I am having problems with using the rubber stamp tool while
recording an action for a batch process.
The rubber stamp is not being picked up by the action. Is there a way to record
the toolbar functions within an action?
I am having problems with using the rubber stamp tool while recording an action for a batch process. The rubber stamp is not being picked up by the action. Is there a way to record the toolbar functions within an action?
View 2 Replies View RelatedI upgraded to CS6 two weeks ago and so far I haven't recorded a single action that has not been EFFED UP in some way! I'll record the action on a test file, but when I run it on another file or a batch of files it will have at least one bizarre mistake...like the saturation will be set to 100%...or a channel in Selective Color might be set to -78%...or the opacity of a layer will be 100% instead of whatever lesser value I set it to when I recorded the action! I check the test file and it is always fine.
View 26 Replies View RelatedI've been using PS for a long time now but never really had to use the actions in PS, now I know how to record actions in a specific order and whatnot, but I have a minor issue; I have about 2220 images I need to re-size, crop, cut certain pixels etc. etc. etc. out of - all these images are and will be the same size when I'm done, but the thing is I don't know how to get the program to do all the pictures on it's own.
My first step I recorder was opening the image, so I opened the first image, made all the required adjustments to it, saved it, and closed it. Now if I play the actions all over it opens the one image I opened when I did the recording and goes through the steps and that's it - but I want it to open the next image and go through the same steps, and the next one, and the next one and so on.
I just upgraded to CC from CS4. In CS4, when recording an action I could set the rulers to percent and a percentage-based value would be recorded rather than a pixel value. For example, if I recorded the creation of a vector shape that filled the entire canvas, the step in the action would create a 100% by 100% shape, starting at point 0%, 0%. This allowed me to run a batch on varying canvas sizes, and get a shape that filled the canvas no matter the size. In CC, it always records pixel-based values no matter what the rulers are set to.
View 1 Replies View RelatedCS6 seems to only record a path and pen pressure for brush scrokes fails to record brush size and color. When Actions are played the stroke will play with the current foreground color and the current brush size not the color and the size that should have been recorded.
View 15 Replies View RelatedCan PSCS6 record stamp tool strokes in an empty layer? I am unabel to create an action using the stamp tool on an empty layer above the background layer.
The strokes appear in the emty layer but I am not able to replicate the strokes using an action.
Are actions created using the new "allow tool recording" option in PSCS6 backward compatible to previous versions? IOW, would an action created under CS6 using this option play correctly in CS4 or CS5 versions?
View 3 Replies View RelatedI want to record an action which creates an graduation layer and uses the "auto" function layer in the layer settings. But this adjustment will not be saved in the action (up to CS 5.5 this was no problem).Is this possible in CS6, too?
View 2 Replies View RelatedI've tried to figure out the pattern of how the command works for inputting partial customization menu toolbar names but I'm unsuccessful.
You should be able to show and hide partial customization menu toolbars with the -toolbar command because it can hide all toolbars including my partial customization menu toolbars currently shown. I've tried the toolbar menu alias (defined in the CUI command) and the name (refer to this link to the same image embedded below) and none work.
I downloaded a couple of actions from the web to my actions palette and they worked fine, but then I got greedy and downloaded a few more and that’s when things went south. Now none of the actions work - by not working I mean when I mouse over the Play Selection icon at the bottom of the action palette I get that little circle with a line through it. This happens with the PS default actions as well (I also get the circle on the Stop Playing/Recording and Begin Recording icons).
Somewhere in the following is probably what messed things up.
I downloaded actions to my computer in zip files. Copied them over to the actions folder (or somewhere) and unzipped them. I went back to the actions palette and hit “load actions” and loaded them. On the second set of actions that I downloaded I remember thinking “why am I copying and pasting these files - I bet I should cut and paste them, so I did and that may have been the start of the great crumble of 2004. PhotoShop help says: (under Saving and loading actions) “Actions are automatically saved the the Actions Palette folder in PS7.0 Settings folder. If this file is lost or removed, the actions you created are lost”.
I have searched for the settings folder and couldn’t find it, but the actions still show up on the actions palette - they just don’t run.
I’m a little fuzzy on the details on the above steps. In fact, I probably did something different on each download.
one more thing, I reloaded PhotoShop, but still nothing.
My computer crashed and I removed all apps and reinstalled so now none of my actions appear. However I do have a backup file of all of them and want to reinstall but before when I was using cs6 ( Im assuming same thing as CC as it was all on the subscription plan ) I would click actions then the right arrows and it would bring me a big screen of all the actions ( even the ones that were just preloaded in ps ) and it was a big box with all the actions and some options to record etc...Now that box isn't there and it's just a single column drop down menu.
View 1 Replies View RelatedHow do you record an entire image being painted in Photoshop?
View 1 Replies View RelatedI like to put my actions somewhere special on my hardrive, not in apps folder.
Now, in past, when I saved actions CS2 would "remember" where this folder was, making real easy to save.
Lately, it keep defaulting to save as in the app folder-- even though I did navigate to my special area on last save as.
I've recorded an action which resizes images, but for some odd reason, when I play the action it won't.
Does an Image Resize actually work when being 'played' back through an action?
I can not find how to set this new option I want record an action that records brush strokes... Its grayed out in my actions fly-out menu... Does it require OpenGL?
View 4 Replies View RelatedHow do I record an action that will mimic my doing these clicks (assume that I've selected what I want to transform)
Â
1. Edit
2. Transform -> Scale
3. Maintain Aspect Ratio
Â
Now I want it to wait for me to manually adjust the scale, then I'll hit "Enter" when I'm done.
