Photoshop :: Refuses To See Any Printer
May 26, 2009
I am getting the following dialoge box when trying to print in PSCS4 to my Epson 3800, Vista 64. This is a new problem. "Before you can perform printer-related tasks such a s page setup or printing a document, you need to install a printer." I have installed and reinstalled the Epson twice now, I have tried printing to PDF as well as the generic Windows printer driver. PS is updated. I can print from Illustrator and Acrobat, as well as Office, ect. The problem is only PS. I have Vista 64 and PS 64 on a laptop and I can print to the Epson just fine. What is going on with my tower? update: even more curious is that I can create a new document and PS DOES see the printer just fine.
View 15 Replies
ADVERTISEMENT
Jan 4, 2014
I installed and have successfully used PSE 12 on Windows 7 since October 2013. It quit working in the middle of alternately using it with an online screen of an art class and now refuses to launch. I have done repeated uninstalls and reinstalls to no avail. It's welcome screen does come up but now with the message that my trial version has expired and the only option given is to BUY NOW. I have a licensed product. Is this a program bug as I've read others encountering similar issues.Â
View 1 Replies
View Related
Jul 11, 2012
Recently I installed an update to Corel X6 after I had updated CS6 of Photoshop. Now despite choosing Photoshop as the default application, jpgs open in Acrobat.
Â
Just choosing Photoshop as the default application doesn't change anything. They still open in Acrobat unless I first start Photoshop and open the file I want.
View 27 Replies
View Related
Jul 1, 2013
I have three printers installed on this Windows Vista 64-bit machine, and they all operate normally with other applications. When I open a TIF or JPEG file in Photoshop, part of the time they open normally, and I can do print preparation and normal printing. Sometimes when I open a TIF or JPEG file, they open normally, but when I start to prepare them for printing (printer selection, etc.), a Photoshop CS4 message tells me that I have to install a printer first before I can do any printing-related tasks. It acts like there are no installed printers at all. Obviously I am not changing my printer hardware status between files that work and files that don't work.
Â
I've been trying to compare the files that work normally with the files that don't work normally, and I haven't found the trend yet. If I try to recreate thousands of files that don't work normally so that they do print, that will be a monumental job.
View 4 Replies
View Related
Aug 17, 2005
Anyways; select LINE TOOL, options above are:
Fill Pixels
Line Tool
Weight : 1px
Mode : Normal
Opacity : 100%
Anti-Aliased : No check
Brush Color : Pink
Click on the canvas, hold SHIFT to force a straight line, move towards the bottom of the document, let go of the mouse button, it draws a line straight to my mouse's cursor! I have no other ideas what is causing this.
View 8 Replies
View Related
May 2, 2013
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies
View Related
Jul 14, 2013
My program refuses to start and reports failure 150:30 - get support from adobe
View 1 Replies
View Related
Dec 17, 2013
How can I get nef files from my nikon d800 loaded into the DNG program?
View 9 Replies
View Related
Mar 6, 2013
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies
View Related
Apr 5, 2011
I recently jumped from C-12 to X5, and now I simply can not work properly.
After creating an image and converting it to a bitmap, if it is converted to RGB I get the "failed to launch server application" error, while in CMYK everything works fine.
View 6 Replies
View Related
Dec 2, 2013
I have Revit 2014 installed on my work PC and am working on a 70mB file of no exceptional complexity on Revit Server. I am running with SP1 & SP2 installed on
Â
During work, Revit just freezes dead!. I cannot do anything. I cant escape, I cant unfreeze it. Its as if its waiting for me to respond to a message but there is no **** message!
Â
When I control Alt Del and try to force shut Revit - Windows tells me Revit is waitng for me to respond. Revit itself throws up a useless message saying I have an uncompleted operation.
View 1 Replies
View Related
Aug 30, 2011
I am having a strange issue with 1 of my drawings, it simply refuses to export to *.dgn. it wont give any error message what so ever, just when i go to file -> export -> put in the standard option and hit export nothing happens and returns to the drawing no dgn file is created.
I've tried older drawings of mine and those still work fine and export command does its job.
View 1 Replies
View Related
Feb 28, 2013
I have to continually update the views for all of my parts regardless of how many times I change my settings and save. I recently updated to 2013 FDS. I've changed the default template but still no go. The views continually revert back to some default that looks horrible. At times the backgroud display will remain but eventually reverts back to some default. I've updated the document settings, application settings, and template settings but still get the same thing.
View 7 Replies
View Related
Sep 22, 2013
Gimp refuses to open after closing all projects and reopening gimp! it always freezes INSTANTLY on the start-up screen! it doesn't matter how many times I force close Gimp and restart Gimp! it always freezes 1 second after opening!
View 3 Replies
View Related
Aug 4, 2011
I just noticed that Smoke wont use the home directory for the project (to save setups) instead it goes to another location on the hard disk. Is this a bug or a configuration problem?
