Photoshop :: Resolution Render By Printer
Feb 21, 2008
If you uncheck the resample box when enlarging an image you maintain the number of pixels in the image, lowering the image resolution. But, according to Tim Grey:
From www.tim@timgrey.com 2/20/2008 QUOTE"...the image will be interpolated at the printing stage (for example, most photo inkjet printers render the data at 360 ppi)".END OF QUOTE
Thus, if you don't resample (interpolate) in Photoshop, the printer will do so for you. I am having a hard time accepting this Tim Grey advisory. Do "most" ink jets really render at a fixed resolution (300, 360, whatever), or do they render at the resolution specified by the user?
View 24 Replies
ADVERTISEMENT
Mar 16, 2013
I am designing a Flyer, (PDF) in Photoshop and that will not be going for printing company but printed in a University in UK. What DPI / PPI? Normally for web i use 72 and for Printing company i use 300. But for home printing, i don't know.
Secondly, what about color. Will CMYK be good for home printing. I don't know exactly what printer it is going to be.
View 6 Replies
View Related
May 22, 2012
Running under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
Â
In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
Â
I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
Â
In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
Â
We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
Â
I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
Â
I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
View 2 Replies
View Related
Jan 31, 2014
I am rendering projects to print them in large format pages, but the printed images the edges are not so sharp, so I tried to rise the render quality, but the final result is always in 72. How can I give a higher quality in order to print those images in large format.
View 1 Replies
View Related
Oct 28, 2013
I need a render with good Quality, so i define the " standard render" on "presentation", and "render quality" on "5", and image size on 2500*2500, BUT the image Weight gets so low, like 500KB..
How can it be? How can i increase the quality?
View 8 Replies
View Related
May 2, 2013
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies
View Related
Mar 17, 2013
I realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies
View Related
Aug 25, 2007
I am a Photoshop newbie and I have a series of graphics (all 72dpi from a website) that I would like to print in 300dpi. Is it possible to take a 72dpi .jpeg or .gif file and easily convert it to a higher resolution printable graphic? If Photoshop can't do it, is there any type of program that can?
View 1 Replies
View Related
Mar 6, 2013
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies
View Related
Oct 23, 2004
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
View 5 Replies
View Related
Aug 1, 2012
I keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies
View Related
Nov 17, 2012
I'm trying to create a high resolution version of a low resolution texture used in a game. I've found a pattern that I think is acceptable, from a real image.Now the question is this: how can I colorize the large image to that it is as resemblant as possible to the original one? I've tryed a simple colorize, but the result is not so good...
Original texture:
[URL]
The image to be colorized:
[URL]
View 2 Replies
View Related
Apr 13, 2011
The same scene, same settings, produce 2 very different outputs in max 2011 and 2012, render to texture for normals is currently useless in max 2012.
The blue one is a correct tangent normal map created from a sphere in max 2011, the colored one is the the one created inside max 2012 from the same objects and settings, and the last is another sample of normals generated in max 2012.
View 9 Replies
View Related
Apr 19, 2012
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies
View Related
Aug 19, 2013
Each time I want to have batch render with 4 camera views. I thought it would provide me with elements along with it. But it just brings me only one file as I set .png.
Â
I know it works with State Set by changing camera view. But Batch render should work too.
View 1 Replies
View Related
Dec 28, 2013
I can´t believe it. Save 50% Rendertime. Fix the Render Elements Bug with Render Optimizer V3! deactivate "contrast all Buffers" with RO V3, and you have the same speed as Vray Renderelements.2014 can comming! URL....
View 3 Replies
View Related
Jun 3, 2011
Okey, so I want to render a normal map directly from render production. Pretty much like the Viewport Filter "Normal map" in Mudbox. Can this be done? And I also want to make clear that I do not want to use "render to texture". I dont want to do any projection against an other mesh, I want to do it directly to the camera.
View 2 Replies
View Related
Jan 17, 2014
Yesterday Ae was working perfectly. Today, Ae will not render compositions in the render queue or in AME? If I try to render from Ae,I get this error message:
Â
and I can fin nothing about this error anywhere on line.
View 3 Replies
View Related
Apr 17, 2012
Is it possible to render an object to fit exactly into the render window. i.e If I have a plane object segmented into 512 * 512 segments and I randomly colour each polygon. If I render at 512*512 pixels, I would like to fit the plane exactly so that the rendered image shows 1 pixel per polygon.
Whilst you can select region to render its not that exact and is based on the visual window. can it be utilized with render blowup.
Basically I want to render a square object exactly ( no borders) at a large resolution, hence the need for render blowup so that I can render into smaller tiles.
View 2 Replies
View Related
May 8, 2009
I tried an HP Office Jet All in One and it refuses communication with Photoshop. Even Adobe help couldn't change that. When I had to switch to an LCD, the printer just couldn't reproduce the intensity of what I was creating on screen. I'd welcome opinions and experiences with brands that work well with the strong LCD screen images (-I'd LOVE a WYSIWYG ) and one that is Vista compatible. I've looked at Epson, Canon and HP and have worries about all of them which have to be resolved SOON. Majority of my work is with photos of all sizes to 13X19"
View 18 Replies
View Related
May 7, 2012
I have run CS3 for many years on many platforms with two different printers. I upgraded my computer and operating system (basic specs listed below) in January of this year, 2012, and I decided to pare down to one printer: my Epson Stylus Photo R2880, which has been working with it splendidly until this past Friday, 5/4/12. I suddenly started getting the not responding issue when I attempted to open files in not just Photoshop, but my Acrobat as well. I have not updated any drivers in the month of May and I could still use all of my non-adobe software just fine. I looked online and found that it was a known issue. I reset my preferences, I ran a windows de fragment, I swept for spyware, and none of those worked. I set adobe pdf as the default printer for my computer and the "issue was resolved."