I am working with CS6. Recently I have been recording a few actions that I like to run on a lot of my photos. Before I am done recording these actions I like to group them. Here is where the problem comes into play however...First time I play the action it shows up perfectly in the layer panel. The 2nd,3rd attempt an so on, the action that is grouped (the same action or another grouped action) will show up all jumbled in the layers panel. Sometimes the adjustment layers show up outside of the group while others the group appears to have "eaten" the first group of actions I ran. why can't I stack the actions I have written?
View 3 Replies View RelatedIs there any way to record a Photoshop maneuver like airbrushing onto an otherwise transparent layer so the end result is an animation?The real world equivalent of what I'm trying to do would be to have a video camera behind glass and a spray can spraying the glass from the other side.
Â
I know there are programs that record what's on screen but I don't think they allow you to have a transparent layer. I may be able to use one of those programs and key out the non airbrush background. I'd like to be able to import the animation into Premiere so it looks like paint has been sprayed over whatever clip is underneath the airbrushing frames.
I was recording some actions for photoshop elements using paths and noticed something strange in photoshop cs6 13.01 on windows 8.
.
Recording an action of filling a path or making a selection from a path, didn't seem to record the settings.
Â
Steps to reproduce:
Â
1. Select the Rectangle Tool and set the option to paths in the tool options bar.
Â
2. Draw out a rectangle.
Â
3. Save the workpath in the paths panel by double clicking on the path thumbnail in the paths panel.
Â
4. Make a new action and hit the record button.
Â
5. Try using the Fill Path (from the flyout menu in the paths panel) with dialog and set to whatever option you want.
   (i used 50% Gray in my test)
Â
6. Try using the Make Selection with dialog from the flyout menu in the paths panel.
Â
 Neither action seems to record the parameters (settings). Playing back the action uses whatever the last settings were.
Â
I expected the settings to be recored as photoshop 7 does (second action in the screenshot below) Photoshop cs6 13.01 is the first action shown.
I have trouble recording the brush strokes in PS CS2. The record action feature refuses to record brush strokes and similar actions. I tried to create a path and use the 'stroke path with brush' feature but it doesn't record the path. Any idea on how to get this working?
View 1 Replies View RelatedI have recorded an action that will automatically place a logo in the upper left corner of every image. There are 4 steps after pasting the logo onto the image (and before saving it):
1. Align current layer (using: top edges)
2. Align current layer (using: left edges)
3. Set selection (to: none)
4. Move current layer (to: 0.139 inches, 0.139 inches)
There are no errors when I use File > Automate > Batch on a large number of pictures. However, the problem I'm encountering is that it has recorded the "move current layer" measurements in inches. Since each picture is a different size, it's moving the logo much farther on some pictures than on others.
Is there a way to edit the actions dialog to use pixels when I'm recording an action? Or another alternative way to get it to record the location of the logo so that it's consistent no matter what the size of the picture?
There is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension.
Â
[URL]
Â
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug.
know of a PS plugin or a freestanding app with which I can tweak images based on digital sound patterns? I use PS CS3.
View 8 Replies View RelatedI'm creating a few PS actions and I wrote a piece of text that I want to show by a "insert stop" rule at the begining of every action.
Â
Problem is this: when I copy the text (from TextEdit) and go to the dialogue box on Photoshop, text simply doesn't paste. If i have to write it on every single action it will be a neverending work!
Can I record audio from a mic with pro x4
View 4 Replies View RelatedI am making a video tutorial on using a desktop publishing program. Everything is recording fine EXCEPT when I hover over a tooltip or click for a drop-down box. I can see the tooltips and drop-down boxes during the recording session, but (how odd!) VideoStudio doesn't record them.
When I play the wmv file, the cursor hovers over an invisible tooltip and the cursor moves down the invisible options in the invisible drop-down box.
I have used Camtasia for screen recording for a long time, however I purchased two 24 inch wide screen monitors with a resolution of 1920x1080. Camtasia recording will not record a full screen at this size.......in fact, they recommend 1280x720! So, I updated my VSP from x4 to x5 due to it now having screen capture. VSPX5 will not record full screen 1920x1080 at all (already mentioned in a previous post and currently under reveiw with Corel). It seems the limit is 1676x943 and even then, part of the screen is chopped off if one has a wide screen. Resolution has to be reduced. This is a PITA!
In order to do my screen recordings I either have to reduce the resolution which I do not like to do as it distorts everything on my screen, or reduce the size of the page to record and fit it within a custom size. Not the best, but it's a workaround.
When ever I try to use the 3D features of Photoshop, the program crashes.
View 9 Replies View RelatedI am losing functions in nearly every menu in photoshop. I have tried v.8 and v.10 with the same results... I have no access to nearly every effect menu, the select menu is almost as worthless and I can't do anything on it anymore. The only way to make the function useable is to open an old file that was made back when it was working. I tried reinstalling, after that didn't work it forced me to use a company version of CS3, which has the same problem.
Does anyone know what may be going on? I don't understand what file in my computer may be doing this... If anyone has had any similar problems, please post without hesitation. This is the second photoshop forum I tried, I hope photoshop team can help .
Here are two screenshots of what the effects menu looks like; sorry about the size, I have huge resolution and didn't think about reducing the image size:
I am running windows Vista Ultimate 64-bit and I am mainly trying to fix Photoshop v.8, but fixing this one will evidently fix v.10 as well.
when I use the adjust curves function, I adjust the curves until they look good, then when I render it it changes slightly. Does any one know what causes this, or how to remedy it?
View 1 Replies View Related