Smoke 2013 Ext1
17" Mac Book Pro
OS X 10.8.5
16 GB RAM
View 2 Replies
View Related
Dec 30, 2011
Trying (in vain) to get the background of this picture transparent...Its white right now and i tried alphamask the whole picture looked like it had seen a ghost but it still wasn't transparent the magic wand refuses to do so either perhaps i'm doing something wrong?
View 3 Replies
View Related
Apr 30, 2011
I have used on and off MovieFactory for a number of years and have been well pleased. It's simple to use and doesn't require a degree in software use to make effective DVD's playable in all DVD players.I shoot my footage with a Panasonic NV-MX300 3 CCD camcorder, which although a few years old now, can hold it's own with lower end so called HD Camcorders
My method of creating a DVD has been to capture the footage using a third-party Video editor and then importing it's export into Movie Factory and then work from there.
I have recently upgraded my version of MovieFactory 6 Plus to VideoStudio Pro X4 as this seems to better support the creation of HD BluRay discs. No I don't have the Power Pack Plug-in with my version of MovieFactory but thought that upgrading would better suit my needs.I have created, successfully a 35Gb .AVI file using my third-party NLE and it's properties are as follows: -
Stream 0
Type: Video
Codec: DV Video (dvsd)
Resolution: 720x576
Frame rate: 25
Stream 1
Type: Audio
Codec: PCM S16 LE (araw)
Channels: Stereo
Sample rate: 48000 Hz
Bits per sample: 16
My original DV footage was roughly this too. It was shot in Widescreen although the sound was recorded in 32000 Hz stereo. When I import the video into either MF 6 or VS Pro 4 the playback is in a squashed 4:3 aspect Ratio and no matter how I alter the preferences or Project Settings, before or after importing the .AVI file, it refuses to play back in widescreen.When the exported file plays in VLC Player or Windows Media Player, it plays back correctly.
View 14 Replies
View Related
Oct 21, 2013
I am using Autocad 2D for a drawing, and my lineweight refuses to plot correctly. I didn't use a ctb file, but I changed them by hand each one. Most of them works correctly but some of them not. When I go to the properties window, every of them have the good lineweight, it's when I plot them in pdf file and open them in Adobe reader, some still have the 0mm (wrong lineweight). However they show they are the good size in properties window, but they plot differently.
I just realize that when it shows in adobe reader it shows the wrong lineweight, but if I convert the pdf into a jpeg and open it with windows photo viewer, it shows the correct lineweight.
View 6 Replies
View Related
Aug 23, 2013
I have a model in which we want to make lighter than the prototype turned out to be. In order to acomplish this i am removing a chunk of the metal in the lid(images attatched. I have completed the sketch seen in red and extruded it to prove that the loop is complete but when I try to reverse the extrusioni to cut from the lid dragging down the arrow as an example, it turns the effected area a darker red than normaly seen when you cut something. When I let go of the left mouse button it pops back up to the original surface having no effect and refuses to go benieth it and when I apply I get the error seen at the bottom of the attatched image. I do this sort of cutting often instead of digging down to the root sketch then dealing with the ripple effect of the changes we want to make.
View 4 Replies
View Related
Jul 17, 2013
I have been building a bush cross section.I am building it as a dynamic block as I need copies in many different sizes.
Due to the cross section I am using hatches to indicate different materials (only 2)
When I change some distances linked to actions the hatch remains inside its boundary and conforms to the new shape, most of the grips work perfectly whereas one, the top left grip, misbehaves time after time and breaks the hatch associativity.
I should mention that I had it working perfectly earlier, but was asked to add a fillet onto my drawing and after putting this in and tweaking everything I have no longer been able to reach perfection.
View 5 Replies
View Related
Oct 15, 2013
I am having quite a frustrating issue when trying to simply shift + drag in edge mode. I click the edge and hold shift to drag it and it instantly becomes deselected when clicking the the gizmo to move up.
View 5 Replies
View Related
Jan 19, 2011
I wanted to edit the table, by adding a row, but it refuses to make any changes.
So, I went ahead and made a new table, but now I cannot delete the old one, nor move it anywhere.
I checked all of the cells and the table in general, but none of it is locked.
View 6 Replies
View Related
Mar 20, 2008
I was working on a few images for an newsletter for a dutch company and saved those files in 2 PSD's , both of them were around 500Kb in size, but i can't open them anymore since a few days.
Everytime i try to open them Photoshop gives me the error that i don't have enough RAM, after 2-3 tries photoshop crashes, giving me a mesage that "photoshop had to exit because bla bla" ( the typical crash error )
Now comes the strange thing, i can open them when using bridge, but that isn't the option for me as i don't like bridge.
