I installed and have successfully used PSE 12 on Windows 7 since October 2013. It quit working in the middle of alternately using it with an online screen of an art class and now refuses to launch. I have done repeated uninstalls and reinstalls to no avail. It's welcome screen does come up but now with the message that my trial version has expired and the only option given is to BUY NOW. I have a licensed product. Is this a program bug as I've read others encountering similar issues.Â
On start up of the program where it gives you the option to organize or edit, edit usually launches the editor and I can work in it. It brings up the load bar but then just goes away and I'm still at the same start up. Nothing has changed on my computer that I know of, I'm the only user.
Up until two days ago, my Photoshop Elements 11 installation worked just as I expected. Since then, when I launch, it goes through its startup, displays the editor interface and then quits. The only error message I get is from Windows (version 7) informing me that the program has stopped working
Runing windows 8.1 on ACER Aspire 8920 4GB of RAM. Download and installation ran to completion without problem. But double clicking shortcut on desktop does not launch PSE12. It quits trying very quickly. I was running PSE 11 without problem. I was able to start PSE 12 by going to the Program folder. It told me that the Online services are not available. I continued and I had difficulties converting the catalog. I wasn't able to launch the Editor from the Organiser. I decided to try again from scratch by downloading the software with the downloader assistant. All went well, but the Launching.
In Photoshop Elements 8.0 I attempted to order photo prints through Shutterfly. The transfer never completed. Now when I open Photoshop Elements and click on Organize, the Organizer never launches. I would like to retrieve all the folders of photos I have organized, captioned, made into CDs, etc. with Photoshop, but I cannot get the Organizer to open.
I was able to successfully download and install the trial version of PS Elements 11 on 64 bit Windows 7. However, trying to open the program doesn't result in any error, it just won't launch. Even after rebooting I am not able to launch the program. My PS Elements 8 is still working fine.
I get this error message every time I startup the Editor. I have tried uninstalling and reinstalling the software. The same problem exits. I have tried the Control+alt+Shift when the Editor is starting up and that does not work either.  I am running this on a Windows 7 machine. I am trying to launch the Editor from the welcome screen. The editor comes up and I can see the workspace but then the error message comes up. I get the same error message when I try to launch the Editor from the Organizer.  The error message states: "A problem caused the program to stop working correctly. Windows will close the program and notify you if the solution is available"  I have LR 4 loaded on my machine and do most of my editing there. I tried to open the Editor to create a blank canvas and got this error message. I also get the error message when trying to open a photo in the editor directly from lightroom.  When I attempt to run updates for PSE 11 I get the following error message: "The update server is not responding. The server might be offline temporarily, or hte internet or firewall settings may be incorrect. Please try again alter. Error Code: u41m1c212
Organizer has stopped working for me. When I try to launch it, the "credits" screen flashes briefly, but then nothing is displayed. If I try an option, like "Get Photos and Videos," then nothing happens, and all the options become grayed out. I just upgraded from PSE 10 to 11, and I created a new catalog. The organizer was working fine last night, but not today.
I have PSE11 set as the default program to open .jpegs, for instance......so, if I double-click a picture icon it will launch PSE11, but it's always in "Quick" mode initially......is there a way to configure it so that it launches in Expert mode each time?
I've just bought Element 11 in the AppStore and after the launch I get:
Process:Â Â Â Â Adobe Photoshop Elements 11 Editor [6249]Path:Â Â Â Â Â Â Â /Applications/Adobe Photoshop Elements 11
Editor.app/Contents/MacOS/Adobe Photoshop Elements 11 EditorIdentifier:Â [url]Â Â Â Â 11.0 (11)App Item ID: 571583293App External ID: 11641628
Code Type:Â Â X86 (Native)Parent Process:Â launchd [622] User ID:Â Â Â Â 501Â
Date/Time:Â Â 2013-08-17 20:55:40.370 +0200OS Version:Â Mac OS X 10.8.4 (12E55)Report Version:Â 10[code]...... Â I tryed to remove and reinstall application but with the same result.
When I click in the shortcut (now covered with a shield icon) the programme starts, fails to fully boot and dissapears. Subsequent efforts to start then do not even try to boot.
I've been trying to get Adobe Photoshop Elements software to work on my computer since mid December. I've had alot of responses to different options, even from Adobe themselves, and nothing is working. I get the Welcome Menu screen but when I click on either Organizer or Edit nothing happens. I am the administrator on my home computer and tried launching as administrator but nothing works. I've tried launching it from "Program File" exe but nothing. When I do this I get this error message;
"Windows cannot find 'C:Program Files (x86)AdobePhotoshop Elements12PhotoshopElementsEditor.exe'. Make sure you typed the name correctly, and then try again."
I've tried a Install Photoshop Elements in a simplified mode, nothing.  I've shut down my firewall and virus program and then install, nothing. Looks like I've stooped everyone. Now I can't even return it because the package is open.
