thought I would live with it. So then I converted all the clips to MP4 HD. Just to reduce file size and make easier to upload. Now the thing I was going to live with looks twice as bad. It went from being almost unnoticeable to a major glitch. Rest of video plays great and you can hardly tell any quality difference between it and the original.
So then I started playing around with cutting off the front 1.5 seconds of the clip and that seems to actually work. To get rid of it. But it is more work and I don't think professional.
Then I read something about fade ins so I tried that. I took the original first cut of the second segment and put it into the overlay track and used the little fade in slider in the preview window, to have a slight black fade into the clip. This covers up the jitter but the entire clip is now noticeably degraded. I mean it looks lousy!I went straight to mp4 this time, instead of making the fade and then using the optimizer to go to the same format and then convert.
So now I am a bit discouraged. I have a fast six core computer am using the latest corel x4 pro and it seems that things are not going to go very well. Simply cutting the video to make edits results in jitter at the start of each cut clip and messing with a fade in just ruins the quality. What to do?
[URL]
BTW going from the mpg to the mp4 reduces the size by about half which makes up load reasonable, but still an all night affair.
View 5 Replies
View Related
Sep 24, 2013
I'm tryin to create an an elliptical wall. 6" Thick.It needs to go from 48" at one end and lower to 36" as it sweeps around the ellipse. (It's only an arc of the ellipse and not completely closed).
View 4 Replies
View Related
Apr 8, 2013
is there any way to align a extrude solid object as per angle reference line?
View 5 Replies
View Related
Dec 14, 2012
I built 3 profiles with ColorMunki for three different papers (I print with an Epson 3880). Using each of the profiles, a slight bluish tinge appears in what I'll call the "margin" of the prints. My tests were done on 4x6 paper, but the image was only about 5" wide--so there's a 1/2 inch "margin" between the edge of the image and the edge of the paper. The bluish tinge shows up here, but doesn't extend into the white border of the print. The weird part: the bluish tinge appears ONLY using the profiles. If I choose "Managed by Printer" everything is fine. No bluish tinge.
This could be related to LR 4.3, which I downloaded just before making and installing the profiles.
View 2 Replies
View Related