The problem remains that when I go into my print dialogue and manually change the target printer to my Epson I cannot print out of any of my Adobe software the not responding issue reasserts itself if any adobe software attempts to communicate with my printer: word, text files, windows viewer and the internet still print just fine off of the Epson. This is a huge problem for me because I run a small home publishing company and I can no longer PRINT out of my work software. Extremely frustrated that this 'fix' is no fix at all for my needs. I am at an utter loss for what to do to have a working office again and would like getting software that has been working perfectly in multiple set ups with multiple printers for since 2009 to work again?
Â
I used to run CS3 on a custom built XP SP3 system with an hp printer, then with and hp and Epson printer. This year I switched to my current system, wiping the old drive as a backup disk and adding a 1T hard drive to hold win 7. It has worked fine for several months of heavy use for my website, greeting cards, and small comic publications. I need this set up to work again or I will go out of business,
Windows 7 Professional service pack 1
Intel Core 1.7-2600K CPU @ 3.4Ghz/3/7Ghz
16 GB memory
64 bit
Pen Input Activated (wacom intuos 3)
"Windows Experience Index" rating claims it's '5.9' - whatever that means
Nvidia GeForce GTx560 graphics card
Basic mother board sound handling
Â
Logitech wireless keyboard and mouse
Epson printer
Mustek A3 scanner
View 5 Replies
View Related
Sep 3, 2013
All of a sudden, when I try to print from Photoshop CS6, I get a message that says my printer is not online. If I load the photo to another program I have no problem printing.Â
My grandson was using my Photoshop and may have changed some setting, but which settings!
View 1 Replies
View Related
Feb 22, 2013
PRODUCT: ps cs5
printer: epson profession v500 photo scanner.
VERSION: 12.0
os: mac os 10.8.2 (64 bit)
Â
Printer not getting detected:
Â
Solution: run Photoshop CS5 in 32-bit mode:
1. Quit Photoshop CS5.
2. Navigate to Applications/Adobe Photoshop CS5 folder.
3. Select the Adobe Photoshop CS5 application file.
4. Choose File > Get Info.
5. Select "Open in 32-Bit Mode".
6. Close the Get Info dialog box.
7. Restart Photoshop CS5
View 1 Replies
View Related
Feb 20, 2012
Any new Photoshop documents printed to the new printer comes out in characters instead of the image. We are using an Intel based Mac book running 10.5.8 Leopard and have done all the updates to the computer as well as the firmware update to the printer. The printer shows that is a postscript printer.
View 6 Replies
View Related
Feb 12, 2004
I have recently started using a printer profile (Epson photo 1270). My query is this. I take a picture with my camera (Canon 10D), which when viewed on my monitor in ACDsee looks about right, colors ok, just needs a few touches here and there maybe. I then open it in Photoshop using the printer profile and the pictures looks very different. Now I realise what is happening but I am having great trouble adjusting the picture back to how it looked originally(which I was fairly happy with). I also know that if I can adjust the picture to how it looked it will print out almost identical to how it looks on the screen, so that is ok. It just takes a lot of time to do this using the Photoshop tools, and it is so hit and miss to try and put it right and get back to the original colors etc. Is there a shortcut that can be used, using the color values from the original view before it was opened in Photoshop or something like that? It just seems a lot of work for every individual photograph I may want to print out. I can compare the two views of the same photograph by having Photoshop and ACDsee open together.
View 1 Replies
View Related
Mar 14, 2006
I find that working with a picture I get different colors etc. from my printer (Cannon MP 800) than what I wanted from what I am working with on my monitor. I know monitors and printers see and show different colors etc.
View 2 Replies
View Related
Jul 1, 2009
I have tried reinstalling the printer driver, making sure it's the default, testing the printer using it's own software test, tried the Duplicate layer suggestion and none of them work. I need this printer to work pronto so I'll try Lightroom.
View 4 Replies
View Related
Jun 24, 2008
I am running under XP SP3 with Photoshop CS3 version 10.0.1 with an Epson R2400. All of the profiles are present in windows/system32/spool/drivers/color, but are not listed in Photoshop's printer profile list. Everything was working fine as recently as 3-4 weeks ago, and everything is still working fine in CS2 which is also installed on this machine (3.7gig processor with 1gig ram) and several large hard drives).
I noticed the problem after installing SP3 today, but the problem remained after I restored a Ghost image created just prior to the SP3 update. Thus, it seems not to be caused by SP3. I have reinstalled SP3 based on that conclusion.
The only items on the printer profile list look like things that ship with Photoshop such as Apple RGB.
View 4 Replies
View Related
May 26, 2009
I am getting the following dialoge box when trying to print in PSCS4 to my Epson 3800, Vista 64. This is a new problem. "Before you can perform printer-related tasks such a s page setup or printing a document, you need to install a printer." I have installed and reinstalled the Epson twice now, I have tried printing to PDF as well as the generic Windows printer driver. PS is updated. I can print from Illustrator and Acrobat, as well as Office, ect. The problem is only PS. I have Vista 64 and PS 64 on a laptop and I can print to the Epson just fine. What is going on with my tower? update: even more curious is that I can create a new document and PS DOES see the printer just fine.
View 15 Replies
View Related
Feb 28, 2006
Were need to invest in an archival printer. We need to be able to print archival prints and also strip prints. Example size would be 10X30. Nothing over an 11X14 size on standard sizes. So any recommendations? I was looking at the Epson r2400 but wasn’t to sure on just how long of a print it can print.
View 4 Replies
View Related
May 16, 2008
Is there a way in PS to permanently attach a bleed and cut marks to a psd or tiff image? I've found how to do this via the print dialog box but it doesn't appear to save the info back to the master file.
View 1 Replies
View Related