My computer is a 64-bit Operating System, Intel (R) Core i7 CPU, 869 @ 2.80GHz, Windows 7 Professional.
When I put a jump drive into my USB port Adobe Photo Shop Album Starter Edition 3.2 launches. It won't go away. I can't see what is on my jump drive. I can only see pictures. It's got to be something on my computer because the jump drives I've tried work perfectly on other computers. I tried a blank drive and it did the same thing.
Purchased from Adobe via internet. Akamai interface downloaded and then Photoshop Elements 11. Both icons on Mac desktop. Double clicking on PE 11 does not launch program. Is it fully downloaded? I get Read Me file in four languages as well as a PE 11 icon after double clicking the desktop icon.
I finally can get Organizer to run by using the new short cut I created but Editor refuses to display anything other than a small gray box on the upper right side of my desktop and a border that is missing a substantial amount of pieces!Â
I took several pictures, seven to be exact of a rocket launch at night, thinking that one long exposure might make some sections of the photo too bright. The beach is a little underexposed, but that is OK. how to join them? I thought I would use the first one as the base and basically merge the others after I take out all of the content except the rocket plume/flare, but when I try this, it puts the rocket plume in the middle of the layer and I would have to manually align the rocket trail, but can't seem to do it very easily. I'm only trying to cut and paste, and obvious newbie to elements. I have just upgraded to 12 but still have 9 on my machine if one is any better than the other for doing this type of thing.
Just installed CS5.1 a couple of weeks ago. Runs no problem in 64 bit. But 32 bit is a different story..In Mac, Get info, and set CS5 to open in 32 bit, CS5 launches an instantly freezes with the spinning beach ball.I can't do anything expect force quit.Mac Pro, 8 core, 10 GB ram, OS 10.5x  I need to be able to run in 32 bit for plug-ins that are not 64 bit.
I am getting the following dialoge box when trying to print in PSCS4 to my Epson 3800, Vista 64. This is a new problem. "Before you can perform printer-related tasks such a s page setup or printing a document, you need to install a printer." I have installed and reinstalled the Epson twice now, I have tried printing to PDF as well as the generic Windows printer driver. PS is updated. I can print from Illustrator and Acrobat, as well as Office, ect. The problem is only PS. I have Vista 64 and PS 64 on a laptop and I can print to the Epson just fine. What is going on with my tower? update: even more curious is that I can create a new document and PS DOES see the printer just fine.
Recently I installed an update to Corel X6 after I had updated CS6 of Photoshop. Now despite choosing Photoshop as the default application, jpgs open in Acrobat. Â Just choosing Photoshop as the default application doesn't change anything. They still open in Acrobat unless I first start Photoshop and open the file I want.
I have three printers installed on this Windows Vista 64-bit machine, and they all operate normally with other applications. When I open a TIF or JPEG file in Photoshop, part of the time they open normally, and I can do print preparation and normal printing. Sometimes when I open a TIF or JPEG file, they open normally, but when I start to prepare them for printing (printer selection, etc.), a Photoshop CS4 message tells me that I have to install a printer first before I can do any printing-related tasks. It acts like there are no installed printers at all. Obviously I am not changing my printer hardware status between files that work and files that don't work. Â I've been trying to compare the files that work normally with the files that don't work normally, and I haven't found the trend yet. If I try to recreate thousands of files that don't work normally so that they do print, that will be a monumental job.
Fill Pixels Line Tool Weight : 1px Mode : Normal Opacity : 100% Anti-Aliased : No check Brush Color : Pink
Click on the canvas, hold SHIFT to force a straight line, move towards the bottom of the document, let go of the mouse button, it draws a line straight to my mouse's cursor! I have no other ideas what is causing this.
I recently jumped from C-12 to X5, and now I simply can not work properly.
After creating an image and converting it to a bitmap, if it is converted to RGB I get the "failed to launch server application" error, while in CMYK everything works fine.
I have Revit 2014 installed on my work PC and am working on a 70mB file of no exceptional complexity on Revit Server. I am running with SP1 & SP2 installed on  During work, Revit just freezes dead!. I cannot do anything. I cant escape, I cant unfreeze it. Its as if its waiting for me to respond to a message but there is no **** message!  When I control Alt Del and try to force shut Revit - Windows tells me Revit is waitng for me to respond. Revit itself throws up a useless message saying I have an uncompleted operation.
I am having a strange issue with 1 of my drawings, it simply refuses to export to *.dgn. it wont give any error message what so ever, just when i go to file -> export -> put in the standard option and hit export nothing happens and returns to the drawing no dgn file is created.
I've tried older drawings of mine and those still work fine and export command does its job.
I have to continually update the views for all of my parts regardless of how many times I change my settings and save. I recently updated to 2013 FDS. I've changed the default template but still no go. The views continually revert back to some default that looks horrible. At times the backgroud display will remain but eventually reverts back to some default. I've updated the document settings, application settings, and template settings but still get the same thing.