View 17 Replies
View Related
May 8, 2009
I tried an HP Office Jet All in One and it refuses communication with Photoshop. Even Adobe help couldn't change that. When I had to switch to an LCD, the printer just couldn't reproduce the intensity of what I was creating on screen. I'd welcome opinions and experiences with brands that work well with the strong LCD screen images (-I'd LOVE a WYSIWYG ) and one that is Vista compatible. I've looked at Epson, Canon and HP and have worries about all of them which have to be resolved SOON. Majority of my work is with photos of all sizes to 13X19"
View 18 Replies
View Related
May 7, 2012
I have run CS3 for many years on many platforms with two different printers. I upgraded my computer and operating system (basic specs listed below) in January of this year, 2012, and I decided to pare down to one printer: my Epson Stylus Photo R2880, which has been working with it splendidly until this past Friday, 5/4/12. I suddenly started getting the not responding issue when I attempted to open files in not just Photoshop, but my Acrobat as well. I have not updated any drivers in the month of May and I could still use all of my non-adobe software just fine. I looked online and found that it was a known issue. I reset my preferences, I ran a windows de fragment, I swept for spyware, and none of those worked. I set adobe pdf as the default printer for my computer and the "issue was resolved."
The problem remains that when I go into my print dialogue and manually change the target printer to my Epson I cannot print out of any of my Adobe software the not responding issue reasserts itself if any adobe software attempts to communicate with my printer: word, text files, windows viewer and the internet still print just fine off of the Epson. This is a huge problem for me because I run a small home publishing company and I can no longer PRINT out of my work software. Extremely frustrated that this 'fix' is no fix at all for my needs. I am at an utter loss for what to do to have a working office again and would like getting software that has been working perfectly in multiple set ups with multiple printers for since 2009 to work again?
Â
I used to run CS3 on a custom built XP SP3 system with an hp printer, then with and hp and Epson printer. This year I switched to my current system, wiping the old drive as a backup disk and adding a 1T hard drive to hold win 7. It has worked fine for several months of heavy use for my website, greeting cards, and small comic publications. I need this set up to work again or I will go out of business,
Windows 7 Professional service pack 1
Intel Core 1.7-2600K CPU @ 3.4Ghz/3/7Ghz
16 GB memory
64 bit
Pen Input Activated (wacom intuos 3)
"Windows Experience Index" rating claims it's '5.9' - whatever that means
Nvidia GeForce GTx560 graphics card
Basic mother board sound handling
Â
Logitech wireless keyboard and mouse
Epson printer
Mustek A3 scanner
View 5 Replies
View Related
Sep 3, 2013
All of a sudden, when I try to print from Photoshop CS6, I get a message that says my printer is not online. If I load the photo to another program I have no problem printing.Â
My grandson was using my Photoshop and may have changed some setting, but which settings!
View 1 Replies
View Related
Feb 22, 2013
PRODUCT: ps cs5
printer: epson profession v500 photo scanner.
VERSION: 12.0
os: mac os 10.8.2 (64 bit)
Â
Printer not getting detected:
Â
Solution: run Photoshop CS5 in 32-bit mode:
1. Quit Photoshop CS5.
2. Navigate to Applications/Adobe Photoshop CS5 folder.
3. Select the Adobe Photoshop CS5 application file.
4. Choose File > Get Info.
5. Select "Open in 32-Bit Mode".
6. Close the Get Info dialog box.
7. Restart Photoshop CS5
View 1 Replies
View Related
Feb 20, 2012
Any new Photoshop documents printed to the new printer comes out in characters instead of the image. We are using an Intel based Mac book running 10.5.8 Leopard and have done all the updates to the computer as well as the firmware update to the printer. The printer shows that is a postscript printer.
View 6 Replies
View Related
Feb 12, 2004
I have recently started using a printer profile (Epson photo 1270). My query is this. I take a picture with my camera (Canon 10D), which when viewed on my monitor in ACDsee looks about right, colors ok, just needs a few touches here and there maybe. I then open it in Photoshop using the printer profile and the pictures looks very different. Now I realise what is happening but I am having great trouble adjusting the picture back to how it looked originally(which I was fairly happy with). I also know that if I can adjust the picture to how it looked it will print out almost identical to how it looks on the screen, so that is ok. It just takes a lot of time to do this using the Photoshop tools, and it is so hit and miss to try and put it right and get back to the original colors etc. Is there a shortcut that can be used, using the color values from the original view before it was opened in Photoshop or something like that? It just seems a lot of work for every individual photograph I may want to print out. I can compare the two views of the same photograph by having Photoshop and ACDsee open together.
View 1 Replies
View Related
Mar 14, 2006
I find that working with a picture I get different colors etc. from my printer (Cannon MP 800) than what I wanted from what I am working with on my monitor. I know monitors and printers see and show different colors etc.
View 2 Replies
View Related
Jul 1, 2009
I have tried reinstalling the printer driver, making sure it's the default, testing the printer using it's own software test, tried the Duplicate layer suggestion and none of them work. I need this printer to work pronto so I'll try Lightroom.
View 4 Replies
View Related
